scholarly journals Hydroponic Minituber Production in Growth Room Conditions and Carry-Over Effects of the Technique on Produced Minitubers

2016 ◽  
Vol 9 (1) ◽  
pp. 41 ◽  
Author(s):  
Elina Virtanen ◽  
Jussi Tuomisto
Keyword(s):  
Night Time ◽  
Van Gogh ◽  
Lighting Conditions ◽  
In Vitro Plantlets ◽  
Growing Medium ◽  
Carry Over ◽  
Foliage Development ◽  
Indoor Conditions ◽  
Better Than

<p>The production of minitubers was implemented with a hydroponic technique in growth rooms and the carry-over effects of the technique on the characteristics of minitubers were studied. As a comparison, minitubers from in vitro plantlets were grown in a peat-based growing medium. The results show that hydroponic production of minitubers is successful in indoor conditions with the cultivars Desiree, Van Gogh and Asterix, when day-time growing temperatures of 19.4 <sup>o</sup>C-26.0 <sup>o</sup>C and night-time temperatures of 17.5 <sup>o</sup>C-22.6 <sup>o</sup>C were used. Photosynthetically active illumination was adequate at 2383-2509 umol m<sup>-2</sup>s<sup>-1</sup>; lighting conditions consisted of 14/10-hour day/night cycles.</p><p>The cultivars Desiree and Van Gogh developed their first tuber three weeks faster than Asterix, and the minituber yield was 4.5 per plant for Desiree, 7.5 for Van Gogh and 4.0 for Asterix. When a peat-based growing medium was used, minituber yields were almost the same but the size of the minitubers was smaller than that of hydroponically produced minitubers. The results of the carry-over experiments showed that conventionally produced minitubers emerged faster, and in terms of foliage development and yielding capacity performed better than hydroponically produced minitubers.</p>

scholarly journals Daya hidup planlet karet asal in vitro microcutting pada berbagai periode penutupan sungkup plastik dan komposisi media tumbuh Survival rate of in vitro microcutting-derived rubber plantlets on various plastic cover closed periods and medium compositions

2016 ◽  
Vol 80 (1) ◽  
Author(s):  
. SUMARYONO ◽  
Masna Maya SINTA ◽  
. NURHAIMI-HARIS
Keyword(s):  
Survival Rate ◽  
Hevea Brasiliensis ◽  
Tree Canopy ◽  
Ex Vitro ◽  
Media Composition ◽  
Transparent Plastic ◽  
Growing Medium ◽  
Major Bottleneck ◽  
Better Than

