scholarly journals 3D model of a Monolithic Honeycomb Adsorber for Electric Swing Adsorption for Carbon Dioxide Capture

2020 ◽  
Vol 12 (1) ◽  
Author(s):  
Ivaná Đukic ◽  
Marija Ječmenica Dučić ◽  
Nikola Nikačević ◽  
Menka Petkovska
Keyword(s):  
Carbon Dioxide ◽  
Physical Properties ◽  
Power Plants ◽  
3D Model ◽  
Carbon Dioxide Capture ◽  
Comsol Multiphysics ◽  
Simulation And Optimization ◽  
Electrothermal Desorption ◽  
1D Model ◽  
Simulation Results

The goal of this work was to develop a 3D model of Electric Swing Adsorption pro- cess for carbon dioxide capture from effluent gasses from power plants. Detailed 3D model of the composite honeycomb monolithic adsorber was developed for a sin- gle monolith channel and can be used to simulate and represent different physical properties: velocity, concentration and temperature. The advantage of this model is the fact that all physical properties and results can be presented visually in the 3D domain. COMSOL Multiphysics software was used for solving partial differential equations and simulations of adsorption and electrothermal desorption processes. Some simulation results are presented in this work. The results obtained from 3D simulations will be used for the adsorber model reduction to the 1D model which will be used for modeling and optimization of the whole ESA cycle due to its sim- plicity and computational demands. Simulation and optimization runs based on the 1D model will be performed in g-Proms software.

Techno-Economic Evaluation of Pressurized Oxy-Fuel Combustion Systems

2010 ◽  
Author(s):  
Jongsup Hong ◽  
Ahmed F. Ghoniem ◽  
Randall Field ◽  
Marco Gazzino
Keyword(s):  
Carbon Dioxide ◽  
Carbon Dioxide Emissions ◽  
Power Plants ◽  
Carbon Dioxide Capture ◽  
Fuel Combustion ◽  
Economic Feasibility ◽  
Operating Conditions ◽  
Air Separation ◽  
Separation Unit ◽  
Coal Price

Oxy-fuel combustion coal-fired power plants can achieve significant reduction in carbon dioxide emissions, but at the cost of lowering their efficiency. Research and development are conducted to reduce the efficiency penalty and to improve their reliability. High-pressure oxy-fuel combustion has been shown to improve the overall performance by recuperating more of the fuel enthalpy into the power cycle. In our previous papers, we demonstrated how pressurized oxy-fuel combustion indeed achieves higher net efficiency than that of conventional atmospheric oxy-fuel power cycles. The system utilizes a cryogenic air separation unit, a carbon dioxide purification/compression unit, and flue gas recirculation system, adding to its cost. In this study, we perform a techno-economic feasibility study of pressurized oxy-fuel combustion power systems. A number of reports and papers have been used to develop reliable models which can predict the costs of power plant components, its operation, and carbon dioxide capture specific systems, etc. We evaluate different metrics including capital investments, cost of electricity, and CO2 avoidance costs. Based on our cost analysis, we show that the pressurized oxy-fuel power system is an effective solution in comparison to other carbon dioxide capture technologies. The higher heat recovery displaces some of the regeneration components of the feedwater system. Moreover, pressurized operating conditions lead to reduction in the size of several other critical components. Sensitivity analysis with respect to important parameters such as coal price and plant capacity is performed. The analysis suggests a guideline to operate pressurized oxy-fuel combustion power plants in a more cost-effective way.

scholarly journals A study on CO2 absorption using hybrid solvents in packed columns

2019 ◽  
Author(s):  
Ravinder Kumar ◽  
Mohammad Hossein Ahmadi ◽  
Dipen Kumar Rajak ◽  
Mohammad Alhuyi Nazari
Keyword(s):  
Carbon Dioxide ◽  
Co2 Capture ◽  
Power Plants ◽  
Large Scale ◽  
Carbon Dioxide Capture ◽  
Packed Column ◽  
Absorption Efficiency ◽  
Co2 Absorption ◽  
Process Industries ◽  
Carbon Dioxide Co2

Abstract Greenhouse gases emissions from large scale industries as well as gasoline based vehicles are mainly responsible for global warming since the 1980s. At present, it has triggered global efforts to reduce the level of GHG. The contribution of carbon dioxide (CO2) in polluting the environment is at a peak due to the excessive use of coal in power plants. So, serious attention is required to reduce the level of CO2 using advanced technologies. Carbon dioxide capture and storage may play an important role in this direction. In process industries, various carbon dioxide capture techniques can be used to reduce CO2 emissions. However, post-combustion carbon dioxide capture is on top priority. Nowadays the researcher is focusing their work on CO2 capture using hybrid solvent. This work highlights a review of carbon dioxide capture using various kind of hybrid solvent in a packed column. The various challenges for absorption efficiency enhancement and future direction are also discussed in the present work. It is concluded through the literature survey that hybrid solvent shows better efficiency in comparison to the aqueous solution used for CO2 capture.

