scholarly journals Characterization of compisote edible films from aloe vera gel, beeswax and chitosan

10.5219/1177 ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 854-862 ◽  
Author(s):  
Usman Amin ◽  
Muhammad Azam Khan ◽  
Muhammad Ehtasham Akram ◽  
Abdel Rahman Mohammad Said Al-Tawaha ◽  
Alexey Laishevtcev ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Water Vapor ◽  
Food Packaging ◽  
Aloe Vera ◽  
Water Vapor Permeability ◽  
Edible Films ◽  
Vapor Permeability ◽  
Casting Technique ◽  
Edible Packaging ◽  
Superior Mechanical Properties

Environmental consciousness as well as individual’s demand for ready to eat food, recently, has changed the trends in food packaging leading to the development of biodegradable and edible packaging. Emulsified edible films have better transparency, superior mechanical properties and provide barriers to water and other atmospheric gases. Edible films if not consumed, biodegrad chemically. In present study, edible films were, initially, prepared using Chitosan and Aloe vera at different concentrations. Films were then subjected to physical and mechanical testing. Films with 20% Aloe vera had low thickness as compared to films with no Aloe vera. These films also had superior mechanical properties and lower water vapor permeability. Films with 20% Aloe vera were, then, selected and beeswax was dispersed in Chitosan-Aloe vera solution at concentration upto 2.0% followed by film preparation through casting technique. Thickness and water vapor permeability were observed to be improved with increase in concentration of beeswax. Tensile strength of edible films was also improved 1.3 times when concentration of beeswax increased from 0.5 to 2.0%. Percentage elongation decreased with increase in beeswax concentration in the emulsified films. No change in particle size was observed with change in concentration of beeswax. Emulsions were also stable at room temperatures. Decrease in transparency of emulsified edible films was observed with increase in beeswax content in the emulsified films. In addition, cost analysis of the films proved them reasonable to be used as an alternate of synthetic packaging materials.

scholarly journals Preparation and Characterization of Edible Dialdehyde Carboxymethyl Cellulose Crosslinked Feather Keratin Films for Food Packaging

Polymers ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 158
Author(s):  
Yao Dou ◽  
Liguang Zhang ◽  
Buning Zhang ◽  
Ming He ◽  
Weimei Shi ◽  
...  
Keyword(s):  
Water Vapor ◽  
Carboxymethyl Cellulose ◽  
Food Packaging ◽  
Light Transmission ◽  
Value Added ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Edible Films ◽  
Vapor Permeability ◽  
Feather Keratin

The development of edible films based on the natural biopolymer feather keratin (FK) from poultry feathers is of great interest to food packaging. Edible dialdehyde carboxymethyl cellulose (DCMC) crosslinked FK films plasticized with glycerol were prepared by a casting method. The effect of DCMC crosslinking on the microstructure, light transmission, aggregate structure, tensile properties, water resistance and water vapor barrier were investigated. The results indicated the formation of both covalent and hydrogen bonding between FK and DCMC to form amorphous FK/DCMC films with good UV-barrier properties and transmittance. However, with increasing DCMC content, a decrease in tensile strength of the FK films indicated that plasticization, induced by hydrophilic properties of the DCMC, partly offset the crosslinking effect. Reduction in the moisture content, solubility and water vapor permeability indicated that DCMC crosslinking slightly reduced the moisture sensitivity of the FK films. Thus, DCMC crosslinking increased the potential viability of the FK films for food packaging applications, offering a value-added product.

scholarly journals Impact of Olive Extract Addition on Corn Starch-Based Active Edible Films Properties for Food Packaging Applications

Foods ◽  
2020 ◽  
Vol 9 (9) ◽  
pp. 1339
Author(s):  
Arantzazu Valdés García ◽  
Olga B. Álvarez-Pérez ◽  
Romeo Rojas ◽  
Cristobal N. Aguilar ◽  
María Carmen Garrigós
Keyword(s):  
Food Packaging ◽  
Corn Starch ◽  
Radical Scavenging ◽  
Water Vapor Permeability ◽  
Edible Films ◽  
Total Phenolic ◽  
Vapor Permeability ◽  
Antioxidant Power ◽  
Casting Technique ◽  
By Products

Active edible films based on corn starch containing glycerol as a plasticizer and an olive extract obtained from Spanish olive fruit (Olea europaea) by-products (olive extract; OE) at different concentrations (0, 0.05, 0.1 and 0.2 wt%) were prepared by using the casting technique and further solvent-evaporation. OE showed high total phenolic and flavonoids contents and antioxidant activity, which was evaluated by using three different methods: free radical scavenging assay by (1,1-dipheny l-2-picrylhydrazyl) DPPH, 2,2-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) ABTS radical inhibition and ferric reducing antioxidant power (FRAP). The incorporation of OE into the corn starch/glycerol matrix underlined the antioxidant potential and antimicrobial effect against E. coli and S. aureus of these novel active films, being noticeable for films added with 0.2 wt% OE. The developed active films showed a clear thermo-oxidative stability improvement with OE incorporation, in particular at 0.2 wt% loading with an increase of around 50 °C in the initial degradation temperature (Tini) and oxidation onset temperature (OOT). The functional properties of control films were also improved with OE addition resulting in a decrease in Young’s modulus, elongation at break, shore D hardness and water vapor permeability. The present work suggested the potential of the developed corn starch-based edible films as low-price and sustainable food packaging systems to prevent the oxidative deterioration of packaged foodstuff while reducing also the generation of olive by-products.

