A Comparative Analysis on Life Cycle CO2Emission between a Modular Housing and a R.C. Apartment Housing

Author(s):  
Ji-Yeon Park ◽  
Sung-Hee Kim ◽  
Chang-U Chae
2018 ◽  
Vol 14 (1) ◽  
pp. 10-24
Author(s):  
V. N. Fursov ◽  
L. S. Cherney

Darkling beetle Zophobas atratus (Coleoptera, Tenebrionidae) is recorded here for the first time as a new species for the fauna of Ukraine. Detailed study on morphology of preimaginal stages and biology of this species recently introduced to Ukraine, is given here. Zophobas atratus is an important species being easily reared in laboratory cultures and widely distributed in North and South America, Europe, and Asia. Detailed descriptions of all life stages, including egg, young and older larvae, pupa and adult of Z. atratus are required for further taxonomical study of the genus Zophobas, which isn’t yet definitively established. New identification keys for adults and larvae of the genera of tribe Tenebrionini are presented here, based on a comparative analysis of the taxonomic characters of adults and larvae of Z. atratus and species from the genera Tenebrio and Neatus. Comparative analysis of morphology of larva of Z. atratus and larvae of the tribe Cteniopodini of close subfamily Alleculinae was conducted here. The subfamily Alleculinae previously had the rank of family Alleculidae, but our analysis confirmed the reliability of its current taxonomic position as subfamily. The study of morphology of larvae of 1st and 2nd instars of Z. atratus revealed that they are characterized by special taxonomic structures that are not characteristic for oldest instars of larvae of Z. atratus. These characters include absence of spines on caudal segment, presence of a set of 4 setae at posterior margin of tergites of prothorax, metathorax, and 1st to 8th abdominal segments, strongly convex 2nd antennal segment and sensory zone in the form of an open ring on its apex, and etc. Moreover, structure of antenna of larvae of Z. atratus is similar to that of oldest larvae of most species of darkling beetles of the fauna of Ukraine. The most distinctive features of Z. atratus are: sexual dimorphism in structure of clypeus of adults; filiform sclerotized antenna of larva with a continuous sensory zone at apex of 2nd segment, weakly developed 3rd segment; fusion of sclerotized pleurites of 1st–8th abdominal segments with their tergites; sexual dimorphism in structure of 9th abdominal segment of pupa, and presence of two hooks on apex of its appendages. The data of original study of features of life cycle of Z. atratus are given. The pictures and photos of details of morphology of egg, larvae, pupa and adult of Z. atratus are presented. It was recored that life cycle of Z. atratus from laying of egg to the emergence of adult continues from 169 up to 181 days. Adults lived maximum up to 206 days. Maturation of eggs in female after copulation continues 10-11 days. Stage of egg continues 7 days, larva – up to 151 days, including pre-pupal period from 6 to 22 days, pupa – from 8 to 21 days. Twelve larval stages of Z. atratus were recorded in laboratory culture.


Geosciences ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 313
Author(s):  
Shinya Inazumi ◽  
Sudip Shakya ◽  
Takahiro Komaki ◽  
Yasuharu Nakanishi

This study focused on the middle-pressure jet grouting method, which has a complicated development mechanism for the columnar soil-improved body, with the aim of establishing a computer-aided engineering (CAE) system that can simulate the performance on a computer. Furthermore, in order to confirm the effect of middle-pressure jet grouting with mechanical agitation and mixing, a comparative analysis was performed with different jet pressures, the development situation was visualized, and the performance of this method was evaluated. The results of MPS-CAE as one of the CAE systems showed that the cement slurry jet ratio in the planned improvement range, including the periphery of the mixing blade, by the middle-pressure jet grouting together with the mechanical agitation and mixing was increased and a high quality columnar soil-improved body was obtained. It is expected that the introduction of CAE will contribute to the visualization of the ground, and that CAE will be an effective tool for the visual management of construction for ground improvement and the maintenance of improved grounds during the life cycle of the ground-improvement method.


2021 ◽  
Vol 28 (1) ◽  
Author(s):  
M.A. Adeagbo ◽  
J.E.T. Akinsola ◽  
A.A. Awoseyi ◽  
F. Kasali

Selection of a suitable Software Development Life Cycle (SDLC) model for project implementation is somewhat confusing as there are a lot of SDLC models with similar strengths and weaknesses. Also, the solutions proffered among the researchers so far have been the  qualitative comparative analysis of SDLC models. Hence, this paper proposes a comparative analysis of SDLC models using quantitative approach in relation to strengths and weaknesses of SDLC models. The study adapted comparative analysis and Software Development Life Cycle (SDLC) models features’ classification using ten characteristics such as project complexity, project size, project duration, project with risk, implementation/initial cost, error discovery, associated cost, risk analysis, maintenance and cost estimation. A quantitative measure that employs online survey using experts in software design and engineering, project management and system analysis was carried out for the evaluation of SDLC models. Purposeful Stratified Random Sampling (SRS) technique was used to gather the data for analysis using XLSTAT after pre-processing, taking into consideration both benefit and cost criteria. The overall performance evaluation showed that Spiral-Model is the best followed by V-Model and lastly Waterfall Model with comparative values of 38.63%, 35.76% and 25.61% respectively. As regards cost estimation, Waterfall Model is the most efficient with value of 41%, then V-Model with 31% and lastly Spiral Model with 28%. V-Model has great error recovery capability with value of 45% which is closely followed by Spiral Model with 37% and lastly Waterfall Model with 18%. The study revealed that, a model with efficient risk assurance does not guarantee efficient cost management. In the future work, more characteristics regarding SDLC models shall be considered.


Energies ◽  
2018 ◽  
Vol 12 (1) ◽  
pp. 6 ◽  
Author(s):  
Anca N. Iuga (Butnariu) ◽  
Vasile N. Popa ◽  
Luminița I. Popa

This article utilized a multicriterial quantitative and qualitative analysis of the influence of eco-friendly methods in reducing emissions over the life cycle of automotive products. The new proposed multicriterial method is applicable where preferential criteria are independent of each other, and where uncertainty has not been incorporated into a formal model. The linear model showed how the values of several criteria related to the options could be combined into an overall value. The main objective of this research was to apply a multicriterial methodology to improve the accuracy of existing approaches in identifying the influence of eco-friendly methods to reduce emissions over the product life cycle, and to assist decision makers in the manufacturing process. The research questions were as follows: Which one of two automotive products (“Bus” or “Truck”) has the best environmental performance (EPP)? Which one of two automotive products (“Bus” or “Truck”) has the best overall environmental performance (EPAPL)? This research provided a detailed comparative analysis of a “Crosstown bus” and a “Tractor truck”, both made at the Industrial Park Romania Brasov, Romania, using a multicriterial analysis. This article provided an answer to the first research question, whilst only presenting the results for the second question. The results of the proposed multicriterial method applications provide a decision support base for environmental managerial decisions in the field of automotive production processes.


Sign in / Sign up

Export Citation Format

Share Document