scholarly journals Performance of carrot genotypes at two Jequitinhonha Valley sites

2015 ◽  
Vol 36 (6Supl2) ◽  
pp. 4059
Author(s):  
Gustavo Antônio Mendes Pereira ◽  
Maxwel Coura Oliveira ◽  
Altino Júnior Mendes Oliveira ◽  
José Sebastião Cunha Fernandes ◽  
Valter Carvalho de Andrade Júnior ◽  
...  
Keyword(s):  
Dry Matter ◽  
Block Design ◽  
Total Yield ◽  
Soil Conditions ◽  
Root Yield ◽  
Shoot Height ◽  
Climate Conditions ◽  
Randomized Complete Block Design ◽  
Commercial Yield ◽  
The Town

The successful commercial use of carrot depends on the choice of cultivars that are well-adapted to soil and climate conditions at the cultivation site and on good consumer acceptance. The objective of this study was to evaluate the performance of carrot cultivars grown in autumn-winter in two towns with different climatic characteristics, in the High Jequitinhonha Valley, MG, Brazil. The experiments were conducted on the Rio Manso farm, in the town of Couto de Magalhães de Minas and on Campus JK at UFVJM, in the town of Diamantina, Minas Gerais, Brazil. Six carrot cultivars (Brasília, Nantes, Kuronan, Esplanada, Planalto and Tornado) were evaluated using a randomized complete block design with three replicates. The following morpho-agronomic characteristics were evaluated 100 days after sowing: shoot height, root length, root dry matter, total dry matter, harvest index, commercial yield and total yield root. The most suitable cultivars in Diamantina were Planalto, Tornado and Kuronan, and the cultivatar Planalto was the best suited to Couto de Magalhães de Minas. The agronomic performance of the cultivars was higher in Couto de Magalhães de Minas for the majority of the study variables, resulting in a higher total yield and commercial root yield. The climatic and soil conditions of Diamantina induced flowering in most cultivars, causing a loss to the commercial yield in autumn-winter cultivation.

scholarly journals Performance of carrot genotypes at two Jequitinhonha Valley sites

2015 ◽  
Vol 36 (6Supl2) ◽  
pp. 4059
Author(s):  
Gustavo Antônio Mendes Pereira ◽  
Maxwel Coura Oliveira ◽  
Altino Júnior Mendes Oliveira ◽  
José Sebastião Cunha Fernandes ◽  
Valter Carvalho de Andrade Júnior ◽  
...  
Keyword(s):  
Dry Matter ◽  
Block Design ◽  
Total Yield ◽  
Soil Conditions ◽  
Root Yield ◽  
Shoot Height ◽  
Climate Conditions ◽  
Randomized Complete Block Design ◽  
Commercial Yield ◽  
The Town

<p>The successful commercial use of carrot depends on the choice of cultivars that are well-adapted to soil and climate conditions at the cultivation site and on good consumer acceptance. The objective of this study was to evaluate the performance of carrot cultivars grown in autumn-winter in two towns with different climatic characteristics, in the High Jequitinhonha Valley, MG, Brazil. The experiments were conducted on the Rio Manso farm, in the town of Couto de Magalhães de Minas and on Campus JK at UFVJM, in the town of Diamantina, Minas Gerais, Brazil. Six carrot cultivars (Brasília, Nantes, Kuronan, Esplanada, Planalto and Tornado) were evaluated using a randomized complete block design with three replicates. The following morpho-agronomic characteristics were evaluated 100 days after sowing: shoot height, root length, root dry matter, total dry matter, harvest index, commercial yield and total yield root. The most suitable cultivars in Diamantina were Planalto, Tornado and Kuronan, and the cultivatar Planalto was the best suited to Couto de Magalhães de Minas. The agronomic performance of the cultivars was higher in Couto de Magalhães de Minas for the majority of the study variables, resulting in a higher total yield and commercial root yield. The climatic and soil conditions of Diamantina induced flowering in most cultivars, causing a loss to the commercial yield in autumn-winter cultivation.</p>

scholarly journals Effect of nitrogen and phosphorus fertilization sources on the potato crop yield (Solanum tuberosum L.)