AbstractIn vitro culture through microcutting technology can be used for clonal propagation of rubber (Hevea brasiliensis Muell. Arg.) rootstocks. Acclimatization of in vitro plantlets to ex vitro conditions is a major bottleneck in the micropropagation of many plants.This research was conducted to study the effect of plastic cover closed period and media composition on the survival rate of rubber plantlets. Plantlets derived from microcutting were planted on plastic pots containing a mixture of soil, cocopeat, dung manure, and sand or zeolite. The plantlets were then placed inside a closed transparent plastic cover that opened after 2, 3, 4 and 6 weeks. The cover was placed under tree canopy. The second experiment used the same media composition with or without cocopeat and with sand or zeolite. At 1.5 month after culture, observation was done on the number of survived plantlets, plantlet height and the percentage of rooted plantlets. The results show that the best coverclosed period was six weeks and the best growing medium was a mixture of soil, cocopeat, dung manure, and zeolite (6:2:1:1v/v). On the two combined treatments, the survival rate was 73.3% after 1.5 month of acclimatization. The use of zeolite and a higher soil percentage gave positive influences on rubber plantlet survival rate. The second experiment results confirmed that the use of zeolite was better than sand and the use of cocopeat was definitely needed. It can be concluded that the best of acclimatization of rubber plantlets from microcutting was on a medium mixture of soil, cocopeat, dung manure, and zeolite (6:2:1:1) and placed inside a closed plastic cover for six weeks before the cover was opened gradually. AbstrakKultur in vitro melalui teknologi microcutting dapat digunakan untuk perbanyakan klonal batang bawah tanaman karet (Hevea brasiliensis Muell. Arg.). Aklimatisasi planlet in vitro ke kondisi ex vitro merupakan hambatan utama pada mikropropagasi berbagai jenis tanaman. Penelitian ini dilakukan untuk mempelajari pengaruh lama penutupan sungkup plastik dan komposisi media tumbuh terhadap daya hidup planlet karet. Planlet karet asal microcutting ditanam pada pot plastik berisi media dengan berbagai campuran tanah, cocopeat, pupuk kandang, dan pasir atau zeolit. Planlet selanjutnya diletakkan di dalam sungkup plastik transparan tertutup rapat yang dibuka setelah 2, 3, 4 dan 6 minggu. Sungkup plastik diletakkan di bawah tajuk pepohonan. Percobaan kedua menggunakan komposisi media serupa dengan atau tanpa cocopeat dan dengan pasir atau zeolit. Pada umur 1,5 bulan, pengamatan dilakukan terhadap jumlah planlet yang hidup, tinggi planlet, dan persentase planlet yang berakar. Hasil penelitian menunjukkan bahwa lama penyungkupan terbaik adalah enam minggu dan media tumbuh terbaik adalah campuran tanah, cocopeat, pupuk kandang, dan zeolit (6:2:1:1 v/v). Pada kombinasi kedua perlakuan tersebut, daya hidup planlet karet mencapai 73,3% setelah 1,5 bulan aklimatisasi. Penggunaan zeolit dan persentase tanah yang lebih tinggi berpengaruh positif terhadap daya hidup planlet karet. Hasil percobaan kedua menegaskan bahwa penggunaan zeolit lebih baik daripada pasir dan penggunaan cocopeat mutlak diperlukan. Dapat disimpulkan bahwa aklimatisasi planlet karet asal microcutting terbaik dilakukan pada media campuran tanah, cocopeat, pupuk kandang, zeolit (6:2:1:1) dan diletakkan di dalam sungkup plastik tertutup selama enam minggu sebelum sungkup dibuka secara bertahap.

scholarly journals Genetic Diversity Based on Randomly Amplified Polymorphic DNA (RAPD) and Its Relationship with the Performance of Diploid Potato Hybrids

1997 ◽  
Vol 122 (6) ◽  
pp. 740-747 ◽  
Author(s):  
M.M. Paz ◽  
R.E. Veilleux
Keyword(s):  
Genetic Distance ◽  
Combining Ability ◽  
Rapd Markers ◽  
Tuber Yield ◽  
Genetic Relationships ◽  
Field Evaluation ◽  
Banding Patterns ◽  
In Vitro Plantlets ◽  
Better Than

RAPD analysis was conducted on in vitro plantlets of Solanum phureja Juz. & Buk. monoploids and diploid heterozygous pollinators. Among 60 decamer primers screened, 11 did not show polymorphism while some primers produced complex banding patterns or faint bands that were difficult to score. Genetic distance estimates were based on 151 polymorphic RAPD markers of 208 bands scored using 33 primers. Simple matching and Jaccard coefficients were calculated to estimate genetic similarity (GS). Genetic distance (GD=1-GS) among genotypes ranged from 0.0 to 0.664. Cluster analysis yielded groups of genotypes that were consistent with known genomic compositions or genetic relationships inferred from their pedigree. Field evaluation of 14 F1 families resulting from five S. phureja doubled monoploids (DMs) crossed to three heterozygous pollinators (IDs) revealed significant differences in total tuber number, total tuber yield, average tuber mass, and vigor. Total tuber yield per family ranged from 174 to 404 g per plant and was significantly lower than the control `Kennebec'. The general combining ability of DM BARD 13-14/202 was superior to other DM parents. Specific combining ability was observed in progeny of AD2-4/3s.8 H ID 4. Among male parents, ID 8 performed better than ID 4 or ID 5. Using simple matching, the largest parental genetic distance was always associated with the highest total tuber yield among progenies of DM parents. A similar trend was obtained using Jaccard coefficients. Based on our results, RAPD markers may facilitate the identification of diverse parents to maximize the expression of heterosis in S. phureja hybrids.

