scholarly journals A Cylindrical Wideband Conformal Fractal Antenna for GPS Application

2017 ◽  
Vol 6 (3) ◽  
pp. 64
Author(s):  
R. Sahoo ◽  
D. Vakula
Keyword(s):  
Conformal Geometry ◽  
Ground Plane ◽  
Antenna Design ◽  
Fractal Antenna ◽  
Frequency Range ◽  
Bandwidth Enhancement ◽  
Conformal Antenna ◽  
Operating Frequency Range ◽  
Definition Of ◽  
Good Agreement

In this paper, a novel wideband conformal fractal antenna is proposed for GPS application. The concepts of fractal and partial ground are used in conformal antenna design for miniaturization and bandwidth enhancement. It comprises of Minkowski fractal patch on a substrate of Rogers RT/duroid 5880 with permittivity 2.2 and thickness of 0.787mm with microstrip inset feed. The proposed conformal antenna has a patch dimension about 0.39λmm×0.39λmm, and partial ground plane size is 29mm×90mm.The proposed antenna is simulated, fabricated and measured for both planar and conformal geometry, with good agreement between measurements and simulations. The size of the fractal patch is reduced approximately by 32% as compared with conventional patch. It is observed that the conformal antenna exhibits a fractional bandwidth(for the definition of -10dB) of 43.72% operating from 1.09 to 1.7GHz, which is useful for L1(1.56-1.58GHz), L2(1.21-1.23GHz), L3(1.37-1.39GHz), L4(1.36-1.38GHz), and L5(1.16-1.18 GHz) in GPS and Galileo frequencies: E=1589.742MHz(4MHzbandwidth), E2=1561. 098MHz(4MHzbandwidth), E5a=1176.45MHz(=L5),E5b= 1207.14MHz, and E6=1278.75MHz(40MHz bandwidth). The radiation pattern exhibits an omnidirectional pattern, and gain of proposed antenna is 2.3dBi to 3.5dBi within operating frequency range.

CPW-fed circular-shaped fractal antenna with three iterations for UWB applications

2015 ◽  
Vol 9 (2) ◽  
pp. 373-379 ◽  
Author(s):  
Sarthak Singhal ◽  
Ankit Pandey ◽  
Amit Kumar Singh
Keyword(s):  
Coplanar Waveguide ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Fractal Antenna ◽  
Frequency Range ◽  
Fractal Structures ◽  
Antenna Structure ◽  
Uwb Applications ◽  
Good Agreement

A coplanar waveguide (CPW)-fed circular-shaped fractal antenna with third iterative orthogonal elliptical slot for ultra-wideband applications is presented. The bandwidth is enhanced by using successive iterations of radiating patch, CPW feedline, and tapered ground plane. An impedance bandwidth of 2.9–20.6 GHz is achieved. The designed antenna has omnidirectional radiation patterns along with average peak realized gain of 3.5 dB over the entire frequency range of operation. A good agreement is observed between the simulated and experimental results. This antenna structure has the advantages of miniaturized size and wide bandwidth in comparison to previously reported fractal structures.

scholarly journals Design of Broadband Compact Canonical Triple-Sleeve Antenna Operating in UHF Band

2021 ◽  
Vol 21 (4) ◽  
pp. 291-298
Author(s):  
Chandana SaiRam ◽  
Damera Vakula ◽  
Mada Chakravarthy
Keyword(s):  
Wireless Communication ◽  
Instantaneous Frequency ◽  
Dipole Antenna ◽  
Frequency Range ◽  
Broadband Antenna ◽  
Operating Frequency Range ◽  
Half Wave ◽  
Measurement Results ◽  
Antenna Configuration ◽  
Good Agreement

In this paper, a novel compact broadband antenna at UHF frequencies is presented with canonical shapes. Hemispherical, conical and cylindrical shapes have all been considered for antenna configuration. The designed antenna provides an instantaneous frequency range from 370 to 5,000 MHz with omnidirectional characteristics. The antenna was simulated in CST Microwave Studio, fabricated and evaluated; the results are presented. The simulated and measurement results are in good agreement. The antenna has voltage standing wave ratio (VSWR) ≤ 1.9:1 in 400–570 MHz, 2,530–3,740 MHz and 4,180–4,620 MHz; it has VSWR ≤ 3:1 over the operating frequency range 370–5,000 MHz and the measured gain varies from -0.6 to 4.5 dBi over the frequency band. The concept of canonical-shaped antenna elements and the incorporation of triple sleeves resulted in a reduction of the length of the antenna by 62% compared to the length of a half-wave dipole antenna designed at the lowest frequency. The antenna can be used for trans-receiving applications in wireless communication.

