scholarly journals Sustainable-Eco-Buildings Assessment Method SEBAM for Evaluation of Residential Areas in Hot-Dry Climate

2021 ◽  
Vol 14 (3) ◽  
pp. 1
Author(s):  
Hind Abdelmoneim Khogali

This research aimed to investigate the present situation regarding residential neighbourhood in hot-dry climates. The area of study comprised four urban classes in Greater Khartoum. The problems of residential buildings were examined, aiming to find a sustainable assessment method for evaluating residential areas and their services The methodology of the research began with a literature review for identifying passive and sustainable solutions suitable to hot-dry climates. This method employed eight main categories: sustainable sites, indoor environmental quality, outdoor thermal control, building forms, materials and resources, water supply, power supply systems, and environmental plan processes and CO2 emisions. In addition, a points scale was used, based on ratings of ‘Excellent’, ‘V. Good’, ‘Good’, and ‘Pass’, with a total of 125 points to determine the evaluation result for a building. The study evaluated an urban sample in the Al Taief neighbourhood. A survey was initiated by identifying the standards for selecting the case study, the survey studied 48 cases in the residential areas, analysed the collected data, and then summarised it into tables and figures. The results presented indicated that 19% were Good, 25% were Pass, and 56% were considered ‘weak’. The conclusions and recommendations regarding urban housing services can be applied to sustainable ecological neighbourhoods.

2013 ◽  
Vol 4 (4) ◽  
pp. 145-154
Author(s):  
Saulius Raslanas ◽  
Jurgita Alchimovienė

The majority of Lithuanian multi-apartment residential buildings were built before 1993. Moreover, projects of housing renovation and maintenance have not been carried out before 1996. Lack of proper maintenance led to a significant deterioration of multi-apartment buildings. Most of these buildings are neither economic, nor environmentally-friendly and consume a significant amount of heat energy. Six major construction requirements should be satisfied when designing or refurbishing a building. Sustainable renovation of multi-apartment buildings and their environment is a universally recognized problem. It is crucial to evaluate both the buildings and their surrounding environment. A proper building renovation project can be created and selected only by performing multi-criteria assessment. Therefore, this paper presents a sustainable multi-apartment building assessment method, which is applied specifically for Lithuania and could help renovate multi-apartment buildings in residential areas of Lithuanian cities more effectively. After performing the analysis of modern building sustainability assessment methods, the BREEAM method was chosen as the basis for the proposed method, specifically adapted to Lithuania. It is one of the oldest and most widely used methods used for assessment of the environmental effect of buildings. This method allows evaluating the building's utility from the ecological perspective in the following areas: management, health and wellbeing, energy, transport, water, materials, waste, land use and ecology, pollution and innovation. However, BREEAM and other similar methods cannot be used to assess the financial aspects of a building, which should be included in the analysis at all assessment stages along with the aspects of environment protection. When creating a renovation project, an important criterion is the payoff of it; therefore, the absence of financial assessment diminishes the effectiveness of the BREEAM assessment method. To address this problem, the proposed method is complemented with an additional set of economic assessment criteria. Furthermore, the BREEAM method is modified, taking into account the conditions in Lithuania and determining new significances of the criteria sets. By applying this method, specifically adapted to Lithuania, the assessment of a renovation project of a standard 47-year-old multi-apartment building was made. The assessment score was 71.77%, therefore, the renovated building satisfied the sustainability requirements and was given an “Excellent” sustainability status. The application of the assessment method adapted to Lithuania could help renovate multi-apartment buildings in residential areas of Lithuanian cities more effectively. This, in turn, could result in a higher quality of life, since the consumption of natural resources and CO2 emission would decrease. Renewable energy sources would become more widespread and, therefore, the climatic changes would occur less often. Santrauka Didžioji dalis Lietuvos daugiabučių gyvenamųjų namų pastatyti iki 1993 m. Jie dėl nepakankamos priežiūros dabartiniu metu yra smarkiai nusidėvėję. Dauguma jų neekonomiški, neekologiški, suvartoja daug šilumos energijos, tokius daugiabučius reikia modernizuoti. Projektuojant ar atnaujinant pastatą turi būti laikomasi šešių esminių statinio reikalavimų. Todėl norint nustatyti pastatų atnaujinimo efektyvumą, reikia atlikti išsamų ir visapusišką vertinimą. Šiame straipsnyje siūlomas Lietuvos daugiabučių atnaujinimo darnumo vertinimo metodas, grindžiamas darnių pastatų vertinimo metodu BREEAM. Šis metodas padėtų efektyviau vykdyti daugiabučių namų miestų gyvenamuosiuose rajonuose atnaujinimą, pirmiausia pagerinant pačių pastatų būklę ir jų aplinką, taip pat gyvenimo kokybę, sumažinant gamtinių išteklių naudojimo mastą, CO2 emisiją ir socialinę atskirtį, padidinant atsinaujinančiųjų energijos šaltinių vartojimą bei stabdant klimato kaitą.


