scholarly journals PtCoNb2O5/graphene as electrocatalyst towards oxygen reduction reaction in alkaline and acidic media

Chemija ◽  
2018 ◽  
Vol 29 (1) ◽  
Author(s):  
Virginija Kepenienė ◽  
Raminta Stagniūnaitė ◽  
Loreta Tamašauskaitė-Tamašiūnaitė ◽  
Vidas Pakštas ◽  
Eugenijus Norkus
Keyword(s):  
Oxygen Reduction Reaction ◽  
Oxygen Reduction ◽  
Cobalt Catalyst ◽  
Linear Sweep Voltammetry ◽  
Rotating Disk ◽  
Reduction Reaction ◽  
Rotating Disk Electrode ◽  
Acidic Media ◽  
Acidic Solutions ◽  
Supported Platinum

The aim of the study was to prepare and to investigate the catalytic activity of the Nb2O5/graphene-supported platinum–cobalt catalyst for the oxygen reduction reaction (ORR) in alkaline and acidic media. Electrocatalytic properties of the prepared catalyst towards the oxygen reduction reaction were characterized by using cyclic voltammetry (CV) and rotating disk electrode (RDE) linear sweep voltammetry (LSV). It has been found that the PtCoNb2O5/graphene catalyst shows more positive onset potentials, as well as higher current in the mixed-kineticdiffusion region towards the oxygen reduction reaction in both alkaline and acidic solutions as compared with those for the bare Pt/GR catalyst.

scholarly journals Carbon Supported Platinum-Molybdenum Alloy Nanoparticles for Oxygen Reduction Reaction

2021 ◽  
Vol 33 (5) ◽  
pp. 1153-1158
Author(s):  
Natarajan Manivannan ◽  
Vijai Shankar Balachandran ◽  
V.S. Vasantha
Keyword(s):  
Oxygen Reduction Reaction ◽  
Oxygen Reduction ◽  
Rotating Disk ◽  
Reduction Reaction ◽  
Rotating Disk Electrode ◽  
Pt Catalyst ◽  
Widespread Application ◽  
Supported Platinum ◽  
Orr Activity ◽  
Made In

Fuel cells are gaining importance in the emerging area of power generation. However, sluggishness of the cathodic oxygen reduction reaction (ORR) and usage of expensive electrocatalysts are hindering its widespread application. Hence, an effort has been made in the present study to synthesize efficient electrocatalysts based on Pt-Mo alloys with varying atomic ratios (0-100 at. %) by thermal decomposition method. The synthesized samples were characterized using XRD, SEM, TEM and XPS techniques. The electrocatalytic activity for ORR was measured using cyclic voltammetry and rotating disk electrode for all the samples and Pt-Mo (1:1) electrocatalyst performed better among the synthesized electrocatalysts with ORR current density of 63 mA/cm2 at an applied potential of 0.6 V vs. Hg/HgSO4. The present study suggests that Pt-Mo studied are proven to be a superior catalyst than a costly Pt catalyst with high ORR activity.

scholarly journals Eco-Friendly Nitrogen-Doped Graphene Preparation and Design for the Oxygen Reduction Reaction

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3858
Author(s):  
Monica Dan ◽  
Adriana Vulcu ◽  
Sebastian A. Porav ◽  
Cristian Leostean ◽  
Gheorghe Borodi ◽  
...  
Keyword(s):  
Oxygen Reduction Reaction ◽  
Oxygen Reduction ◽  
Rotating Disk ◽  
Reduction Reaction ◽  
Machine Learning Algorithms ◽  
Rotating Disk Electrode ◽  
X Ray ◽  
Synthesis Conditions ◽  
Characterization Techniques ◽  
Doped Graphene

Four N-doped graphene materials with a nitrogen content ranging from 8.34 to 13.1 wt.% are prepared by the ball milling method. This method represents an eco-friendly mechanochemical process that can be easily adapted for industrial-scale productivity and allows both the exfoliation of graphite and the synthesis of large quantities of functionalized graphene. These materials are characterized by transmission and scanning electron microscopy, thermogravimetry measurements, X-ray powder diffraction, X-ray photoelectron and Raman spectroscopy, and then, are tested towards the oxygen reduction reaction by cyclic voltammetry and rotating disk electrode methods. Their responses towards ORR are analysed in correlation with their properties and use for the best ORR catalyst identification. However, even though the mechanochemical procedure and the characterization techniques are clean and green methods (i.e., water is the only solvent used for these syntheses and investigations), they are time consuming and, generally, a low number of materials can be prepared, characterized and tested. In order to eliminate some of these limitations, the use of regression learner and reverse engineering methods are proposed for facilitating the optimization of the synthesis conditions and the materials’ design. Thus, the machine learning algorithms are applied to data containing the synthesis parameters, the results obtained from different characterization techniques and the materials response towards ORR to quickly provide predictions that allow the best synthesis conditions or the best electrocatalysts’ identification.