Closed Loop Resonator Based Compact UWB Antenna with Single Notched Band Varying between WLAN and X-band for UWB Applications

Frequenz ◽  
2020 ◽  
Vol 74 (5-6) ◽  
pp. 201-209
Author(s):  
Mohammad Ahmad Salamin ◽  
Sudipta Das ◽  
Asmaa Zugari
Keyword(s):  
Closed Loop ◽  
Ground Plane ◽  
Frequency Range ◽  
Uwb Antenna ◽  
Notched Band ◽  
X Band ◽  
Compact Size ◽  
Simulation Results ◽  
Uwb Applications ◽  
Good Agreement

AbstractIn this paper, a novel compact UWB antenna with variable notched band characteristics for UWB applications is presented. The designed antenna primarily consists of an adjusted elliptical shaped metallic patch and a partial ground plane. The proposed antenna has a compact size of only 17 × 17 mm2. The suggested antenna covers the frequency range from 3.1 GHz to 12 GHz. A single notched band has been achieved at 7.4 GHz with the aid of integrating a novel closed loop resonator at the back plane of the antenna. This notched band can be utilized to alleviate the interference impact with the downlink X-band applications. Besides, a square slot was cut in the loop in order to obtain a variable notched band. With the absence and the existence of this slot, the notched band can be varied to mitigate interference of the upper WLAN band (5.72–5.82 GHz) and X-band (7.25–7.75 GHz) with UWB applications. A good agreement between measurement and simulation results was achieved, which affirms the appropriateness of this antenna for UWB applications.

MULTIBAND CPW-FED SLOT ANTENNA FOR WLAN/WIMAX APPLICATIONS

2015 ◽  
Vol 77 (10) ◽  
Author(s):  
Igbafe Orikumhi ◽  
Mohamad Rijal Hamid ◽  
Ali Nyangwarimam Obadiah
Keyword(s):  
Radiation Pattern ◽  
Return Loss ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Slot Antenna ◽  
Frequency Range ◽  
Resonant Frequencies ◽  
Good Agreement

A square slot antenna fed by a coplanar waveguide (CPW) is presented in this paper. The design consist of two pairs of “F” shaped planar strips placed within a square slotted ground. The strips are used to excite multiple resonant frequencies, the strips are connected to the ground plane by means of ideal switches. The proposed antenna has achieved multiple resonant frequencies of 2.4/5.2/5.8 GHz for WLAN and 3.5/5.5 for WiMAX applications. The measured results shows a good agreement with the simulated results in terms of return loss, radiation pattern and gain. The proposed antenna is designed for the frequency range of 2 GHz to 7 GHz which makes it suitable for Bluetooth, WLAN and WiMAX applications. 

scholarly journals High Directivity Broadband Hexagonal Fractal Ring Antenna with Modified Ground

2020 ◽  
Vol 18 (1) ◽  
pp. 1-8
Author(s):  
Tharanga Premathilake ◽  
Jeevani Jayasinghe ◽  
Omar Saraereh ◽  
Karu Esselle ◽  
Rajas Khokle
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Current Distribution ◽  
Wireless Lan ◽  
Ground Plane ◽  
Fractal Antenna ◽  
Frequency Range ◽  
Mode Of Operation ◽  
Resonant Behavior ◽  
Ring Antenna

A highly directive fractal antenna with a novel shape is proposed in this paper. Finite Element Method based simulations were carried out on the first three iterations of a hexagonal fractal ring and the performance was measured in terms of the resonant behavior, directivity, radiation efficiency, current distribution, and radiation pattern. The second iteration fractal antenna radiates well along the broadside direction at the fundamental mode of operation. The ground plane was modified to improve the performance further. The antenna, etched on an FR4 substrate, has a directivity of 11.8 dB along the broadside direction with multi-frequency broadband performance over the frequency range of 3.12-7.46 GHz. Therefore, the proposed fractal antenna can be used for Wireless LAN applications. The antenna was fabricated and measured in order to validate the results.

scholarly journals A Low-Profile Antenna Based on Single-Layer Metasurface for Ku-Band Applications

2020 ◽  
Vol 2020 ◽  
pp. 1-8
Author(s):  
Yadgar I. Abdulkarim ◽  
Halgurd N. Awl ◽  
Fahmi F. Muhammadsharif ◽  
Muharrem Karaaslan ◽  
Rashad H. Mahmud ◽  
...  
Keyword(s):  
Computer Simulation ◽  
Single Layer ◽  
Satellite Communications ◽  
Antenna Gain ◽  
Frequency Range ◽  
Low Profile ◽  
Operating Frequency Range ◽  
Measurement Results ◽  
Good Agreement ◽  
Ku Band

Improvement in the antenna gain is usually achieved at the expense of bandwidth and vice versa. This is where the realization of this enhancement can be made through compromising the antenna profile. In this work, we propose a new design of incorporating periodic metasurface array to enhance the bandwidth and gain while keeping the antenna to a low-profile scheme. The proposed antenna was simulated and fabricated in order to validate the results in the operating frequency range from 10 MHz to 43.5 GHz. Computer simulation technology (CST) microwave studio software was used to design and simulate the proposed antenna, while LPKF prototyping PCB machine was utilized to fabricate the antenna. Results showed that the antenna generated a gain and bandwidth of 14.2 dB and 2.13 GHz, respectively. Following the good agreement between the numerical and measurement results, it is believed that the proposed antenna can be potentially attractive for the application of satellite communications in Ku-band electromagnetic wave.

