scholarly journals A CPW - Fed Octagonal Ring Shaped Wide Band Antenna for Wireless Applications

2018 ◽  
Vol 7 (3) ◽  
pp. 87-92 ◽  
Author(s):  
P. Khanna ◽  
A. Sharma ◽  
A. K. Singh ◽  
A. Kumar
Keyword(s):  
Microstrip Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Wide Band ◽  
Impedance Bandwidth ◽  
Wireless Applications ◽  
High Frequency Structure Simulator ◽  
High Impedance ◽  
Ring Antenna ◽  
Operating Bandwidth

A CPW – Fed octagonal ring shaped antenna for wideband operation is presented. The radiating patch of proposed octagonal ring antenna consists of symmetrical slot in place of conventional annular ring microstrip antenna. The ground plane consists of two rectangular slots, while the radiator and the ground plane are on same plane that utilizes the space available around the radiator. The proposed antenna is simulated through Ansoft’s High Frequency Structure Simulator (HFSS). Measured result shows balanced agreement with the simulated results. The prototype is taken with dimensions 47 mm × 47 mm × 1.6 mm that achieves good return loss, constant group delay and good radiation patterns over the entire operating bandwidth of 2.0 to 9.5 GHz (7.5 GHz). The proposed antenna achieves high impedance bandwidth of 130%. Thus, the proposed antenna is applicable for S and C band applications.

scholarly journals Miniaturized Wideband Microstrip Antenna for Recent Wireless Applications

2018 ◽  
Vol 7 (5) ◽  
pp. 7-13 ◽  
Author(s):  
S. A. Shandal ◽  
Y. S. Mezaal ◽  
M. F. Mosleh ◽  
M. A. Kadim
Keyword(s):  
Microstrip Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Wide Frequency Range ◽  
Impedance Bandwidth ◽  
Wireless Devices ◽  
Microstrip Resonator ◽  
Resonant Frequencies ◽  
Compact Antenna ◽  
Wireless Applications

In this paper, a pentagon slot inside fractal circular patch microstrip resonator to design compact antenna over partial ground plane is introduced using 3rd iteration of adopted fractal geometry. This antenna is modeled on FR4 substrate with a size of (20 x 18) mm2, thickness of 1.5mm, permittivity of 4.3 and loss tangent of 0.02. The used type of feeding is microstrip line feed. It is designed to operate at wide frequency range of (4.5-9.3) GHz at resonant frequencies of 5.7GHz and 7.9GHz with impedance bandwidth of 4.8 GHz. Both lengths of ground plane Lg and width of feed line Wf are optimized in order to acquire optimum bandwidth. The simulated return loss values are -33 and -41 dB at two resonant frequencies of 5.7 and 7.9 GHz with gain of 3.2 dB. The simulated results offered noteworthy compatibility with measured results. Also, the proposed wideband microstrip antenna has substantial compactness that can be integrated within numerous wireless devices and systems.

Multi-Edged Wide-Band Rectangular Microstrip Fractal Antenna Array for C- and X-Band Wireless Applications

2016 ◽  
Vol 26 (04) ◽  
pp. 1750068 ◽  
Author(s):  
Jaspal Singh Khinda ◽  
Malay Ranjan Tripathy ◽  
Deepak Gambhir
Keyword(s):  
Return Loss ◽  
Low Cost ◽  
Ground Plane ◽  
Wide Band ◽  
Impedance Bandwidth ◽  
Network Analyzer ◽  
Fractal Antenna ◽  
Wireless Applications ◽  
X Band ◽  
Wide Range