Author(s):  
Sirous F. Yasseri ◽  
Jake Prager

This paper describes a recurrence law for explosions. The proposed recurrence law fits quite well to the historic explosion data in residential buildings as well as to the data on offshore installations in the North Sea. Generally quantified explosion risk assessment is performed for offshore installations, since it is believed historic data does not correspond to a specific installation and it may not be appropriate for use in performance based explosion engineering, which may in itself require realistic load description of explosion recurrence. The goodness-of-fit of the model for explosion occurrence data obtained using the quantified risk assessment method is also discussed. The paper then introduces the concept of performance-based design, which is an attempt to design structures with predictable performance under explosion loading. Performance objectives such as life safety, collapse prevention, or immediate resumption of operation are used to define the state of an installation following a design explosion. The recurrence law is then used to associate a level of explosion load to each limit state using a desirable level of probability of exceedance during the installations life time.


2015 ◽  
Vol 16 (6) ◽  
pp. 579-589 ◽  
Author(s):  
Tsubasa Shimoji ◽  
Hayato Tahara ◽  
Hidehito Matayoshi ◽  
Atsushi Yona ◽  
Tomonobu Senjyu

Abstract From the perspective of global warming suppression and the depletion of energy resources, renewable energies, such as the solar collector (SC) and photovoltaic generation (PV), have been gaining attention in worldwide. Houses or buildings with PV and heat pumps (HPs) are recently being used in residential areas widely due to the time of use (TOU) electricity pricing scheme which is essentially inexpensive during middle-night and expensive during day-time. If fixed batteries and electric vehicles (EVs) can be introduced in the premises, the electricity cost would be even more reduced. While, if the occupants arbitrarily use these controllable loads respectively, power demand in residential buildings may fluctuate in the future. Thus, an optimal operation of controllable loads such as HPs, batteries and EV should be scheduled in the buildings in order to prevent power flow from fluctuating rapidly. This paper proposes an optimal scheduling method of controllable loads, and the purpose is not only the minimization of electricity cost for the consumers, but also suppression of fluctuation of power flow on the power supply side. Furthermore, a novel electricity pricing scheme is also suggested in this paper.


2018 ◽  
Vol 878 ◽  
pp. 202-209 ◽  
Author(s):  
Feng Qian ◽  
Li Yang

The natural ventilation of residential areas has placed more and more emphasis on residential area planning, according to the relationship between natural ventilation environments and the layout of architecture, we can reduce the energy consumption and the adverse effect of wind outdoors, improve the living environment and quality of life, making harmony between human and the nature. In this paper, we use Air-Pak to simulate the wind environment of residential areas. Through analyzing and simulating the air field which forms when the wind blows around the residential buildings by Air-Pak, we explain the advantage of the combination of computer simulation software and residential area planning. And we give some advice to the layout of the outdoor environment early in the residential planning area by the simulation of outdoor environments of buildings.


2013 ◽  
Vol 1 (4) ◽  
pp. 3485-3527 ◽  
Author(s):  
H. Cammerer ◽  
A. H. Thieken ◽  
J. Lammel

Abstract. Flood loss modeling is an important component within flood risk assessments. Traditionally, stage-damage functions are used for the estimation of direct monetary damage to buildings. Although it is known that such functions are governed by large uncertainties, they are commonly applied – even in different geographical regions – without further validation, mainly due to the lack of data. Until now, little research has been done to investigate the applicability and transferability of such damage models to other regions. In this study, the last severe flood event in the Austrian Lech Valley in 2005 was simulated to test the performance of various damage functions for the residential sector. In addition to common stage-damage curves, new functions were derived from empirical flood loss data collected in the aftermath of recent flood events in the neighboring Germany. Furthermore, a multi-parameter flood loss model for the residential sector was adapted to the study area and also evaluated by official damage data. The analysis reveals that flood loss functions derived from related and homogenous regions perform considerably better than those from more heterogeneous datasets. To illustrate the effect of model choice on the resulting uncertainty of damage estimates, the current flood risk for residential areas was assessed. In case of extreme events like the 300 yr flood, for example, the range of losses to residential buildings between the highest and the lowest estimates amounts to a factor of 18, in contrast to properly validated models with a factor of 2.3. Even if the risk analysis is only performed for residential areas, more attention should be paid to flood loss assessments in future. To increase the reliability of damage modeling, more loss data for model development and validation are needed.


2021 ◽  
Author(s):  
Janani Bharatraj

Fuzzy sets have been extensively researched and results have been developed based on the extensions of fuzzy sets. In this chapter, fuzzy sets and its extensions are discussed. Z-numbers along with weighted sum product assessment method is used to obtain a feasible solution to the location selection problem for installation of smog towers in a densely populated locality. The degrees of freedom namely degree of membership, degree of non-membership and the degree of hesitancy have been expressed as Zadeh’s Z-number with probability quotient for the degrees. Further, ranking of the alternatives based on Z-numbers and WASPAS to allocate smog towers to residential areas stricken by air pollution.