Triple-band operation achievement via multi-input multi-output antenna for wireless communication system applications

2019 ◽  
Vol 12 (3) ◽  
pp. 259-266 ◽  
Author(s):  
T. Azari-Nasab ◽  
CH. Ghobadi ◽  
B. Azarm ◽  
M. Majidzadeh
Keyword(s):  
Wireless Communication ◽  
Communication System ◽  
Ground Plane ◽  
Experimental Results ◽  
Frequency Range ◽  
Antenna Size ◽  
Mimo Antenna ◽  
Wireless Communication System ◽  
Operating Frequency Range ◽  
Triple Band

AbstractA multi-input multi-output (MIMO) antenna is designed and discussed for multi-band applications. The constituent antennas are composed of four L-shaped elements and a ground plane. When placed beside each other to form a MIMO antenna, a T-bar shaped parasitic structure is also embedded between the antennas on the backside of the substrate to increase the inter-element isolation. The triple-band performance of the antenna is observed at 2.15–2.73 GHz, 3.1–3.9 GHz, and 5.04–6 GHz. The isolation level of more than 20 is seen over the operating frequency range. The fabricated prototype of the MIMO antenna size is very compact (20 × 40 mm), printed on the FR4 substrate. Based on simulation and experimental results, the proposed design is useful for WiMAX and WLAN applications.

Design of WLAN/WiMAX band notch super-wideband microstrip fractal antennas

2019 ◽  
Vol 11 (08) ◽  
pp. 844-850 ◽  
Author(s):  
S. S. Abdpour ◽  
N. Azadi-Tinat ◽  
H. Oraizi ◽  
J. Ghalibafan
Keyword(s):  
Ring Resonator ◽  
Measurement Data ◽  
Split Ring Resonator ◽  
Fractal Antenna ◽  
Frequency Range ◽  
Split Ring ◽  
Feed Line ◽  
Simulation Results ◽  
3D Software ◽  
Good Agreement

AbstractA super-wideband microstrip fractal antenna is designed with miniaturized dimensions of 21 mm × 23.5 mm × 1 mm and generation of dual rejection bands for WLAN/WiMAX systems has been achieved. The triangular fractal shape slots are placed inside a circular patch and the antenna is miniaturized by using a repetition frequency resonance technique. The proposed antenna frequency range 2.6–40 GHz operates for VSWR of less than 2. Two band rejections for the frequency ranges 5.1–5.8 GHz and 3.4–3.7 GHz are created by one enhanced slot at the feed line and one split-ring resonator at the back of antenna. HFSS 3D software was used for computer simulation. The proposed antenna is fabricated on the FR4 substrate with 1 mm thickness. The measurement data show good agreement with the simulation results.

Bandwidth enhancement of a planar monopole microstrip patch antenna

2014 ◽  
Vol 8 (2) ◽  
pp. 237-242 ◽  
Author(s):  
Sudeep Baudha ◽  
Dinesh Kumar Vishwakarma
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Impedance Bandwidth ◽  
Communication Services ◽  
Bandwidth Enhancement ◽  
Microstrip Patch ◽  
Peak Gain ◽  
Good Agreement

This paper presents a simple broadband planar monopole microstrip patch antenna with curved slot and partial ground plane. The proposed antenna is designed and fabricated on commercially available FR4 material with εr = 4.3 and 0.025 loss tangent. Bandwidth enhancement has been achieved by introducing a curved slot in the patch and optimizing the gap between the patch and the partial ground plane and the gap between the curved slot and the edge of the patch. Simulated peak gain of the proposed antenna is 4.8 dB. The impedance bandwidth (defined by 10 dB return loss) of the proposed antenna is 109% (2–6.8 GHz), which shows bandwidth enhancement of 26% as compared with simple monopole antenna. The antenna is useful for 2.4/5.2/5.8-GHz WLAN bands, 2.5/3.5/5.5-GHz WiMAX bands, and other wireless communication services. Measured results show good agreement with the simulated results. The proposed antenna details are described and measured/simulated results are elaborated.

scholarly journals Design of Tunable Monopole Arm Planar Spiral Antenna for Cognitive Radio

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Rahul Yadav
Keyword(s):  
Cognitive Radio ◽  
Frequency Tuning ◽  
Impedance Matching ◽  
Ground Plane ◽  
Excitation Frequency ◽  
Antenna Design ◽  
Frequency Range ◽  
Spiral Antenna ◽  
Front End ◽  
Quarter Wavelength

This paper presents a spiral antenna design operating in the frequency range of 1–15 GHz having both selective notch bands and wideband response. The main feed arm of spiral antenna is configured as rectangular monopole of width quarter wavelength to achieve impedance matching with standard 50 Ω excitation. Frequency tuning in the design is achieved by placing varactor diode at an appropriate position along the spiral arms and in the ground plane. The design offers a peak gain of 3.4 dB (simulated) and 3 dB (measured). The unique frequency response of antenna makes its suitable to be used for front-end system of cognitive radio for sensing the spectrum in various modes.

Sign in / Sign up

Export Citation Format

Share Document