A low-cost multi-edged rectangular microstrip fractal antenna (RMFA) yielding a huge bandwidth of 8.62[Formula: see text]GHz has been proposed in this paper. The proposed fractal antenna design constitutes a radiation patch, fed with 50[Formula: see text][Formula: see text] microstrip line and a partial ground plane. The partial ground plane is the combination of shapes of rectangle and three-point arc. The proposed antenna is simulated as well as fabricated. The simulated results using electromagnetic solver software and measured with vector network analyzer bench MS46322A are presented and compared. The various parameters such as return loss, voltage standing wave ratio (VSWR), antenna impedance, gain, directivity, group delay and phase of [Formula: see text], radiation efficiency and patterns are presented here. The depth of return loss is improved for a wide range of frequencies. The proposed fractal antenna is further extended to linear array to improve the gain and impedance bandwidth. The simulated and measured results prove the superiority of the proposed antenna.

scholarly journals New Compact Wideband Microstrip Antenna for Wireless Applications

2018 ◽  
Vol 7 (4) ◽  
pp. 85-92 ◽  
Author(s):  
S. Shandal ◽  
Y. S. Mezaal ◽  
M. Kadim ◽  
M. Mosleh
Keyword(s):  
Microstrip Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Computer Applications ◽  
Impedance Bandwidth ◽  
Substrate Thickness ◽  
Resonant Frequencies ◽  
Wireless Applications ◽  
Rectangular Patch ◽  
Rectangular Microstrip Antenna

In this paper, a miniature rectangular microstrip antenna over partial ground plane is presented by utilizing a space-filling property of fractal geometry in this design. It is simulated by High Frequency Software Simulator (HFSS) software, fabricated and tested by Vector Network Analyzer (VNA).Two types of slots are introduced in order to enhance antenna parameters such as bandwidth and return loss S1.1. This antenna is fabricated on FR4 substrate with a small size of (18 x 16 x 1.5) mm3, 1.5mm substrate thickness, 4.3 permittivity and 0.02 loss tangent. To feed this antenna,  microstrip line feed is used. This antenna is implemented for wide bandwidth (4.8-11.6) GHz, and has three resonant frequencies at 5.5GHz, 8.3GHz and 10.7GHz with impedance bandwidth of 6.8GHz. The gap value g between partial ground plane and rectangular patch at top layer is optimized in order to achieve optimal simulated return loss S1.1 is (-46,-32,-14) dB at three resonant frequencies (5.5, 8.3, 10.7) GHz and optimal radiation efficiency of 93.42% with gain of 3.63dB. The simulated results have tolerable agreement with measured results. This antenna is suitable for wireless computer applications within  C and X band  communications.

scholarly journals Design of CPW-Fed Antenna with Defected Substrate for Wideband Applications

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Amar Sharma ◽  
Puneet Khanna ◽  
Kshitij Shinghal ◽  
Arun Kumar
Keyword(s):  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Group Delay ◽  
Ground Plane ◽  
Impedance Bandwidth ◽  
Radiation Characteristics ◽  
High Frequency Structure Simulator ◽  
X Band ◽  
Good Agreement

A CPW-fed defected substrate microstrip antenna is proposed. The proposed antenna shows wideband applications by choosing suitable defected crown shaped substrate. Defected substrate also reduces the size of an antenna. The radiating patch of proposed antenna is taken in the form of extended U-shape. The space around the radiator is utilized by extending the ground plane on both sides of radiator. Simulation of proposed antenna is done on Ansoft’s High Frequency Structure Simulator (HFSS v. 14). Measured results are in good agreement with simulated results. The prototype is taken with dimensions 36 mm × 42 mm × 1.6 mm that achieves good return loss, constant group delay, and good radiation characteristics within the entire operating band from 4.5 to 13.5 GHz (9.0 GHz) with 100% impedance bandwidth at 9.0 GHz centre frequency. Thus, the proposed antenna is applicable for C and X band applications.

scholarly journals Band notched self complementaryultra wideband antenna for wireless applications

2018 ◽  
Vol 7 (2.8) ◽  
pp. 529 ◽  
Author(s):  
Ch Ramakrishna ◽  
G A.E.Satish Kumar ◽  
P Chandra Sekhar Reddy
Keyword(s):  
High Frequency ◽  
Return Loss ◽  
Wide Band ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Relative Dielectric Permittivity ◽  
Frequency Range ◽  
Ground Structure ◽  
Wireless Applications ◽  
Patch Edge