scholarly journals Daya hidup planlet karet asal in vitro microcutting pada berbagai periode penutupan sungkup plastik dan komposisi media tumbuh Survival rate of in vitro microcutting-derived rubber plantlets on various plastic cover closed periods and medium compositions

2016 ◽  
Vol 80 (1) ◽  
Author(s):  
. SUMARYONO ◽  
Masna Maya SINTA ◽  
. NURHAIMI-HARIS
Keyword(s):  
Survival Rate ◽  
Hevea Brasiliensis ◽  
Tree Canopy ◽  
Ex Vitro ◽  
Media Composition ◽  
Transparent Plastic ◽  
Growing Medium ◽  
Major Bottleneck ◽  
Better Than

AbstractIn vitro culture through microcutting technology can be used for clonal propagation of rubber (Hevea brasiliensis Muell. Arg.) rootstocks. Acclimatization of in vitro plantlets to ex vitro conditions is a major bottleneck in the micropropagation of many plants.This research was conducted to study the effect of plastic cover closed period and media composition on the survival rate of rubber plantlets. Plantlets derived from microcutting were planted on plastic pots containing a mixture of soil, cocopeat, dung manure, and sand or zeolite. The plantlets were then placed inside a closed transparent plastic cover that opened after 2, 3, 4 and 6 weeks. The cover was placed under tree canopy. The second experiment used the same media composition with or without cocopeat and with sand or zeolite. At 1.5 month after culture, observation was done on the number of survived plantlets, plantlet height and the percentage of rooted plantlets. The results show that the best coverclosed period was six weeks and the best growing medium was a mixture of soil, cocopeat, dung manure, and zeolite (6:2:1:1v/v). On the two combined treatments, the survival rate was 73.3% after 1.5 month of acclimatization. The use of zeolite and a higher soil percentage gave positive influences on rubber plantlet survival rate. The second experiment results confirmed that the use of zeolite was better than sand and the use of cocopeat was definitely needed. It can be concluded that the best of acclimatization of rubber plantlets from microcutting was on a medium mixture of soil, cocopeat, dung manure, and zeolite (6:2:1:1) and placed inside a closed plastic cover for six weeks before the cover was opened gradually. AbstrakKultur in vitro melalui teknologi microcutting dapat digunakan untuk perbanyakan klonal batang bawah tanaman karet (Hevea brasiliensis Muell. Arg.). Aklimatisasi planlet in vitro ke kondisi ex vitro merupakan hambatan utama pada mikropropagasi berbagai jenis tanaman. Penelitian ini dilakukan untuk mempelajari pengaruh lama penutupan sungkup plastik dan komposisi media tumbuh terhadap daya hidup planlet karet. Planlet karet asal microcutting ditanam pada pot plastik berisi media dengan berbagai campuran tanah, cocopeat, pupuk kandang, dan pasir atau zeolit. Planlet selanjutnya diletakkan di dalam sungkup plastik transparan tertutup rapat yang dibuka setelah 2, 3, 4 dan 6 minggu. Sungkup plastik diletakkan di bawah tajuk pepohonan. Percobaan kedua menggunakan komposisi media serupa dengan atau tanpa cocopeat dan dengan pasir atau zeolit. Pada umur 1,5 bulan, pengamatan dilakukan terhadap jumlah planlet yang hidup, tinggi planlet, dan persentase planlet yang berakar. Hasil penelitian menunjukkan bahwa lama penyungkupan terbaik adalah enam minggu dan media tumbuh terbaik adalah campuran tanah, cocopeat, pupuk kandang, dan zeolit (6:2:1:1 v/v). Pada kombinasi kedua perlakuan tersebut, daya hidup planlet karet mencapai 73,3% setelah 1,5 bulan aklimatisasi. Penggunaan zeolit dan persentase tanah yang lebih tinggi berpengaruh positif terhadap daya hidup planlet karet. Hasil percobaan kedua menegaskan bahwa penggunaan zeolit lebih baik daripada pasir dan penggunaan cocopeat mutlak diperlukan. Dapat disimpulkan bahwa aklimatisasi planlet karet asal microcutting terbaik dilakukan pada media campuran tanah, cocopeat, pupuk kandang, zeolit (6:2:1:1) dan diletakkan di dalam sungkup plastik tertutup selama enam minggu sebelum sungkup dibuka secara bertahap.

