scholarly journals The Energy as a Determinant Factor in the Ethiopathogeny of Chromosomal Abnormalities. The Unsuspected Bioenergetic Role of Melanin

2020 ◽  
Author(s):  
Arturo Solis Herrera
Keyword(s):  
Energy Source ◽  
Cell Nucleus ◽  
Chromosomal Abnormalities ◽  
Energy Levels ◽  
Chromosomal Anomalies ◽  
Biochemical Processes ◽  
Carbon Chains ◽  
Sick Patient ◽  
Determinant Factor

In the study of chromosomal abnormalities, in genetics, and in medicine in general, attention is rarely paid to the role of energy in the healthy subject and in the sick patient. The research on the chromosomal anomalies that are constantly published, does not mention the energy necessary for the biochemical processes involved in the function, replication and formation of genes, to be carried out in an adequate way. It seems that it is assumed that energy levels are always fine or at least did not have a significant role in the conditions associated with what we call chromosomal anomalies. A characteristic of the cell nucleus that has gone unnoticed is that it contains neither mitochondria nor ATP, much less glucose. Perhaps because of this, some researchers and clinicians come to think that the nucleus of cells does not require energy. The purpose of this work is to draw attention to the importance of energy levels in all the metabolic processes of the cell; and to make known that glucose is not an energy source, as it is only a source of carbon chains; and finally remark that our body, through melanin, can take energy directly from light.

scholarly journals Prevalence of Chromosomal Abnormalities in Infertile Couples in Romania

2015 ◽  
Vol 18 (1) ◽  
pp. 23-30 ◽  
Author(s):  
Dana Mierla ◽  
M. Malageanu ◽  
R. Tulin ◽  
D. Albu
Keyword(s):  
Retrospective Study ◽  
Chromosomal Abnormalities ◽  
Normal Karyotype ◽  
Control Group ◽  
Chromosomal Anomalies ◽  
Exact Test ◽  
Infertile Women ◽  
Infertile Men ◽  
Significant Statistical Association

AbstractThe purpose of this study was to establish a correlation between the presence of chromosomal abnormalities in one of the partners and infertility. This retrospective study was performed at the Department of Reproductive Medicine, Life Memorial Hospital, Bucharest, Romania, between August 2007 to December 2011. Two thousand, one hundred and ninety-five patients with reproductive problems were investigated, and the frequency of chromosomal abnormalities was calculated. The control group consisting of 87 fertile persons who had two or more children, was investigated in this retrospective study. All the patients of this study were investigated by cytogenetic techniques and the results of the two groups were compared by a two-tailed Fisher’s exact test. In this study, 94.99% patients had a normal karyotype and 5.01% had chromosomal abnormalities (numerical and structural chromosomal abnormalities). In the study group, numerical chromosomal abnormalities were detected in 1.14% of infertile men and 0.62% of infertile women, and structural chromosomal abnormalities were detected in 1.38% of infertile men and 1.87% of infertile women, respectively. The correlation between the incidence of chromosomal anomalies in the two sexes in couple with reproductive problems was not statistically significant. Recently, a possible association between infertility and chromosomal abnormalities with a significant statistical association has been reported. Our study shows that there is no association between chromosomal abnormalities and infertility, but this study needs to be confirmed with further investigations and a larger control group to establish the role of chromosomal abnormalities in the etiology of infertility.

The Role of Research and Innovation in the Transformation of Agri-Food Systems

2018 ◽  
Vol 12 (2) ◽  
pp. 60-63
Author(s):  
Mariana Sandu ◽  
Stefan Mantea
Keyword(s):  
Technological Progress ◽  
Food Systems ◽  
Food System ◽  
Agricultural Research ◽  
Research And Innovation ◽  
And Performance ◽  
The Impact ◽  
Determinant Factor ◽  
Rapid Transformation

Abstract Agri-food systems include branching ramifications, which connect in the upstream the input suppliers with farmers, and downstream farmers, processors, retailers and consumers. In the last decades, at the level of the regions, food systems have undergone rapid transformation as a result of technological progress. The paper analyzes the changes made to the structure, behavior and performance of the agri-food system and the impact on farmers and consumers. Also, the role of agricultural research as a determinant factor of transformation of agri-food system is analyzed. The research objective is to develop technologies that cover the entire food chain (from farm to fork) and meet the specific requirements of consumers (from fork to farm) through scientific solutions in line with the principles of sustainable agriculture and ensuring the safety and food safety of the population.