This paper presents a band notched WLAN self complementaryultra wide band antenna for wireless applications. The proposed antenna encounters a return loss (RL) less than -10dB for entire ultra wideband frequency range except band notched frequency. This paper proposes a hexagon shape patch, edge feeding, self complementary technique and defective ground structure. The antenna has an overall dimensionof 28.3mm × 40mm × 2mm, builton  substrate FR4 with a relative dielectric permittivity 4.4. And framework is simulated finite element method with help of high frequency structured simulator HFSSv17.2.the proposed antenna achieves a impedance bandwidth of 8.6GHz,  band rejected WLAN frequency range 5.6-6.5 GHz with  vswr is less than 2.

scholarly journals Ultra Wide Band Antenna with Defected Ground Plane and Microstrip Line Fed for Wi-Fi/Wi-Max/DCS/5G/Satellite Communications

2020 ◽  
Author(s):  
Ashish Singh ◽  
Krishnananda Shet ◽  
Durga Prasad
Keyword(s):  
Radiation Pattern ◽  
Satellite Communication ◽  
Ground Plane ◽  
Wide Band ◽  
Satellite Communications ◽  
Ultra Wide Band ◽  
Wireless Applications ◽  
Directional Radiation ◽  
Ring Antenna ◽  
Theoretical Results

In this chapter, ultra wide band angular ring antenna has been proposed for wireless applications. It has been observed that antenna resonate from 2.9 to 13.1 GHz which has 10.2 GHz bandwidth. Further, it is observed that antenna has nearly omni-directional radiation pattern for E and H-plane at 3.5, 5.8, and 8.5 GHz. The theoretical analysis of the proposed has been done using circuit theory analysis. It was also found using simulation that antenna has good input and output response of 0.2 ns. Proposed antenna measured, simulated, and theoretical results matches for antenna characteristics, i.e., reflection coefficient and radiation pattern. Bandwidth of antenna lies between 2.9 and 13.1 GHz, so this antenna is suitable for Wi-Fi, Wi-Max, digital communication system (DCS), satellite communication, and 5G applications.

scholarly journals Implications of Metamaterial on Ultra-Wide Band Microstrip Antenna Performance

Crystals ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 677
Author(s):  
Elham A. Serria ◽  
Mousa I. Hussein
Keyword(s):  
Microstrip Antenna ◽  
Return Loss ◽  
Ring Resonator ◽  
Ground Plane ◽  
Wide Band ◽  
Ring Resonators ◽  
Ultra Wide Band ◽  
Antenna Performance ◽  
Loss Maximum ◽  
Good Agreement

This study is addressing the slotted ring resonator effect on the performance of the ultra-wide band (UWB) microstrip antenna. Two types of metamaterial with double slotted ring resonators (SRR), circular (C-SRR) and square (S-SRR), are studied and implemented on back of the antenna. The design examines the effect of the number of the SRR and its position with respect to the antenna’s ground plane and the rotation of the inner and outer C-SRR rings on different antenna characteristics. The dimensions of the antenna are 45 mm × 31 mm × 1.27 mm. The implementation of the SRR increased the antenna bandwidth to cover the range from 2.2 GHz to 9.8 GHz with rejected bands and frequencies. Antenna simulated characteristics like return loss, maximum gain and radiation pattern are obtained utilizing HFSS. The return loss measurement and the VSWR of the antenna with all SRR configuration studied are in good agreement with simulated results.

scholarly journals Performance Analysis of a Defected Ground-Structured Antenna Loaded with Stub-Slot for 5G Communication

Sensors ◽  
2019 ◽  
Vol 19 (11) ◽  
pp. 2634 ◽  
Author(s):  
Md Mushfiqur Rahman ◽  
Md Shabiul Islam ◽  
Hin Yong Wong ◽  
Touhidul Alam ◽  
Mohammad Tariqul Islam
Keyword(s):  
Ground Plane ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Electronic Band ◽  
Band Frequency ◽  
Antenna Structure ◽  
Wireless Applications ◽  
High Impedance ◽  
Electronic Band Gap ◽  
Good Agreement