MICROPROPAGATION OF CHICKPEA FROM SHOOT TIP AND NODE SEGMENT

2018 ◽  
Vol 24 (2) ◽  
Author(s):  
J. D. BARSHILE
Keyword(s):  
Shoot Tip ◽  
Root Induction ◽  
Multiple Response ◽  
Ms Medium ◽  
Growth Responses ◽  
Rapid Multiplication ◽  
Micro Propagation ◽  
G 12 ◽  
Better Than

Present investigation was undertaken to standardize technique for in vitro micro-propagation of chickpea( Cicer arietinum ) cultivar Vishwas (Phule G 12). Micropropagation method for chickpea was established and this method enabled much more efficient propagation of plants. The present work was aimed at evolving a protocol for rapid multiplication of chickpea using micropropagation technique. Explants from shoot tip and node segment were cultured on MS medium supplemented with different concentrations of BAP and Kinetin (1.0 to 2.5 mg/l) and their growth responses like shooting were elucidated. The maximum multiple response was observed with 2 mg/l concentration of BAP from both types of explant. The highest number of shoots (12.5 ± 0.3) was achieved on MS medium with 2 mg/l BAP using node segments. The medium supplemented with 2 mg/l of BAP was found better than all other concentrations. Individual shoots were transferred to IBA and IAA (1.0-1.5 mg/l) for root induction. MS medium supplemented with 2 mg/l of IBA proved better for rooting. Rooted plantlets were successfully hardened in greenhouse and established in the pot.

scholarly journals CirBiTree: Citrullination Site Inference Based on a Fuzzy Neural Network and Flexible Neural Tree

2020 ◽  
Vol 2020 ◽  
pp. 1-8
Author(s):  
Chuandong Song ◽  
Haifeng Wang
Keyword(s):  
Neural Network ◽  
Fuzzy Neural Network ◽  
Classification Model ◽  
Peptide Sequence ◽  
Sequence Information ◽  
Post Translational Modification ◽  
Fuzzy Neural ◽  
Human Complex ◽  
Better Than

Emerging evidence demonstrates that post-translational modification plays an important role in several human complex diseases. Nevertheless, considering the inherent high cost and time consumption of classical and typical in vitro experiments, an increasing attention has been paid to the development of efficient and available computational tools to identify the potential modification sites in the level of protein. In this work, we propose a machine learning-based model called CirBiTree for identification the potential citrullination sites. More specifically, we initially utilize the biprofile Bayesian to extract peptide sequence information. Then, a flexible neural tree and fuzzy neural network are employed as the classification model. Finally, the most available length of identified peptides has been selected in this model. To evaluate the performance of the proposed methods, some state-of-the-art methods have been employed for comparison. The experimental results demonstrate that the proposed method is better than other methods. CirBiTree can achieve 83.07% in sn%, 80.50% in sp, 0.8201 in F1, and 0.6359 in MCC, respectively.

Sodium nitroprusside promotes multiplication and regeneration of Malus hupehensis in vitro plantlets

2008 ◽  
Vol 96 (1) ◽  
pp. 29-34 ◽  
Author(s):  
Xiaojiao Han ◽  
Hongqiang Yang ◽  
Kaixuan Duan ◽  
Xinrong Zhang ◽  
Haizhou Zhao ◽  
...  
Keyword(s):  
Sodium Nitroprusside ◽  
Malus Hupehensis ◽  
In Vitro Plantlets

scholarly journals Shoot Multiplication and Callus Induction of Labisia pumila var. alata as Influenced by Different Plant Growth Regulators Treatments and Its Polyphenolic Activities Compared with the Wild Plant

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3229
Author(s):  
Mat Yunus Najhah ◽  
Hawa Z. E. Jaafar ◽  
Jaafar Juju Nakasha ◽  
Mansor Hakiman
Keyword(s):  
Callus Induction ◽  
Antioxidant Activities ◽  
Shoot Multiplication ◽  
Wild Plants ◽  
Wild Plant ◽  
Total Phenolic ◽  
Nodal Segment ◽  
Ms Medium ◽  
In Vitro Plantlets

