scholarly journals Study on torsional vibration characteristics of small high-speed marine diesel engine crankshaft system with viscous friction damper

2017 ◽  
Vol 41 (8) ◽  
pp. 723-731
Author(s):  
Tomoaki Kodama ◽  
Yasuhiro Honda
Keyword(s):  
Diesel Engine ◽  
Torsional Vibration ◽  
High Speed ◽  
Viscous Friction ◽  
Vibration Characteristics ◽  
Marine Diesel Engine ◽  
Friction Damper ◽  
Marine Diesel ◽  
Engine Crankshaft

Transient and Unstable Torsional Vibrations on a 4-Stroke Marine Diesel Engine

2003 ◽  
Author(s):  
D. C. Lee ◽  
J. D. Yu
Keyword(s):  
Diesel Engine ◽  
Torsional Vibration ◽  
Marine Diesel Engine ◽  
Torsional Vibrations ◽  
Steady State Condition ◽  
Marine Propulsion ◽  
Friction Clutch ◽  
Marine Diesel ◽  
Noise Measurements ◽  
Unstable Vibration

Under steady state condition, unstable torsional vibration normally does not occur in shafting systems using 4stroke diesel engine due to hysteresis damping of shafting system and relative damping of standard fitted damper. However, the unstable torsional vibration occurs on marine propulsion shafting systems due to slippage of a multi-friction clutch installed between increasing gear box and shaft generator. To identify this unstable vibration and make proper counter measure, the simulation for transient torsional vibration using the Newmark method is introduced in this paper. The mechanism of this unstable vibration is verified by vibration and noise measurements of the shafting system.

Research for the Crack Dynamic Monitoring of Marine Diesel Engine

2014 ◽  
Vol 556-562 ◽  
pp. 3107-3111
Author(s):  
Zhi Min Yu ◽  
Shi Hai Zhang ◽  
Shi Xun Jiang
Keyword(s):  
Diesel Engine ◽  
Fatigue Fracture ◽  
Dynamic Balance ◽  
Dynamic Monitoring ◽  
Influence Coefficient ◽  
Marine Diesel Engine ◽  
Balance System ◽  
Marine Diesel ◽  
Field Dynamic ◽  
Engine Crankshaft

crankshaft is one of the most important parts and crankshaft fatigue fracture is a major failure. In order to alert fatigue fracture of crankshaft to prevent accidents, diesel engine crankshaft dynamic monitoring based on the actual situations of diesel engines, significance of dynamic balance for marine diesel engine crankshaft system is discussed and as well vibration monitoring and field dynamic balance system for diesel engine crankshaft system is constructed. The least square method is applied to fit fundamental frequency vibration signals of crankshaft system and the field dynamic balance strategy is designed on the basis of the influence coefficient method. The feasibility of the dynamic balance system is tested through experiments in the paper.

New In-Situ Technology for Marine Diesel Engine Crankshaft Renovation and its 3D Surface Texture Model

2012 ◽  
Author(s):  
Toms Torims ◽  
Branko Katalinic ◽  
Andris Ratkus ◽  
Janis Vilcans ◽  
Marcis Zarins
Keyword(s):  
Surface Roughness ◽  
Diesel Engine ◽  
Machining Process ◽  
Marine Diesel Engine ◽  
Roughness Parameters ◽  
Surface Roughness Parameters ◽  
3D Surface ◽  
Crankshaft Journal ◽  
Marine Diesel ◽  
Engine Crankshaft

Repairing marine diesel engine crankshafts is a significant part of overall engine repairs and thus is very important for the ship building and ship repair industry. When a ship’s diesel engine is repaired, crankshaft journal surfaces must be renewed according to very precise geometrical and surface roughness requirements. Although current technologies are sufficient to meet these requirements, they are very time consuming and consequently expensive. A comprehensive research into the surface machining of marine diesel engine crankshaft journals allowed to improve technological processes and to identify respective surface roughness parameters, as well as to provide appropriate technological recommendations. It is important to note that crankshaft journal surfaces must be seen as 3D objects, whose micro-topographical surface roughness parameters have to be defined so that they reflect the actual surface. To summarize all available scientific research in this field, we can state that there has been no analysis into the impact of technological regimes on the surface micro-topography of marine engine crankshaft journals. Bearing in mind the aforementioned arguments a study has been launched to develop a novel grinding technology, enabling diesel engine crankshafts with medium-sized crankpin journals to be repaired directly inside the engine housing. This paper covers the following issues: 1) Description of the novel technological equipment for crankshaft journal grinding; 2) 3D roughness model of the crankshaft journal surface; 3) calculation of 3D parameters based on practical metrological and technological characteristics. This technology saves significant financial resources as well as reduces engine repair time. By solving problems related to surface accuracy, it is possible to considerably improve the crankshaft machining process, along with the performance of maintenance operations and consequently the overall quality of repair work. In this paper, the crankshaft journal surfaces will be defined using 3D surface roughness parameters.

Probabilistic Torsional Vibration Analysis of a Marine Diesel Engine Shafting System: The Level Crossing Problem

1989 ◽  
Vol 56 (4) ◽  
pp. 953-959 ◽  
Author(s):  
Efstratios Nikolaidis ◽  
Anastassios N. Perakis ◽  
Michael G. Parsons
Keyword(s):  
Diesel Engine ◽  
Torsional Vibration ◽  
Probabilistic Approach ◽  
Series Representation ◽  
Harmonic Series ◽  
Complex Conjugate ◽  
Time Interval ◽  
Marine Diesel Engine ◽  
Level Crossing ◽  
Marine Diesel

A probabilistic approach to the torsional vibration problem of a marine diesel engine shafting system has been developed. In this analysis, the shafting shear stress is found to be a Gaussian, harmonizable cyclostationary process with a harmonic series representation consisting of two complex conjugate components. In this paper, the level crossing problem for this stress process is studied. Two methods for estimating the probability that the stress exceeds a specified threshold at least once over a given time interval are presented. In the first method, a local maximum of the process is approximated by the value of the corresponding envelope at the time of occurrence of this maximum. A Markov-type condition is assumed to hold for the local maxima. The second method assumes that the maximum of the process over a reasonable number of cycles is approximately equal to that of the envelope process. The envelope crossings are assumed to constitute a Poisson process. The two methods are applied to estimate the upcrossing probability in various cases. The results of both approaches are found to be in good agreement with those from Monte Carlo simulation.

Performance Calculation of a TBD234V12 Diesel Engine with STC

2012 ◽  
Vol 157-158 ◽  
pp. 1075-1078
Author(s):  
Yang Wang ◽  
Yin Yan Wang ◽  
Fan Shi ◽  
Xin Guang Li
Keyword(s):  
Experimental Data ◽  
Diesel Engine ◽  
Computer Model ◽  
High Speed ◽  
Marine Diesel Engine ◽  
High Speed Diesel ◽  
Turbocharging System ◽  
Marine Diesel ◽  
Performance Calculation ◽  
Good Agreement

A computer model for a TBD234V12 marine high-speed diesel engine with 2 turbocharger(2TC) is built on GT-POWER. For validating the computer model, a calculation to the conventional turbocharging system has been done firstly, and the results show good agreement with experimental data. The computer model has then been used for predictive studies of the diesel engine with the proposed STC system on the mapping characteristics. From these results, it can be seen that the STC system can not only improve the part load performance of the diesel engine obviously, but also enlarge the operating range of the marine diesel engine.

Sign in / Sign up

Export Citation Format

Share Document