Microbial Biofilms and Biotechnology – Some Perceptions

2020 ◽  
Vol 09 ◽  
Author(s):  
Subba Rao Toleti
Keyword(s):  
Tissue Culture ◽  
Synthetic Biology ◽  
Industrial Effluents ◽  
Aquatic Environments ◽  
Biochemical Processes ◽  
Microbial Biofilms ◽  
Biofilm Bacteria ◽  
Prophylactic Vaccines ◽  
Design Construction

: The review is an attempt to introduce the readers in brief about biofilms and their implications as well as some new perceptions in biotechnology. Biofilms are adherent microbial communities, which are developed on submerged surfaces in aquatic environments. Biofilms play a significant role in exopolymer production, material deterioration and also cause harmful infections. Further, the role of corrosion causing biofilm bacteria in deterioration of different materials, microbial biofilms and their enzymatic processes in reducing the toxicity of pollutants in industrial effluents are elaborated, along with clean technologies for wastewater treatment. Biotechnology is defined as any technological application that uses biological systems to synthesize or modify products or processes. The applications include biochemical processes, medical care, cell and tissue culture as well as synthetic biology and others. Synthetic biology details about the design, construction of new biological components and systems for useful purposes. Finally, to overcome the limitations that are inherent to the use of cellular host’s, cell-free systems as critical platforms for synthetic biology applications. This mini-review also mentions about new diagnostic products based on enzymes, monoclonal antibodies and engineered proteins as well as novel prophylactic vaccines.

scholarly journals A New Piano-Stool Ruthenium(II) P-Cymene-Based Complex: Crystallographic, Hirshfeld Surface, DFT, and Luminescent Studies

Crystals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 13
Author(s):  
Mohd. Muddassir ◽  
Abdullah Alarifi ◽  
Mohd. Afzal
Keyword(s):  
Density Functional ◽  
Weak Interactions ◽  
Energy Levels ◽  
Hirshfeld Surface ◽  
Binding Energies ◽  
Orbital Energy ◽  
Aminosalicylic Acid ◽  
Full Characterization

A new complex (Ru(η6-p-cymene)(5-ASA)Cl2) (1) where 5-ASA is 5-aminosalicylic acid has been prepared by reacting the ruthenium arene precursors ((η6-arene)Ru(μ-Cl)Cl)2, with the 5-ASA ligands in a 1:1 ratio. Full characterization of complex 1 was accomplished by elemental analysis, IR, and TGA following the structure obtained from a single-crystal X-ray pattern. The structural analysis revealed that complex 1 shows a “piano-stool” geometry with Ru-C (2.160(5)- 2.208(5)Å), Ru-N (2.159(4) Å) distances, which is similar to equivalents sister complex. Density functional theory (DFT) was used to calculate the significant molecular orbital energy levels, binding energies, bond angles, bond lengths, and spectral data (FTIR, NMR, and UV–VIS) of complex 1, consistent with the experimental results. The IR and UV–VIS spectra of complex 1 were computed using all of the methods and choose the most appropriate way to discuss. Hirshfeld surface analysis was also executed to understand the role of weak interactions such as H⋯H, C⋯H, C-H⋯π, and vdW interactions, which play a significant role in the crystal environment’s stability. Moreover, the luminescence results at room temperature show that complex 1 gives a more intense emission band positioned at 465 nm upon excitation at 330 nm makes it a suitable candidate for the building of photoluminescent material.

scholarly journals The role of L/W in the solar radiation for Saharian cities

2019 ◽  
Vol 91 ◽  
pp. 05006
Author(s):  
Rami Qaoud ◽  
Alkama Djamal
Keyword(s):  
Solar Radiation ◽  
Solar Energy ◽  
Energy Levels ◽  
Direct Solar Radiation ◽  
Test Field ◽  
Natural Lighting ◽  
The Difference ◽  
The Impact ◽  
The Relationship

The urban fabric of the desert cities is based on the principle of reducing the impact of urban canyons on direct solar radiation. Here comes this research, which is based on a comparative study of the periods of direct solarisation and values of the solar energy of urban canyons via two urban fabrics that have different building densities, where the ratio between L/W is different. In order to obtain the real values of the solar energy (thermal, lighting), the test field was examined every two hours, each three consecutive days. The measurement stations are positioned by the three types of the relationship between L/W, (L≥2w, L=w, L≤0.5w). According to the results, we noticed and recorded the difference in the periods of direct solarization between the types of urban engineering canyons, reaching 6 hours a day, the difference in thermal values of air, reaching 4 °C, and the difference in periods of direct natural lighting, reaching 6 hours. It should be noted that the role of the relationship between L/W is to protect the urban canyons by reducing the impact of direct solar radiation on urban canyons, providing longer hours of shading, and reducing solar energy levels (thermal, lighting) at the urban canyons. This research is classified under the research axis (the studies of external spaces in the urban environment according to the bioclimatic approach and geographic approach). But this research aims to focus on the tracking and studying the distribution of the solar radiation - thermal radiation and lighting radiation - in different types of street canyons by comparing the study of the direct solarization periods of each type and the quantity of solar energy collected during the solarization periods.