Methanol-Tolerant Oxygen Reduction Reaction at Pt–Pd/C Alloy Nanocatalysts

2010 ◽  
Vol 8 (1) ◽  
Author(s):  
A. Mary Remona ◽  
K. L. N. Phani
Keyword(s):  
Oxygen Reduction Reaction ◽  
Oxygen Reduction ◽  
Rotating Disk ◽  
Reduction Reaction ◽  
Rotating Disk Electrode ◽  
Methanol Tolerance ◽  
Pd Catalysts ◽  
Onset Potential ◽  
Direct Methanol ◽  
Methanol Tolerant

Carbon-supported platinum and Pt–Pd alloy electrocatalysts with different Pt/Pd atomic ratios were synthesized by a microemulsion method at room temperature (metal loading is 10 wt %). The Pt–Pd/C bimetallic catalysts showed a single-phase fcc structure and the mean particle size of Pt–Pd/C catalysts was found to be lower than that of Pt/C. The methanol-tolerant studies of the catalysts were carried out by activity evaluation of oxygen reduction reaction (ORR) on Pt–Pd catalysts using a rotating disk electrode (RDE). The studies indicated that the order of methanol tolerance was found to be PtPd3/C>PtPd/C>Pt3Pd/C. The oxygen reduction activities of all Pt–Pd/C were considerably larger than that of Pt/C with respect to onset and overpotential values. The Pd-loaded catalysts shift the onset potential of ORR by 125 mVMSE, 53 mVMSE, and 41 mVMSE to less cathodic potentials for Pt3Pd/C, PtPd/C, and PtPd3/C, respectively, with reference to Pt/C and the Pt3Pd/C catalyst showed greater shift in the onset value than the other PtPd catalysts reported in literature. Moreover, the Pt–Pd/C catalysts exhibited much higher methanol tolerance during ORR than the Pt/C, assessing that these catalysts may function as a methanol-tolerant cathode catalysts in a direct methanol fuel cell.

Ethanol: Tolerant Oxygen Reduction Reaction Catalysts in Alkaline Media

2018 ◽  
Vol 16 (2) ◽  
Author(s):  
Chakkrapong Chaiburi ◽  
Bernd Cermenek ◽  
Birgit Elvira Pichler ◽  
Christoph Grimmer ◽  
Viktor Hacker
Keyword(s):  
Oxygen Reduction Reaction ◽  
Oxygen Reduction ◽  
State Of The Art ◽  
Rotating Disk ◽  
Reduction Reaction ◽  
Rotating Disk Electrode ◽  
Alkaline Media ◽  
Direct Ethanol Fuel Cells ◽  
X Ray ◽  
Transmission Electron

This paper describes electrocatalysts for the oxygen reduction reaction (ORR) in alkaline direct ethanol fuel cells (ADEFCs), using the non-noble metal electrocatalyst Ag/C, MnO2/C and AgMnO2/C. These electrocatalysts showed tolerance toward ethanol in alkaline media and therefore resistance to ethanol crossover in ADEFCs. Transmission electron microscopy, X-ray spectroscopy (EDX), cyclic voltammetry, and rotating disk electrode (RDE) were employed to determine the morphology, composition, and electrochemical activity of the catalysts. The herein presented results confirm that the AgMnO2/C electrocatalyst significantly outperforms the state-of-the art ORR catalyst platinum.