Greener Solvent Selection and Solvent Recycling for Carbon Dioxide Capture

2012 ◽  
Vol 5 (1) ◽  
Author(s):  
G. Hachem ◽  
J. Salazar ◽  
U. Dixekar
Keyword(s):  
Carbon Dioxide ◽  
Simulated Annealing ◽  
Carbon Capture ◽  
Power Plants ◽  
Carbon Dioxide Capture ◽  
Carbon Capture And Storage ◽  
Aspen Plus ◽  
Solvent Selection ◽  
Carbon Dioxide Co2 ◽  
And Storage

Carbon capture and storage (CCS) constitutes an extremely important technology that is constantly being improved to minimize the amounts of carbon dioxide (CO2) entering the atmosphere. According to the Global CCS Institute, there are more than 320 worldwide CCS projects at different phases of progress. However, current CCS processes are accompanied with a large energy and efficiency penalty. This paper models and simulates a post-combustion carbon capture system, that uses absorption as a method of separation, in Aspen Plus V7.2. Moreover, the CAPE-OPEN Simulated Annealing (SA) Capability is implemented to minimize the energy consumed by this system, and allow coal-fired power plants to use similar carbon capture systems without losing 20 to 40 % of the plant's output.

scholarly journals Development of Multimode Gas Fired Combined Cycle Chemical-Looping Combustion Based Power Plant Lay-Outs

2021 ◽  
Author(s):  
Basavaraja Revappa Jayadevappa
Keyword(s):  
Carbon Dioxide ◽  
Power Plant ◽  
Natural Gas ◽  
Flue Gas ◽  
Power Plants ◽  
Carbon Dioxide Capture ◽  
Combined Cycle ◽  
Chemical Looping Combustion ◽  
Chemical Looping ◽  
Operating Pressure

Abstract Operation of power plants in carbon dioxide capture and non-capture modes and energy penalty or energy utilization in such operations are of great significance. This work reports on two gas fired pressurized chemical-looping combustion power plant lay-outs with two inbuilt modes of flue gas exit namely, with carbon dioxide capture mode and second mode is letting flue gas (consists carbon dioxide and water) without capturing carbon dioxide. In the non-CCS mode, higher thermal efficiencies of 54.06% and 52.63% efficiencies are obtained with natural gas and syngas. In carbon capture mode, a net thermal efficiency of 52.13% is obtained with natural gas and 48.78% with syngas. The operating pressure of air reactor is taken to be 13 bar for realistic operational considerations and that of fuel reactor is 11.5 bar. Two power plant lay-outs developed based combined cycle CLC mode for natural gas and syngas fuels. A single lay-out is developed for two fuels with possible retrofit for dual fuel operation. The CLC Power plants can be operated with two modes of flue gas exit options and these operational options makes them higher thermal efficient power plants.

Integration of heat recovery unit in coal fired power plants to reduce energy cost of carbon dioxide capture

2018 ◽  
Vol 229 ◽  
pp. 900-909 ◽  
Author(s):  
Ravinder K. Garlapalli ◽  
Michael W. Spencer ◽  
Khairul Alam ◽  
Jason P. Trembly
Keyword(s):  
Carbon Dioxide ◽  
Energy Cost ◽  
Heat Recovery ◽  
Power Plants ◽  
Carbon Dioxide Capture ◽  
Recovery Unit

scholarly journals Process Evaluation of Carbon Dioxide Capture for Coal-Fired Power Plants

2014 ◽  
Vol 4 (2) ◽  
Author(s):  
Satoshi Kodama ◽  
Kazuya Goto ◽  
Hidetoshi Sekiguchi
Keyword(s):  
Carbon Dioxide ◽  
Process Evaluation ◽  
Power Plants ◽  
Carbon Dioxide Capture

Carbon Dioxide Capture Using Sorbent-Loaded Hollow-Fiber Modules for Coal-Fired Power Plants

2021 ◽  
pp. 1-28
Author(s):  
Bachir El Fil ◽  
Dhruv C. Hoysall ◽  
Srinivas Garimella
Keyword(s):  
Carbon Dioxide ◽  
Power Plant ◽  
Hollow Fiber ◽  
Carbon Capture ◽  
Power Plants ◽  
Carbon Dioxide Capture ◽  
Electrical Energy ◽  
Parasitic Load ◽  
Temperature Swing Adsorption ◽  
The Impact

Abstract The impact of post-combustion carbon dioxide capture on the performance of a power plant is evaluated. A model of a coal power plant with post-combustion temperature swing adsorption CO2 capture using sorbent-loaded hollow fibers is presented. The resulting performance and cost of carbon capture are compared with those of other adsorption-based technologies. A parametric analysis of the performance of the power plant with respect to key parameters in the hollow fiber module operation is presented. It is found that electrical energy consumption for the compression of CO2 is a major parasitic load common to all absorption technologies and accounts for almost half of the total parasitic load. The effect of source temperature, flue gas fan and coupling fluid pump flow rates on overall system performance is presented. The impacts of different carbon capture technologies on the same coal-fired power plant are compared. Hollow fiber modules had the lowest parasitic load on the power plant, followed by KS-2 based carbon capture.

Sign in / Sign up

Export Citation Format

Share Document