This study aims to investigate whether the in vitro-cultured L. pumila var. alata has higher antioxidant activity than its wild plant. An 8-week-old L. pumila var. alata nodal segment and leaf explants were cultured onto Murashige and Skoog (MS) medium supplemented with various cytokinins (zeatin, kinetin, and 6-benzylaminopurine (BAP)) for shoot multiplication and auxins (2,4-dichlorophenoxyacetic acid (2,4-D) and picloram) for callus induction, respectively. The results showed that 2 mg/L zeatin produced the optimal results for shoot and leaf development, and 0.5 mg/L 2,4-D produced the highest callus induction results (60%). After this, 0.5 mg/L 2,4-D was combined with 0.25 mg/L cytokinins and supplemented to the MS medium. The optimal results for callus induction (100%) with yellowish to greenish and compact texture were obtained using 0.5 mg/L 2,4-D combined with 0.25 mg/L zeatin. Leaves obtained from in vitro plantlets and wild plants as well as callus were extracted and analyzed for their antioxidant activities (DPPH and FRAP methods) and polyphenolic properties (total flavonoid and total phenolic content). When compared with leaf extracts of in vitro plantlets and wild plants of L. pumila var. alata, the callus extract displayed significantly higher antioxidant activities and total phenolic and flavonoid content. Hence, callus culture potentially can be adapted for antioxidant and polyphenolic production to satisfy pharmaceutical and nutraceutical needs while conserving wild L. pumila var. alata.

scholarly journals Natural killer T cell immunotherapy combined with oncolytic vesicular stomatitis virus or reovirus treatments differentially increases survival in mouse models of ovarian and breast cancer metastasis

2021 ◽  
Vol 9 (3) ◽  
pp. e002096
Author(s):  
Simon Gebremeskel ◽  
Adam Nelson ◽  
Brynn Walker ◽  
Tora Oliphant ◽  
Lynnea Lobert ◽  
...  
Keyword(s):  
Breast Cancer ◽  
Vesicular Stomatitis Virus ◽  
Cell Activation ◽  
Tumor Burden ◽  
Oncolytic Viruses ◽  
Nkt Cell ◽  
Cell Immunotherapy ◽  
Vesicular Stomatitis ◽  
Better Than

BackgroundOncolytic viruses reduce tumor burden in animal models and have generated promising results in clinical trials. However, it is likely that oncolytic viruses will be more effective when used in combination with other therapies. Current therapeutic approaches, including chemotherapeutics, come with dose-limiting toxicities. Another option is to combine oncolytic viruses with immunotherapeutic approaches.MethodsUsing experimental models of metastatic 4T1 breast cancer and ID8 ovarian peritoneal carcinomatosis, we examined natural killer T (NKT) cell-based immunotherapy in combination with recombinant oncolytic vesicular stomatitis virus (VSV) or reovirus. 4T1 mammary carcinoma cells or ID8 ovarian cancer cells were injected into syngeneic mice. Tumor-bearing mice were treated with VSV or reovirus followed by activation of NKT cells via the intravenous administration of autologous dendritic cells loaded with the glycolipid antigen α-galactosylceramide. The effects of VSV and reovirus on immunogenic cell death (ICD), cell viability and immunogenicity were tested in vitro.ResultsVSV or reovirus treatments followed by NKT cell activation mediated greater survival in the ID8 model than individual therapies. The regimen was less effective when the treatment order was reversed, delivering virus treatments after NKT cell activation. In the 4T1 model, VSV combined with NKT cell activation increased overall survival and decreased metastatic burden better than individual treatments. In contrast, reovirus was not effective on its own or in combination with NKT cell activation. In vitro, VSV killed a panel of tumor lines better than reovirus. VSV infection also elicited greater increases in mRNA transcripts for proinflammatory cytokines, chemokines, and antigen presentation machinery compared with reovirus. Oncolytic VSV also induced the key hallmarks of ICD (calreticulin mobilization, plus release of ATP and HMGB1), while reovirus only mobilized calreticulin.ConclusionTaken together, these results demonstrate that oncolytic VSV and NKT cell immunotherapy can be effectively combined to decrease tumor burden in models of metastatic breast and ovarian cancers. Oncolytic VSV and reovirus induced differential responses in our models which may relate to differences in virus activity or tumor susceptibility.