In this paper, a defected ground-structured antenna with a stub-slot configuration is proposed for future 5G wireless applications. A simple stub-slot configuration is used in the patch antenna to get the dual band frequency response in the 5G mid-band and the upper unlicensed frequency region. Further, a 2-D double period Electronic band gap (EBG) structure has been implemented as a defect in the metallic ground plane to get a wider impedance bandwidth. The size of the slots and their positions are optimized to get a considerably high impedance bandwidth of 12.49% and 4.49% at a passband frequency of 3.532 GHz and 6.835 GHz, respectively. The simulated and measured realized gain and reflection coefficients are in good agreement for both operating bandwidths. The overall antenna structure size is 33.5 mm × 33.5 mm. The antenna is fabricated and compared with experimental results. The proposed antenna shows a stable radiation pattern and high realized gain with wide impedance bandwidth using the EBG structure, which are necessary for the requirements of IoT applications offered by 5G technology.

scholarly journals Design of Transparent Antenna for 5G Wireless Applications

Proceedings ◽  
2020 ◽  
Vol 63 (1) ◽  
pp. 54
Author(s):  
Sanae Azizi ◽  
Laurent Canale ◽  
Saida Ahyoud ◽  
Georges Zissis ◽  
Adel Asselman
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Antenna Design ◽  
Impedance Bandwidth ◽  
Light Weight ◽  
Frequency Bandwidth ◽  
Frequency Range ◽  
Wireless Applications ◽  
Compact Size

This paper presents the design of a compact size band patch antenna for 5G wireless communications. This wideband antenna was designed on a glass substrate (12 × 11 × 2 mm3) and is optically transparent and compact. It consists of a radiation patch and a ground plane using AgHT-8 material. The antenna design comprises rectangular shaped branches optimized to attain the wideband characteristics. The calculated impedance bandwidth is 7.7% covering the frequency range of 25 to 27 GHz. A prototype of the antenna and various parameters such as return loss plot, gain plot, radiation pattern plot, and voltage standing wave ratio (VSWR) are presented and discussed. The simulated results of this antenna show that it is well suited for future 5G applications because of its transparency, flexibility, light weight, and wide achievable frequency bandwidth near the millimeter wave frequency band.

scholarly journals Design and Research of Miniaturized Micro Strip Slot with and without Defected Ground Structure

2019 ◽  
Vol 8 (2S11) ◽  
pp. 391-398 ◽  
Keyword(s):  
Microstrip Antenna ◽  
Communication Systems ◽  
Return Loss ◽  
Ground Plane ◽  
Broad Band ◽  
Wide Band ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Multiband Antennas ◽  
Microstrip Feed

In this paper, a compact microstrip patch has a slot associated with the Defected Ground Structure radiator is presented. Instead of semi-infinite ground plane, the proposed antenna adopts the defected ground plane. The Radiating patch mendacity on the FR-4 substrate which is having dielectric constant of 4.4, thereby provides good bandwidth. This microstrip antenna is designed for wide bandwidth applications in range of 5.5GHz to 7.25GHz. Proposed work introduces a methodology wherein reducing of structure’s increase the bandwidth as well as return loss with defected ground structure (DGS).However since communication systems require small size, broad band and multiband antennas, monopoles have to be ensued for fabricating broad-band and wide-band antennas. In the proposed work investigations are carried out to design a new antenna with broad-band properties. Simulations are carried out via An soft HFSS electromagnetic simulator software- fabricated on FR-4 Substrate and tested with Vector network Analyzer. Measurement and Simulation results obtained prove the applicability of proposed antenna in 5.5GHz to 7.25GHz frequency range with a return loss of -31.3dB and 11.5dB etc. Microstrip feed line technique is used to feed the antenna with 50Ω impedance.

Sign in / Sign up

Export Citation Format

Share Document