2020 ◽  
Vol 73 (3) ◽  
pp. 9255-9261
Author(s):  
Rember Pinedo-Taco ◽  
Tulio Olivas-Alvarado ◽  
Gilberto Rodríguez-Soto ◽  
Viviana Castro-Cepero
Keyword(s):  
Solanum Tuberosum ◽  
Crop Yield ◽  
Solanum Tuberosum L ◽  
Potato Crop ◽  
Block Design ◽  
Total Yield ◽  
Phosphorus Fertilization ◽  
Nitrogen And Phosphorus ◽  
Climate Conditions ◽  
Commercial Yield

Potato (Solanum tuberosum L.) is a demanding crop regarding fertilization practices, and its productivity also depends on the variety used, environmental conditions, soil fertility, and crop management. The aim of this study was to investigate the effect of the interaction of nitrogen and phosphorus fertilization sources on potato crop yield. A randomized block design with a 3×3 factorial arrangement, nine treatments, and four repetitions was established. INIA-303 Canchan was the variety evaluated using three nitrogen fertilization sources: ammonium nitrate (AN), ammonium sulfate (AS), and urea. Also, three phosphorus sources were used: monoammonium phosphate (MAP), diammonium phosphate (DAP), and triple superphosphate (TSP). Total yield, commercial yield, tuber number per plant, and tuber weight per plant were studied. INIA-303 Canchan variety showed positive responses to the combinations of nitrogen and phosphorus fertilization according to the soil and climate conditions where the research was carried out. AN+DAP was the combination with the highest total yield, commercial yield, number, and weight of tubers per plant (P<0.01).The fertilization mixtures of AN+DAP, AS+MAP, and AN+MAP, applied on the INIA-303 Canchan potato variety, can be recommended to achieve yields between 32.45 t ha-1 and 33.98 t ha-1

Nitrogen Demand of Cut Chrysanthemums in Relation to Shoot Height and Planting Date

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 523c-523
Author(s):  
Siegfried Zerche
Keyword(s):  
Dry Matter ◽  
Plant Density ◽  
Plant Biomass ◽  
N Uptake ◽  
Planting Date ◽  
Dry Matter Accumulation ◽  
Planting Dates ◽  
Shoot Height ◽  
Climate Conditions ◽  
Growing Period

Refined nutrient delivery systems are important for environmentally friendly production of cut flowers in both soil and hydroponic culture. They have to be closely orientated at the actual nutrient demand. To solve current problems, express analysis and nutrient uptake models have been developed in horticulture. However, the necessity of relatively laborious analysis or estimation of model input parameters have prevented their commercial use up to now. For this reason, we studied relationships between easily determinable parameters of plant biomass structure as shoot height, plant density and dry matter production as well as amount of nitrogen removal of hydroponically grown year-round cut chrysanthemums. In four experiments (planting dates 5.11.91; 25.3.92; 4.1.93; 1.7.93) with cultivar `Puma white' and a fixed plant density of 64 m2, shoots were harvested every 14 days from planting until flowering, with dry matter, internal N concentration and shoot height being measured. For each planting date, N uptake (y) was closely (r2 = 0.94; 0.93; 0.84; 0.93, respectively) related to shoot height (x) at the time of cutting and could be characterized by the equation y = a * × b. In the soilless cultivation system, dry matter concentrations of N remained constant over the whole growing period, indicating non-limiting nitrogen supply. In agreement with constant internal N concentrations, N uptake was linearly related (r2 = 0.94 to 0.99) to dry matter accumulation. It is concluded that shoot height is a useful parameter to include in a simple model of N uptake. However, in consideration of fluctuating greenhouse climate conditions needs more sophisticated approaches including processes such as water uptake and photosynthetically active radiation.

scholarly journals Evaluation of improved cassava genotypes for yield and related traits for a better breeding strategy under different agroecologies in Nigeria

Euphytica ◽  
2021 ◽  
Vol 217 (4) ◽  
Author(s):  
N. A. Adetoro ◽  
O. O. Oworu ◽  
A. L. Nassir ◽  
A. Bello ◽  
E. Parkes ◽  
...  
Keyword(s):  
Plant Height ◽  
Dry Matter ◽  
Block Design ◽  
Pasting Properties ◽  
Growth And Yield ◽  
Root Weight ◽  
Root Yield ◽  
Root Characteristics ◽  
Stay Green ◽  
Fresh Root