Factor-VIII Inhibitor in Less Severely Affected Haemophilic Patients

1975 ◽  
Author(s):  
E. G. D. Tuddenham ◽  
A. L. Bloom ◽  
J. C. Giddings ◽  
C. A. Barrett
Keyword(s):  
Factor Viii ◽  
Factor Viii Inhibitor ◽  
Factor Viii Level ◽  
Replacement Treatment ◽  
Viii Level ◽  
Viii Inhibitor ◽  
In Vivo Recovery ◽  
Better Than

The occurrence of factor VIII inhibitor in five mild or moderately affected liaemophilic patients is described. In four patients the inhibitor inactivated endogenous factor VIII an dtemporarily converted them to severely affected haemophiliacs with factor VIII level of 0%. In the fifth patient, a brother of one of the others, the inhibitor although more potent did not inactivate the patient’s own factor VIII and did not completely inactivate normal factor VIII in vitro. This patient responded to treatment with factor-VIII concentrate but the in-vivo recovery was reduced. The patient’s plasma was tested against a panel of normal donors but it inactivated factor VIII in each to a similar extent and no evidence for normal factor-VIII groups was obtained. In the other patients the response to replacement treatment was also better than that usually seen in severely affected haemophilic patients with inhibitor. In the two related patients the inhibitors have so far persisted but in the unrelated patients the inhibitors eventually disappeared and did not always recur with subsequent therapy. The incidence of factor- VIII inhibitor in less severe haemophiliacs (factor VIII > 3% ) in this centre is 6% suggesting that the complication is more frequent in this type of patient than hitherto recognised.

scholarly journals In vitro and in vivo Evaluation of Ibuprofen Nanosuspensions for Enhanced Oral Bioavailability

2021 ◽  
Author(s):  
Mohsen Hedaya ◽  
Farzana Bandarkar ◽  
Aly Nada
Keyword(s):  
Particle Size ◽  
Tween 80 ◽  
Aqueous Solubility ◽  
In Vitro Dissolution ◽  
In Vivo Evaluation ◽  
Poorly Soluble ◽  
Extent Of Absorption ◽  
Better Than

Introduction: The objectives were to prepare, characterize and in vivo evaluate different ibuprofen (IBU) nanosuspensions prepared by ultra-homogenization, after oral administration to rabbits. Methods: The nanosuspensions produced by ultra-homogenization were tested and compared with a marketed IBU suspension for particle size, in vitro dissolution and in vivo absorption. Five groups of rabbits received orally 25 mg/kg of IBU nanosuspension, nanoparticles, unhomogenized suspension, marketed product and untreated suspension. A sixth group received 5 mg/kg IBU intravenously. Serial blood samples were obtained after IBU administration. Results: The formulated nanosuspensions showed significant decrease in particle size. Polyvinyl Pyrrolidone K30 (PP) was found to improve IBU aqueous solubility much better than the other tested polymers. Addition of Tween 80 (TW), in equal amount as PP (IBU: PP:TW, 1:2:2 w/w) resulted in much smaller particle size and better dissolution rate. The Cmax achieved were 14.8±1.64, 11.1±1.37, 9.01±0.761, 7.03±1.38 and 3.23±1.03 μg/ml and the tmax were 36±8.2, 39±8.2, 100±17.3, 112±15 and 105±17 min for the nanosuspension, nanoparticle, unhomogenized suspension, marketed IBU suspension and untreated IBU suspension in water, respectively. Bioavailability of the different formulations relative to the marketed suspension were the highest for nanosuspension> unhomogenized suspension> nanoparticles> untreated IBU suspension. Conclusion: IBU/PP/TW nanosuspensions showed enhanced in vitro dissolution as well as faster rate and higher extent of absorption as indicated from the higher Cmax, shorter tmax and larger AUC. The in vivo data supported the in vitro results. Nanosuspensions prepared by ultra-high-pressure-homogenization technique can be used as a good formulation strategy to enhance the rate and extent of absorption of poorly soluble drugs.

Sign in / Sign up

Export Citation Format

Share Document