scholarly journals Broadband Dual Polarization Dipole Antenna with Feeding Structure of PCB Coupling

2017 ◽  
Vol 28 (3) ◽  
pp. 163-169
Author(s):  
Chul-Keun Park ◽  
Kyeong-Sik Min
Keyword(s):  
Dipole Antenna ◽  
Dual Polarization ◽  
Feeding Structure

scholarly journals A High-Isolation Dual-Polarization Substrate-Integrated Fabry-Pérot Cavity Antenna

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Chang Chen ◽  
Bo-Liang Liu ◽  
Ling Ji ◽  
Wei-Dong Chen
Keyword(s):  
Near Field ◽  
Ground Plane ◽  
Cross Polarization ◽  
Dual Polarization ◽  
High Isolation ◽  
Fabry Perot ◽  
Feeding Structure ◽  
Operating Bandwidth ◽  
High Degree ◽  
Polarization Level

A dual-polarization substrate-integrated Fabry-Pérot cavity (SI-FPC) antenna is presented in this paper. The patch embedded in SI-FPC is excited with a near-field coupled feeding structure for V-polarization and with a slot-coupled feeding structure for H-polarization. The feeding structures are separated by a ground plane to improve the isolation between the ports. As a design example, an antenna operating at 10.0 GHz is fabricated and measured. A high degree of port isolation (<−40 dB) over the whole operating bandwidth (9.5–10.2 GHz) and good cross-polarization level (>25 dB) can be achieved.

scholarly journals A Dual-Wideband Double-Layer Magnetoelectric Dipole Antenna with a Modified Horned Reflector for 2G/3G/LTE Applications

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Botao Feng ◽  
Weijun Hong ◽  
Shufang Li ◽  
Wenxing An ◽  
Sixing Yin
Keyword(s):  
Double Layer ◽  
Frequency Band ◽  
Lower Layer ◽  
Low Cost ◽  
Impedance Matching ◽  
Ground Plane ◽  
Dipole Antenna ◽  
Dipole Antennas ◽  
Dipole Structure ◽  
Feeding Structure

A novel dual-wideband double-layer magnetoelectric dipole unidirectional antenna with a modified horned reflector for 2G/3G/LTE applications is proposed. Firstly, a double-layer electric dipole structure is presented to provide a dualwideband, whose folded lower layer mainly serves the lower frequency band while the inclined upper layer works for the upper frequency band. In addition, to reduce the size of the antenna and improve impedance matching, a new feeding structure designed with inverted U-shaped and tapered line is introduced. Finally, a modified horn-shaped reflector, instead of a ground plane, is employed to achieve stable and high gains. The antenna prototype can achieve a bandwidth of 24.4% (790 MHz–1010 MHz) with a stable gain of 7.2 ± 0.6 dBi for the lower band, and a bandwidth of 67.3% (1.38 GHz–2.78 GHz) with a gain of 7.5 ± 0.8 dBi for the upper band covering all the frequency bands for 2G/3G/LTE systems. To the best of our knowledge, it is the first double-layer magnetoelectric dipole antenna proposed. Compared with the existing ME dipole antennas, the proposed antenna, which is completely made of copper, can be easily fabricated at low cost and thus is practicable for 2G/3G/LTE applications.

A Simple Ultra-Wideband Magneto-Electric Dipole Antenna With High Gain

Frequenz ◽  
2017 ◽  
Vol 72 (1-2) ◽  
Author(s):  
Chen-yang Shuai ◽  
Guang-ming Wang
Keyword(s):  
Electric Dipole ◽  
Simple Structure ◽  
High Gain ◽  
Dipole Antenna ◽  
Ultra Wideband ◽  
Main Beam ◽  
Impedance Bandwidth ◽  
Practical Applications ◽  
Measurement Results ◽  
Feeding Structure

AbstractA simple ultra-wideband magneto-electric dipole antenna utilizing a differential-fed structure is designed. The antenna mainly comprises three parts, including a novel circular horned reflector, two vertical semicircular shorted patches as a magnetic dipole, and a horizontal U-shaped semicircular electric dipole. A differential feeding structure working as a perfect balun excites the designed antenna. The results of simulation have a good match with the ones of measurement. Results indicate that the designed antenna achieves a wide frequency bandwidth of 107 % which is 3.19~10.61 GHz, when VSWR is below 2. Via introducing the circular horned reflector, the designed antenna attains a steady and high gain of 12±1.5dBi. Moreover, settled broadside direction main beam, high front-to-back ratio, low cross polarization, and the symmetrical and relatively stable radiation patterns in the E-and H-plane are gotten in the impedance bandwidth range. In the practical applications, the proposed antenna that is dc grounded and has a simple structure satisfies the requirement of many outdoor antennas.