AbstractThis study aimed at determining shoot and root characteristics of cassava as affected by root yield and the influence of soil moisture on vegetative growth and yield. Thirty cassava genotypes were evaluated for morphological and physiological characterization in three locations in Nigeria: Ibadan, Mokwa and Zaria. Randomized complete block design was used with four replicates. Studies on the pasting properties of the genotypes were also carried out. Data were collected on plant height, stem girth, stay-green ability, garri and fresh root weight. Genotypes differed significantly (P < 0.05) across and within locations for shoot and root characteristics. Across locations, genotype 011663 had the highest plant height (132.4 cm); 30572 had the largest stem girth (8.6 cm); and 010040 was the best stay-green (2.2). Genotype 011086 had the highest number of roots per plot (95.7), 950289 had the highest fresh root yield (24.3 t/ha), and 990554 had the highest percentage of dry matter (35.2). Trends in root yields across locations were Ibadan (28.9 t/ha), Mokwa (20.3 t/ha), and Zaria (8 t/ha). Five genotypes IITA-TMS-IBA950289, 010034, 990554, 011807, and 980581 had negligible interactions with the environment and so have broad adaptation and are considered stable; and two clones 011807 and 950166 were found to be the best for pasting properties. Breeding strategies that consider root size, total root number, harvest index, dry matter, with applications for household foods and industrial uses, will be an effective and efficient way to select genotypes for high yield.

scholarly journals Residual effects of superficial liming on tropical soil under no-tillage system

2016 ◽  
Vol 51 (9) ◽  
pp. 1633-1642 ◽  
Author(s):  
Claudio Hideo Martins da Costa ◽  
Carlos Alexandre Costa Crusciol ◽  
Jayme Ferrari Neto ◽  
Gustavo Spadotti Amaral Castro
Keyword(s):  
Grain Yield ◽  
Dry Matter ◽  
Block Design ◽  
Residual Effects ◽  
Available Phosphorus ◽  
Long Term Effects ◽  
Matter Production ◽  
Randomized Complete Block Design ◽  
Tillage System

Abstract The objective of this work was to evaluate the long-term effects of the surface application of lime on soil fertility and on the mineral nutrition and grain yield of soybean, and of black oat and sorghum in crop succession. The experiment was carried out on a clayey Oxisol, in a randomized complete block design, with four replicates. Treatments consisted of lime the rates of 0, 1,000, 2,000, and 4,000 kg ha-1, applied in October 2002 and November 2004. Soil samples were collected at five soil layers, down to 0.60-m depth. Surface liming was effective in reducing soil acidity and increasing Ca2+ and Mg2+ contents in the subsurface. Moreover, it increased available phosphorus contents and soil organic matter in the long term (48 to 60 months after the last lime application). Surface liming improved plant nutrition, mainly for N, Ca, and Mg, and increased dry matter production and grain yield of the crops, even in years with regular distribution of rainfall. The greatest productivities of soybean, black oat, and sorghum were obtained with the respective estimated lime doses of 4,000, 2,333, and 3,281 kg ha-1, for shoot dry matter, and of 2,550, 3,555, and over 4,000 kg ha-1, for grain yield.

scholarly journals Pruning of the main stem of Marigold: effect on capitula yield

2017 ◽  
Vol 35 (3) ◽  
pp. 425-427
Author(s):  
Jana Koefender ◽  
André Schoffel ◽  
Diego P Golle ◽  
Candida E Manfio ◽  
Alice PB Dambróz ◽  
...  
Keyword(s):  
Dry Matter ◽  
Block Design ◽  
Factorial Experiment ◽  
Main Stem ◽  
Flower Bud ◽  
Fresh Matter ◽  
Randomized Complete Block Design

ABSTRACT The purpose of this work was to evaluate the influence of cutting the apex of the main stem of marigold plants on floral capitula yield. The experiment was carried out in a randomized complete block design, with five replicates. The following removal stages of the main stem apexes were studied: control (without pruning), up to 10 leaves, up to 15 leaves and visible flower bud. Three harvest periods were also evaluated: July, August and September, composing a factorial experiment in a 4x3 arrangement. The diameter, number, fresh matter and the dry capitula were evaluated. The most significant effect of cutting the apex of the main stem on fresh and dry matter of the capitula was obtained when the technique was performed at the time the plants had up to 15 leaves and visible flower bud. The harvesting performed in September showed to be the most promising, since it presented the larger diameter, higher number and higher fresh matter and the dry capitula.

scholarly journals Effect of Zinc and Boron on Growth and Yield of Okra (Abelmoschus esculentus L.)