2018 ◽  
Vol 1 (2) ◽  
pp. 112
Author(s):  
Amat Rahmat ◽  
Eddy Prianto ◽  
Setia Budi Sasongko

Abstract: This research study discusses the phenomenon of fires that occur in several major cities in Indonesia in residential buildings in dense residential areas. In the case of this fire will be evaluated a variety of data on the cause of fire due to short circuit from electricity and record photos of objects typology of the form of residential roofs that burned around the location of the results of reports and documentation of publications media sources both newspapers and online media. Examples of cases of fire that were evaluated and discussed were taken from 2015 and 2018. Keyword: Roof Forms, Causes of Electricity, Homes Abstrak: Studi penelitian ini membahas tentang fenomena kebakaran yang terjadi di beberapa kota besar di Indonesia pada bangunan rumah tinggal yang ada di kawasan pemukiman padat. Pada kasus kebakaran ini akan dievaluasi berbagai data penyebab timbulnya api akibat hubungan arus pendek dari listrik dan merekam foto objek tipologi bentuk atap rumah tinggal yang terbakar di sekitar lokasi hasil dari laporan serta dokumentasi sumber media publikasi baik koran maupun media online. Contoh kasus kejadian kebakaran yang dievaluasi dan menjadi pembahasan diambil dari tahun 2015 sampai dengan bulan Juli 2018.    Kata Kunci: Bentuk Atap, Penyebab Listrik, Rumah Tinggal


2019 ◽  
Vol 11 (21) ◽  
pp. 5876
Author(s):  
Woongkyoo Bae ◽  
UnHyo Kim ◽  
Jeongwoo Lee

Since the 1970s, the South Korean government has been redeveloping blighted residential environments and adopting large-scale redevelopment policies to solve urban housing-related problems. However, it is difficult to designate areas for redevelopment and identify areas where redevelopment is currently unfeasible. This study establishes a framework to support decision-making in a selection of housing renewal districts. The proposed Residential Environment Maintenance Index (REMI) overcomes the limitations of existing indicators, which are often biased toward physical requirements. Using this, we rationalize the designation of maintenance areas by considering both physical and social requirements and outline the renewal district designation procedure. To derive REMI, we used an analytic hierarchy process analysis and estimated the index’s reliability by clarifying the relative importance and priority of the indicators based on surveys of 300 subject matter experts. We analyzed various simulations by applying REMI at sites where maintenance is currently planned or discharged in Seoul. These reveal that the total number of urban renewal projects can be adjusted by adjusting the number of renewal district designations through the proposed REMI according to the economic situation. The results have implications for understanding REMI’s possible application and flexible management at the administrative level to pursue long-term sustainable development.


2009 ◽  
Vol 10 (4) ◽  
pp. 687-728
Author(s):  
Richard Harris

The idea, and to a lesser extent the reality, of themodern home improvement store was born in the first quarter of the twentieth century. After 1905 the manufacturers of mail-order kit houses soon grew to threaten the local monopoly of retail building suppliers. Themost important of these suppliers were the lumber merchants who provided most of the materials and credit used by building contractors. At first dealers responded by mounting boycotts and by supporting trade-at-home campaigns, but these were successfully challenged in court. A survey of trade journals shows that after 1914 dealers began to act more constructively. Encouraged by the trade press, and helped by state and national associations, by the 1920s they were advertising more effectively and offering a widening range of goods and services to consumers, including house plans. Because many new customers were women, dealers had to hire more courteous staff, clean up their yards, mount better displays, build showrooms and, in time, relocate to more salubrious and heavily-trafficked parts of town. The emergence of the home improvement store is a significant chapter in the history of urban housing, and especially the marketing of housing services, in the twentieth century.


2018 ◽  
Vol 28 (4) ◽  
pp. 470-478 ◽  
Author(s):  
Kwok Wai Mui ◽  
Tsz Wun Tsang ◽  
Ling Tim Wong ◽  
Yuen Ping William Yu

This study investigates the indoor environmental quality (IEQ) responses from occupants living in very small residential units that are unique to Hong Kong. Through the changes in environmental parameters, including thermal, indoor air quality, visual and aural, the study demonstrates that the overall IEQ acceptance in these units is different from the one in general residential building environments. Results show that occupants of these units are more sensitive to warmth and operative temperature change as compared to occupants of general residential buildings. A small variation of thermal acceptance suggests that the small unit occupants have already developed certain degree of tolerance to hot conditions. The adaptation to the reality of a hot environment is also reflected in the overall IEQ acceptance. It is believed that very small space residents have developed tolerance and adaptation to an unchangeable reality, changing environmental conditions does not necessarily alter their acceptance of individual IEQ aspects and overall IEQ.


Sign in / Sign up

Export Citation Format

Share Document