scholarly journals Warehouse Management and Operational Performance of Clearing and Forwarding Companies in Rwanda: A Case of Gorrila Logistics Ltd

2021 ◽  
Vol 5 (2) ◽  
pp. 39-49
Author(s):  
Ruburika Vedaste ◽  
◽  
Paul Munene Muiruri
Keyword(s):  
Operational Performance ◽  
Warehouse Management

Downhill Running to Enhance Operational Performance in Mountain Terrains: Report No. 94-36

1994 ◽  
Author(s):  
P. G. Law ◽  
H. W. Goforth ◽  
W. K. Prusaczyk ◽  
T. Sopchick-Smith ◽  
A. C. Vailas
Keyword(s):  
Operational Performance ◽  
Downhill Running ◽  
Mountain Terrains

Perencanaan Pengendalian Kualitas Produk Pakaian Bayi dengan Metode Six Sigma Pada CV. AGP

JEMAP ◽  
2020 ◽  
Vol 3 (1) ◽  
Author(s):  
Albertus Reynaldo Kurniawan ◽  
Bayu Prestianto
Keyword(s):  
Quality Control ◽  
Continuous Improvement ◽  
Six Sigma ◽  
Screen Printing ◽  
Control Method ◽  
Operational Performance ◽  
Machine Maintenance ◽  
Quality Product ◽  
Break Time ◽  
And Control

Quality control becomes an important key for companies in suppressing the number of defective produced products. Six Sigma is a quality control method that aims to minimize defective products to the lowest point or achieve operational performance with a sigma value of 6 with only yielding 3.4 defective products of 1 million product. Stages of Six Sigma method starts from the DMAIC (Define, Measure, Analyze, Improve and Control) stages that help the company in improving quality and continuous improvement. Based on the results of research on baby clothes products, data in March 2018 the percentage of defective products produced reached 1.4% exceeding 1% tolerance limit, with a Sigma value of 4.14 meaning a possible defect product of 4033.39 opportunities per million products. In the pareto diagram there were 5 types of CTQ (Critical to Quality) such as oblique obras, blobor screen printing, there is a fabric / head cloth code on the final product, hollow fabric / thin fabric fiber, and dirty cloth. The factors caused quality problems such as Manpower, Materials, Environtment, and Machine. Suggestion for consideration of company improvement was continuous improvement on every existing quality problem like in Manpower factor namely improving comprehension, awareness of employees in producing quality product and improve employee's accuracy, Strength Quality Control and give break time. Materials by making the method of cutting the fabric head, the Machine by scheduling machine maintenance and the provision of needle containers at each employees desk sewing and better environtment by installing exhaust fan and renovating the production room.

Evaluating the Operational Performance of Manufacturing Enterprises: An Evaluation Framework and Application to Pakistani Industry

1985 ◽  
Vol 24 (3-4) ◽  
pp. 703-719 ◽  
Author(s):  
Abdul Hafeez Shaikh
Keyword(s):  
Performance Evaluation ◽  
Final Section ◽  
Technology Development ◽  
Evaluation Framework ◽  
Relative Performance ◽  
Operational Performance ◽  
Special Focus ◽  
Manufacturing Enterprises ◽  
Private And Public

This study has two objectives; (i) to develop a framework for evaluating the operational performance of manufacturing enterprises, and (ii) to evaluate the trend in the performance of Pakistan's vegetable ghee industry for the 1970- 1980 period, with special focus on its relative performance under private and public ownerships. Section II is devoted to the vegetable ghee industry itself - its technology, development, pricing and distribution policies. In Section III a framework for performance evaluation is developed. In Section IV we evaluate in a series of steps - the performance of Pakistan's vegetable ghee industry. The final section is devoted to concluding comments.

Structural Mediation Model of Information System and Sustainable Performance of UAE Manufacturing Sector

2020 ◽  
Vol 11 (2) ◽  
Author(s):  
Mohamed Ahmed Darwish Abdulla Larii ◽  
◽  
Fatma Ahmed Lari ◽  
Mohamed Ahmed Darwish Abdulla Lari ◽  
◽  
...  
Keyword(s):  
Information System ◽  
Manufacturing Sector ◽  
Organisational Culture ◽  
The Body ◽  
Mediating Effect ◽  
Operational Performance ◽  
Manufacturing Companies ◽  
Mediation Model ◽  
Sustainable Performance ◽  
The Relationship