2020 ◽  
pp. 41-47
Author(s):  
Nusrat Jahan ◽  
Md. Ashabul Hoque ◽  
Md. Rasal-Monir ◽  
Sumya Fatima ◽  
Mohammad Nurul Islam ◽  
...  
Keyword(s):  
Dry Matter ◽  
Block Design ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Growth And Yield ◽  
Area Index ◽  
Spad Value ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
Fruit Diameter

The study was carried out to find out the effect of zinc (Zn) and boron (B) on growth and yield of okra (BARI Dherosh 1). The experiment was laid out in Randomized Complete Block Design (RCBD) with three replications. The treatments of the experiment were, T0 (without Zn or B), T1 (20 kg Zn ha-1), T2 (30 kg Zn ha-1), T3 (10 kg B ha-1), T4 (20 kg B ha-1), T5 (20 kg Zn ha-1 + 10 kg B ha-1), T6 (20 kg Zn ha-1 + 20 kg B ha-1), T7 (30 kg Zn ha-1 + 10 kg B ha-1) and T8 (30 kg Zn ha-1 + 20 kg B ha-1) were undertaken to evaluate the best results of the study. The highest plant height was found in T8 (30 kg Zn ha-1 + 20 kg B ha-1) but the highest number of leaves plant-1 was recorded from T7 (30 kg Zn ha-1 + 10 kg B ha-1). On the other hand, the maximum leaf area index, SPAD value, mean fruit weight, fruit length, fruit diameter, fruit dry matter (%), number of fruits plant-1, fresh fruit weight plant-1 , fruit yield plot-1 and fruit yield ha-1 were found in T7 (30 kg Zn ha-1 + 10 kg B ha-1), while the control (T0) showed lowest performance for the respected parameters. It is strongly concluded that 30 kg Zn ha-1 with 10 kg B ha-1 combination may be helpful for okra cultivation in the field level to increase okra production.

scholarly journals Effect of Seeding Rate On Growth And Yield Of Okra (Abelmoschus Esculantus) In Zuru Northern Guinea Savanna Of Nigeria

2018 ◽  
Vol 6 (02) ◽  
Author(s):  
Yohanna J, A. ◽  
Muhammad A, M.
Keyword(s):  
Block Design ◽  
Total Yield ◽  
Growth And Yield ◽  
Land Resource ◽  
Seeding Rate ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
Resource Space ◽  
Plant Stand ◽  
The Mean

Field experiment was carried out during 2010 rainy season to find the effect of seeding rate on the growth and yield of okra (Abelmuschus esculentus) in Zuru Northern Guinea Savannah. Zuru is located in Zuru Local government area of Kebbi State (Latitude 11o 251 to 11o 551 North and Longitude 4o 51 to 5o 251 East of the equator). The experiment consisted of three treatments that is planting okra at one plant per stand (S1), two plants per stand (S2) and three plants per stand (S3). The experiment was laid out in randomized complete block design (RCBD) and the treatments replicated three time. The result of the experiment has shown that plant height and number of leaves/plant at 3, 6 and 9 weeks after planting (    WAP) were significantly influenced by seeding rate (P<0.05). At 3, 6 and 9 WAP tallest plants were obtained from okra plants planted at three plants/stand (27.83, 54.0 and 77.0cm) respectively followed by okra planted at two plant/stand (24.77, 50.67 and 74.33 leave/plant respectively ). However, more number of leaves/plant were obtained from okra plant at one plant/stand (9.67, 24.67 and 48.0 leaves/plant respectively) followed by okra planted at two plants/stand (8.33, 18.33 and 36.33 leaves/plant respectively). Seeding rate had significant influence on time of 50 percent flowering with one plant/stand first attaining 50 percent flowering stage just within 36.33 days followed by okra planted at two plants/stand (38 days). The mean fresh fruit yield of okra was also significantly influenced by seeding rate with the highest yield of fresh fruits obtained from three plants/stand (83.34/ha) followed by okra planted at two plants/stand (55.56/ha). However, the result of the findings recommends that, okra should be planted at two plants/stand for medium sized and marketable okra fresh fruits since at three plants/stand leads to the production of undersized fresh fruits which do not often attract customers. At one plant/stand, there seemed to be early fruiting and bigger sized fresh fruits but low total yield due to underutilization of land resource/space. Planting at one plant/stand should therefore be avoided