Research on Preparation and Properties of Edible Composite Protein Films

2011 ◽  
Vol 87 ◽  
pp. 213-222 ◽  
Author(s):  
Gui Yun Chen ◽  
Qiao Lei
Keyword(s):  
Mechanical Properties ◽  
Water Vapor ◽  
Water Solubility ◽  
Water Vapor Permeability ◽  
Sodium Caseinate ◽  
Barrier Properties ◽  
Edible Films ◽  
Protein Isolate ◽  
Vapor Permeability ◽  
Protein Films

Edible films based on whey protein isolate and sodium caseinate were prepared by uniform design method. Glycerol has been incorporated into the edible films as a plasticizer. For all types of films, the influences of components and forming temperature on film properties, such as mechanical properties, water solubility, optical properties, gas and water vapor permeability were investigated. The results suggested that glycerol was the most important factor influencing all the properties of edible composite protein films. However, both increases of sodium caseinate concentration and glycerol content contributed to decrease the barrier properties of gas and water vapor. Among the films studied, group D (prepared with 5% whey protein isolate, 2% sodium caseinate, 50% glycerol at the temperature of 50 °C) showed moderate mechanical properties, optical properties, water solubility and maximum barrier properties of gas and water vapor, with tensile strength=5.85MPa, elongation=101.20%, transparency=91.4%, gas permeability rate=49.92cm3m-2d-10.1MPa-1and water vapor permeability of 0.128×10-11g m-1s-1Pa-1, 0.260×10-11g m-1s-1Pa-1, 0.513×10-11g m-1s-1Pa-1, 1.252×10-11g m-1s-1Pa-1at the RH gradient of 10-40%, 10-50%, 10-60%, 10-70%, respectively.

Elucidating the Relationship Between Structure and Property of Waterborne Polyurethane-Cellulose Nanocrystals Nanocomposite Films

2020 ◽  
Vol 12 (8) ◽  
pp. 1213-1224
Author(s):  
Ya-Yu Li ◽  
Wei-Wen Jing ◽  
Jian-Hua Wang ◽  
Jun-Fang Li
Keyword(s):  
Water Vapor ◽  
Cellulose Nanocrystals ◽  
Food Packaging ◽  
Mechanical Performance ◽  
Water Vapor Permeability ◽  
Waterborne Polyurethane ◽  
Optical Transmittance ◽  
Nanocomposite Films ◽  
Vapor Permeability ◽  
Casting Technique

Cellulose nanocrystals (CNCs) are promising polymer reinforcements owning to their biocompatibility and high elastic modulus, low density, nano size, and inherent biocompatibility. The waterborne polyurethane-cellulose nanocrystals (WPU-CNCs) nanocomposite films were prepared using the conventional solvent casting technique over a whole composition. The mechanical performance, optical transmittance, amphiphilicity, water vapor permeability (WVP), and oxygen permeability (OP) of these WPU-CNCs films were evaluated. The incorporation of CNCs into WPU resulted in a significant enhancement of Young's modulus and tensile strength. The WVP of nanocomposite films had a lowest value at CNCs content of 50 wt.%. Upon the increase of CNCs content from 0 to 90 wt.%, the transmission path of oxygen molecular through the nanocomposite films became more tortuous, leading to drastic decrease in the OP. These WPU-CNCs nanocomposite films with high strength, optical transparency, water vapor and oxygen barrier properties have the potential applications in biomedical, furniture coating, and food packaging fields.

scholarly journals Effect of Clay Nanofillers on the Mechanical and Water Vapor Permeability Properties of Xylan–Alginate Films

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2279
Author(s):  
Darrel S. Naidu ◽  
Maya J. John
Keyword(s):  
Optical Properties ◽  
Water Vapor ◽  
Water Sorption ◽  
Food Packaging ◽  
Water Vapor Permeability ◽  
Nanocomposite Films ◽  
Vapor Permeability ◽  
Solvent Casting ◽  
Casting Technique ◽  
Silicate Layers

In this study, xylan–alginate-based films were reinforced with nanoclays (bentonite or halloysite) by the solvent casting technique. The effect of the nanoclay loadings (1–5 wt %) on various properties—mechanical, optical, thermal, solubility, water sorption, and water vapor permeability (WVP)—of the xylan–alginate films were examined for their application as food packaging materials. A 5 wt % loading of either bentonite or halloysite resulted in a 49% decrease of the WVP due to the impermeable nature of the silicate layers that make up both bentonite and halloysite. Thermal stability and solubility of the nanocomposite films were not significantly influenced by the presence of the nanoclays, whereas the optical properties were significantly improved when compared to neat xylan–alginate blend. In general, films reinforced with bentonite exhibited superior mechanical and optical properties when compared to both halloysite-based nanocomposite and neat films.

Sign in / Sign up

Export Citation Format

Share Document