The role of biomass as a cleaner energy source in Egypt’s energy mix

2018 ◽  
Vol 172 ◽  
pp. 3918-3930 ◽  
Author(s):  
Ahmed Osama Abdulrahman ◽  
Donald Huisingh
Keyword(s):  
Energy Source ◽  
Energy Mix

Facile preparation of g-C3N4 modified BiOCl hybrid photocatalyst and vital role of frontier orbital energy levels of model compounds in photoactivity enhancement

2014 ◽  
Vol 416 ◽  
pp. 212-219 ◽  
Author(s):  
Shan Shi ◽  
M.A. Gondal ◽  
A.A. Al-Saadi ◽  
Radek Fajgar ◽  
Jaroslav Kupcik ◽  
...  
Keyword(s):  
Energy Levels ◽  
Vital Role ◽  
Orbital Energy ◽  
Frontier Orbital ◽  
Model Compounds ◽  
Facile Preparation ◽  
Frontier Orbital Energy ◽  
Hybrid Photocatalyst

Molecular modulation of calcium oxalate crystallization

2006 ◽  
Vol 291 (6) ◽  
pp. F1123-F1132 ◽  
Author(s):  
James J. De Yoreo ◽  
S. Roger Qiu ◽  
John R. Hoyer
Keyword(s):  
Molecular Modeling ◽  
Calcium Oxalate ◽  
Stone Formation ◽  
Energy Levels ◽  
Critical Role ◽  
Specific Interactions ◽  
Crystal Surfaces ◽  
Site Specific

Calcium oxalate monohydrate (COM) is the primary constituent of the majority of renal stones. Osteopontin (OPN), an aspartic acid-rich urinary protein, and citrate, a much smaller molecule, are potent inhibitors of COM crystallization at levels present in normal urine. Current concepts of the role of site-specific interactions in crystallization derived from studies of biomineralization are reviewed to provide a context for understanding modulation of COM growth at a molecular level. Results from in situ atomic force microscopy (AFM) analyses of the effects of citrate and OPN on growth verified the critical role of site-specific interactions between these growth modulators and individual steps on COM crystal surfaces. Molecular modeling investigations of interactions of citrate with steps and faces on COM crystal surfaces provided links between the stereochemistry of interaction and the binding energy levels that underlie mechanisms of growth modification and changes in overall crystal morphology. The combination of in situ AFM and molecular modeling provides new knowledge that will aid rationale design of therapeutic agents for inhibition of stone formation.

Use of Wood Biomass in Slovakia

2014 ◽  
Vol 1001 ◽  
pp. 126-130
Author(s):  
Tomáš Bakalár ◽  
Henrieta Pavolová ◽  
Milan Búgel ◽  
Ľubica Kozáková
Keyword(s):  
Energy Source ◽  
Renewable Energy Source ◽  
Renewable Energy ◽  
Organic Material ◽  
Chemical Processes ◽  
Wood Chips ◽  
Wood Biomass ◽  
Biochemical Processes ◽  
Physical Chemical ◽  
Thermochemical Processes

Biomass is organic material, the second most important source of energy. Biomass is a renewable energy source. Wood biomass is used as source of energy for heating in many regions in Slovakia. It is because of its availability. Wood biomass is an easily accessible and affordable source of energy. At present, thermochemical processes, biochemical processes and physical-chemical processes are used for biomass utilization. In the article a suitable technology for combustion of wood chips is proposed. It consists of five main technological parts: transport of wood chips, silo, combustion boiler, and stack.

Radical Mechanisms in Saturated and Olefinic Systems. II. Disubstitutive Carbon-Carbon Cross-Linking by Tertiary Alkoxy Radicals in Isoprenic Olefins and Rubber

1951 ◽  
Vol 24 (4) ◽  
pp. 777-786
Author(s):  
E. H. Farmer ◽  
C. G. Moore
Keyword(s):  
Natural Rubber ◽  
Cross Linking ◽  
Chain Molecules ◽  
Alkoxy Radicals ◽  
Full Extent ◽  
Carbon Chains ◽  
Butyl Peroxide ◽  
High Degree ◽  
Vulcanization Process

Abstract The high degree of dehydrogenation effected by tert.-butoxy radicals at the α-methylenic groups of olefins enables these radicals to be used for the carbon-to-carbon cross-linking of unsaturated carbon chains, and especially of the polyisoprenic chains of natural rubber. Such cross-linking amounts to a vulcanization process in which the connecting links between chain molecules are just C—C bonds, which may be expected to have appropriate attributes. An examination has first been made of the cross-linking produced by tert.- butoxy radicals (from di-tert.-butyl peroxide) at 140° between the short iso-prenic chains in 1-methylcyclohexene, 4-methylhept-3-ene, 2,6-dimethylocta-2, 6-diene, and digeranyl. Cross-linking proceeds efficiently in each case, and the points of union in these isoprene units which become directly joined are not confined to original α-methylenic carbon atoms. Where the reagent radicals are in considerable deficit, e.g., one per two or three of the isoprene units present, those olefin molecules which are attacked become linked together mostly by single unions to form aggregates containing two, three or four molecules; but in the tetraisoprenic olefins the extent to which more than one union is formed between some of the directly linked molecules becomes appreciable. In natural rubber, cross-linking occurs smoothly and to nearly the full extent corresponding to the (in practice restricted) proportion of peroxidic reagent employed. Good vulcanizates can be so obtained in which the tensile stength is found to increase towards a maximum and then to decline rapidly as the degree of cross-linking steadily increases. Thus to obtain vulcanizates of the optimum physical characteristics, the degree of cross-linking must be suitably chosen. The role of the peroxidic reagent is almost entirely non-additive and non-degradative.

Sign in / Sign up

Export Citation Format

Share Document