scholarly journals Yield and soil insect resistance in sweet potato clones

2019 ◽  
Vol 35 (6) ◽  
Author(s):  
Daiane da Silva Nóbrega ◽  
José Ricardo Peixoto ◽  
Michelle Souza Vilela ◽  
Anne Kelly da Silva Nóbrega ◽  
Elaine Caetano Santos ◽  
...  
Keyword(s):  
Sweet Potato ◽  
Ipomoea Batatas ◽  
Starch Content ◽  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Soil Conditions ◽  
Root Yield ◽  
Pests And Diseases ◽  
Soil Insects

Sweet potato (Ipomoea batatas) is a rustic horticultural crop with high production potential. However, the crop is susceptible to many pests and diseases. The objective of this study was to evaluate 10 genotypes of sweet potato regarding their yield and resistance to soil insects, under Brazilian cerrado soil conditions. Genotypes were selected from the Sweet Potato Germplasm Bank of Embrapa Hortaliças. The experiment was conducted at Água Limpa Farm, belonging to University of Brasilia (UnB), and consisted of a randomized block design, with 10 treatments (genotypes), 10 plants per plot, and four replications. The following traits were analyzed: number of perforations per root, incidence of roots injured by insects, plant resistance degree, root shape, total and marketable root yields, root peel color, root pulp color, pulp total soluble solids, pulp titratable acidity, pulp TSS/TA ratio, pulp moisture, and pulp starch yield. Genotype CNPH 53 (26.78 t ha-1) presented total root yield greater than the commercial variety Brazlândia Rosada (17.54 t ha-1). Genotype Santa Sofia (11.77 t ha-1) and Brazlândia (13.5 t ha-1) had similar marketable root yields. CNPH 53 showed the best agronomic performance, exhibiting moderate susceptibility to soil insects and root shape meeting the market standards. It also had low pulp TA (2.53%); high pulp TSS (12.25 °Brix) and pulp TSS/AT ratio (4.24); pulp moisture content close to 70%; and the highest pulp starch content (11.98%). The traits number of perforations per root, root shape, and pulp TA presented heritability values close to 70%. Marketable root yield, pulp moisture, and pulp starch content demonstrated heritability values greater than 90% and CVG/CVE greater than 1.

scholarly journals Evaluation of Sweet Pepper (Capsicum annum L.) Varieties as Influnced by Nitrogen Levels in Chitwan, Nepal

2020 ◽  
Vol 14 (1) ◽  
pp. 33-42
Author(s):  
Santosh Lohani ◽  
Moha Dutta Sharma ◽  
Shree Chandra Shah ◽  
Arjun Kumar Shrestha
Keyword(s):  
Block Design ◽  
Total Yield ◽  
Growth Yield ◽  
Sweet Pepper ◽  
Fruit Weight ◽  
Chemical Fertilizer ◽  
Nitrogen Levels ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
Better Than

An experiment was conducted to assess the performance of sweet pepper varieties as influenced by nitrogen levels from August 2014 to February 2015 at Mangalpur, Chitwan. The experiment was laid out in two factorial Randomized Complete Block Design (RCBD) with three replications having sixteen treatments. Varieties and levels of nitrogen significantly affected growth, yield and qualitative parameters of fruits. Hybrid Indra and NS 632 performed better than open pollinated varieties viz. Sagar and California Wonder. Days to fifty percent flowering of NS 632 were earlier than California Wonder. Indra variety had the highest plant height (52.18 cm), number of secondary branches per plant (13.51) from 250 kg N/ha through chemical fertilizer while number of leaves per plant was higher in NS 632 variety (57.22) than Sagar variety (47.37). Indra variety showed the highest fruit weight (87.59 g) and total yield (39.45 t/ha) but NS 632 variety produced more number of fruits per plant (9.25) than California Wonder variety. This study showed that sweet pepper yield of hybrid varieties applied with 250 kg N/ha through chemical fertilizer was appropriate dose to get optimum yield under Chitwan condition.

Sign in / Sign up

Export Citation Format

Share Document