This study intends to find out the mediating effect of organisational culture on the relationship between information system and sustainable performance of manufacturing sector in UAE. This study used AMOS-SEM software to develop mediation model that linking the mediating relationships between Information System, Organisational Culture and Sustainable operation Performance. Data was collected through questionnaire survey among the operation staff of Abu Dhabi manufacturing companies. A total 250 questionnaires were distributed however 205 were returned and only 200 are valid which indicates a response rate of 80%. The analysis found that TPS has positive but not significant effect to SP; OIS has positive but not significant effect to SP; FMW has a positive and significant effect on SP; SDS has a negative and not significant effect to SP and SP has positive but not significant effect OC. For the path relationship between the four exogenous variables (TPS, OIS, SDS, and FMW) and the mediator variable (OC), the results are TPS has positive and significant effect to OC; OIS has positive but not significant effect to OC; FMW has positive and significant effect to OC and SDS has positive and not significant effect to OC. Collectively, the five exogenous constructs (TPS, OIS, SDS, FMW and OC) explained 89% variation in operational performance and 86% of the variation in organisational culture. However, for a mediator, it was found that OC has no significant mediating effect on the relationship between TPS and SP; OC has no significant mediating effect on the relationship between OIS and SP; OC has no significant mediating effect on the relationship between SDS and SP and OC has no significant mediating effect on the relationship between FMW and SP. it can be concluded that there is a positive relationship between information system dimensions and operational performance. However organizational culture has no contributing any mediating effect to the relationship. These findings have contributed to the body of knowledge and could be shared among the UAE manufacturing practitioners.

Development of the automated information system «clean district» for control of cleaning of streets in the city of Krasnoyarsk

2020 ◽  
pp. 77-83
Author(s):  
A. Popov ◽  
O.N. Lopateeva ◽  
A.K. Ovsyankin ◽  
M. M. Satsuk ◽  
A. A. Artyshko ◽  
...  
Keyword(s):  
Information System ◽  
Quality Control ◽  
High Performance ◽  
Operational Performance ◽  
Development Environment ◽  
Integrated Development ◽  
Central District ◽  
Effective Performance ◽  
Automated Information System ◽  
The City

Among the measures aimed at the effective performance of public services in a modern urban environment, one of the main is the quality control and efficiency of the work performed. Timely street cleaning is hampered by several groups of problems, including the lack of a single automated information system (AIS) control of the work performed. In this regard, there is a need to improve and automate this area. This approach will allow you to combine high performance due to the speed of the system and effective quality control of street cleaning. The purpose of this work is the study and analysis of existing information systems (is), allowing to automate the process of quality control and operational performance of the above tasks. On the basis of the conducted researches, to develop is, having coordinated with the customer (administration of the Central district of Krasnoyarsk) requirements and functionality which allow to automate this process.This article presents the main aspects of the design and software solutions for the implementation of the algorithm in the form of AIS, designed to automate the process of monitoring the cleanliness of streets in the city. The development of AIS was conducted in the PhpStorm integrated development environment in the PHP programming language.

Using Ansys for Design and Numerical Study of a Specific Fixed Wing UAV

2018 ◽  
Vol 55 (4) ◽  
pp. 652-657 ◽  
Author(s):  
Gabriel Murariu ◽  
Razvan Adrian Mahu ◽  
Adrian Gabriel Murariu ◽  
Mihai Daniel Dragu ◽  
Lucian P. Georgescu ◽  
...  
Keyword(s):  
Numerical Simulations ◽  
Unmanned Aerial Vehicle ◽  
Numerical Study ◽  
Flight Time ◽  
Cluster System ◽  
Numerical Results ◽  
Operational Performance ◽  
Gliding Flight ◽  
Aerial Vehicle ◽  
Constant Altitude

This article presents the design of a specific unmanned aerial vehicle UAV prototype own building. Our UAV is a flying wing type and is able to take off with a little boost. This system happily combines some major advantages taken from planes namely the ability to fly horizontal, at a constant altitude and of course, the great advantage of a long flight-time. The aerodynamic models presented in this paper are optimized to improve the operational performance of this aerial vehicle, especially in terms of stability and the possibility of a long gliding flight-time. Both aspects are very important for the increasing of the goals� efficiency and for the getting work jobs. The presented simulations were obtained using ANSYS 13 installed on our university� cluster system. In a next step the numerical results will be compared with those during experimental flights. This paper presents the main results obtained from numerical simulations and the obtained magnitudes of the main flight coefficients.

Sign in / Sign up

Export Citation Format

Share Document