scholarly journals A Low-Profile Ferrite Dipole VHF Antenna for Integrated Mast Applications

2020 ◽  
Vol 10 (5) ◽  
pp. 1642
Author(s):  
Won Bin Park ◽  
Son Trinh-Van ◽  
Youngoo Yang ◽  
Kang-Yoon Lee ◽  
Byunggil Yu ◽  
...  
Keyword(s):  
Reasonable Agreement ◽  
Dipole Antenna ◽  
Operating Frequency ◽  
Grid Cells ◽  
Maximum Gain ◽  
Ferrite Layer ◽  
Low Profile ◽  
Feeding Structure ◽  
Simulation Results ◽  
Plate Type

In this paper, an extremely low-profile ferrite dipole antenna operating on the VHF band (30–300 MHz) is proposed. The design antenna consists of 44 plate-type ferrite cells arranged into two stacked ferrite layers: a bottom ferrite layer with 2 × 12 grid cells and a top ferrite layer with 2 × 10 grid cells. The antenna is excited by an electric loop feeding structure and maximum gain performance is achieved when the loop feeding structure has five loops. To validate the performance of the proposed antenna, an antenna prototype is fabricated and tested at an outdoor range. The antenna weighs 1.45 kg and has electrical dimensions of approximately 0.0636 × 0.0112 × 0.0008 λ L 3 at the lowest operating frequency of 30 MHz. The measured realized gain varies from −31.48 to −2.44 dBi within the VHF band. Reasonable agreement is also obtained between the measurement and simulation results. To assess the performance of the proposed antenna, it was mounted on the integrated mast of an offshore patrol vessel (OPV) model. The antenna on the OPV was also simulated and the results discussed.

scholarly journals Magnetoelectric Dipole Antenna with Dual Polarization and High Isolation

2018 ◽  
Vol 2018 ◽  
pp. 1-7
Author(s):  
Xujun Yang ◽  
Lei Ge ◽  
Dengguo Zhang ◽  
Chow-Yen-Desmond Sim
Keyword(s):  
Transmission Lines ◽  
Dipole Antenna ◽  
Cross Polarization ◽  
Radiation Patterns ◽  
Dual Polarization ◽  
High Isolation ◽  
Microstrip Lines ◽  
Directional Radiation ◽  
Dual Polarized ◽  
Coaxial Lines

A dual-polarized aperture-coupled magnetoelectric (ME) dipole antenna is presented in this paper. The feeding network is based on substrate-integrated coaxial lines (SICLs). To describe the effect of the SICL on improving the isolation, the ME dipole with another two different feeding configurations, microstrip lines and striplines, respectively, is compared. As such, the coupling between the transmission lines is tremendously reduced and the isolation between the two input ports of different polarization is enhanced. An antenna prototype is fabricated and tested, exhibiting good performances, including an isolation level of higher than 30 dB between the two input ports and gains of more than 9.5 dBi. Besides, the proposed design is capable of achieving stable directional radiation patterns with cross-polarization levels lower than −22 dB and back radiation levels lower than −24 dB.

scholarly journals Minimum Lens Size Supporting the Leaky-Wave Nature of Slit Dipole Antenna at Terahertz Frequency

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Niamat Hussain ◽  
Truong Khang Nguyen ◽  
Haewook Han ◽  
Ikmo Park
Keyword(s):  
Dipole Antenna ◽  
Center Frequency ◽  
Antenna Gain ◽  
Terahertz Frequency ◽  
Frequency Range ◽  
Leaky Wave ◽  
Wave Antenna ◽  
Wave Nature ◽  
Silicon Lens ◽  
Feeding Structure

We designed a slit dipole antenna backed by an extended hemispherical silicon lens and investigated the minimum lens size in which the slit dipole antenna works as a leaky-wave antenna. The slit dipole antenna consists of a planar feeding structure, which is a center-fed and open-ended slot line. A slit dipole antenna backed by an extended hemispherical silicon lens is investigated over a frequency range from 0.2 to 0.4 THz with the center frequency at 0.3 THz. The numerical results show that the antenna gain responses exhibited an increased level of sensitivity to the lens size and increased linearly with increasing lens radius. The lens with the radius of 1.2λois found to be the best possible minimum lens size for a slit dipole antenna on an extended hemispherical silicon lens.

Sign in / Sign up

Export Citation Format

Share Document