Mn-Co oxide/PEDOT as a bifunctional electrocatalyst for oxygen evolution/reduction reactions

2015 ◽  
Vol 1777 ◽  
pp. 1-6 ◽  
Author(s):  
Elaheh Davari ◽  
Douglas G. Ivey
Keyword(s):  
Oxygen Reduction ◽  
Oxygen Evolution ◽  
Linear Sweep Voltammetry ◽  
Microstructural Characterization ◽  
Rotating Disk ◽  
Reduction Reaction ◽  
Rotating Disk Electrode ◽  
Bifunctional Electrocatalyst ◽  
Bifunctional Electrocatalysts ◽  
Anodic Electrodeposition

ABSTRACTBifunctional electrocatalysts, which facilitate the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), are vital components in advanced metal-air batteries. Results are presented for carbon-free, nanocrystalline, rod-like, Mn-Co oxide/PEDOT bifunctional electrocatalysts, prepared by template-free sequential anodic electrodeposition. Electrochemical characterization of synthesized electrocatalysts, with and without a conducting polymer (PEDOT) coating, was performed using cyclic voltammetry (CV) and linear sweep voltammetry (LSV). In addition, microstructural characterization was conducted using SEM, TEM, STEM and XPS. Mn-Co oxide/PEDOT showed improved ORR/OER performance relative to Mn-Co oxide and PEDOT. On the basis of rotating disk electrode (RDE) experiments, Mn-Co oxide/PEDOT displayed the desired 4-electron transfer oxygen reduction pathway. Comparable ORR activity and superior OER activity relative to commercial Pt/C were observed.

scholarly journals N8− Polynitrogen Stabilized on Nitrogen-Doped Carbon Nanotubes as an Efficient Electrocatalyst for Oxygen Reduction Reaction

Catalysts ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 864 ◽  
Author(s):  
Zhenhua Yao ◽  
Ruiyang Fan ◽  
Wangyang Ji ◽  
Tingxuan Yan ◽  
Maocong Hu
Keyword(s):  
Carbon Nanotubes ◽  
Oxygen Reduction Reaction ◽  
Oxygen Reduction ◽  
Rotating Disk ◽  
Reduction Reaction ◽  
Rotating Disk Electrode ◽  
Nitrogen Doped ◽  
Metal Free ◽  
Temperature Programmed ◽  
Nitrogen Doped Carbon

In this work, non-traditional metal-free polynitrogen chain N8− deposited on a nitrogen-doped carbon nanotubes (PN-NCNT) catalyst was successfully synthesized by a facile cyclic voltammetry (CV) approach, which was further tested in an oxygen reduction reaction (ORR). The formation of PN on NCNT was confirmed by attenuated total reflectance–Fourier transform infrared spectroscopy (ATR-FTIR) and Raman spectroscopy. Partial positive charge of carbon within NCNT facilitated electron transfer and accordingly induced the formation of more PN species compared to CNT substrate as determined by temperature-programmed decomposition (TPD). Rotating disk electrode (RDE) measurements suggested that a higher current density was achieved over PN-NCNT than that on PN-CNT catalyst, which can be attributed to formation of the larger amount of N8− on NCNT. Kinetic study suggested a four-electron pathway mechanism over PN-NCNT. Moreover, it showed long stability and good methanol tolerance, which indicates its great potential application. This work provides insights on designing and synthesizing non-traditional metal-free catalysts for ORR in fuel cells.

scholarly journals MOF-Derived CuPt/NC Electrocatalyst for Oxygen Reduction Reaction

Catalysts ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 799 ◽  
Author(s):  
Rehan Anwar ◽  
Naseem Iqbal ◽  
Saadia Hanif ◽  
Tayyaba Noor ◽  
Xuan Shi ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Oxygen Reduction Reaction ◽  
Oxygen Reduction ◽  
Photoelectron Spectroscopy ◽  
Rotating Disk ◽  
Reduction Reaction ◽  
Rotating Disk Electrode ◽  
X Ray ◽  
Onset Potential ◽  
Orr Activity

Metal-organic frameworks (MOFs) have been at the center stage of material science in the recent past because of their structural properties and wide applications in catalysis. MOFs have also been used as hard templates for the preparation of catalysts. In this study, highly active CuPt/NC electrocatalyst was synthesized by pyrolyzing Cu-tpa MOF along with Pt precursor under flowing Ar-H2 atmosphere. The catalyst was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and X-ray powder diffraction (XRD). Rotating disk electrode study was performed to determine the oxygen reduction reaction (ORR) activity for CuPt/NC in 0.1 M HClO4 at different revolutions per minute (400, 800, 1200, and 1600) and it was also compared with commercial Pt/C catalyst. Further the ORR performance was evaluated by K-L plots and Tafel slope. CuPt/NC shows excellent ORR performance with onset potential of 0.9 V (vs. RHE), which is comparable with commercial Pt/C. The ORR activity of CuPt/NC is demonstrated as an efficient electrocatalyst for fuel cell.

Sign in / Sign up

Export Citation Format

Share Document