scholarly journals Palatal mucosa thickness and palatal neurovascular bundle position evaluation by cone-beam computed tomography—retrospective study on relationships with palatal vault anatomy

PeerJ ◽  
2021 ◽  
Vol 9 ◽  
pp. e12699
Author(s):  
Ilkim Karadag ◽  
Hasan Guney Yilmaz
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Inverse Correlation ◽  
Neurovascular Bundle ◽  
Cone Beam ◽  
Maximum Width ◽  
Second Molar ◽  
Mucosal Thickness ◽  
The Difference ◽  
Palatal Mucosa

Background Measuring the thickness of the palatal mucosa at the planning of the surgical procedure is an important step in order to obtain the maximum width and thickness of the graft from the appropriate area. The aim of this study is to determine whether there is a relationship between palatal angle (PA) or palatal depth (PD) and palatal mucosa thickness (PMT) or palatal neurovascular bundle distance (PNBD). Methods PMT, PNBD, PD and PA were measured on cone-beam computed tomography (CBCT) images of maxillary posterior region of 200 male and 200 female patients. The mean of all parameters according to gender was compared and the significance of the difference detected between groups was evaluated. Potential relationship between PMT or PNBD and PA or PD was also evaluated. Results In females, the palatal mucosa was significantly thinner at all tooth regions (p < 0.005), and PNBD was lower only at the level of the second molar (p < 0.001). In addition, it was found that there was a significant inverse correlation between the palatal depth value and the palatal mucosal thickness, and palatal depth was correlated with the palatal neurovascular bundle distance (p ≤ 0.001). Discussion Consistent with previous studies, it was observed that the thickest mucosa in the palatal region was located in the region of the premolar teeth, and women had thinner palatal mucosa. In addition, in patients with a deeper palate vault, the palatal mucosa was thinner, but the palatal neurovascular bundle was more distant from the cemento-enamel junction.

scholarly journals Tomographic mapping of buccal shelf area for optimum placement of bone screws: A three-dimensional cone-beam computed tomography evaluation

2019 ◽  
Vol 9 ◽  
pp. 241-245
Author(s):  
Neeraj Eknath Kolge ◽  
Vivek J. Patni ◽  
Sheetal S. Potnis
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Bone Screws ◽  
Neurovascular Bundle ◽  
Cone Beam ◽  
Shelf Area ◽  
Bone Screw ◽  
Second Molar ◽  
Bone Width ◽  
Mandibular Second Molar

Introduction: Buccal shelf bone screws have become increasingly popular as a preferred method of skeletal anchorage in the mandibular arch. Anatomic variations and clinical experience suggest that width and slope of the bone at buccal shelf vary in different population groups, with some individual variations. Aims and Objectives: The objective of this study was to evaluate angulation of the bone screw of mandibular buccal shelf area, total bone width, thickness of the cortical bone, and proximity to neurovascular structures. Materials and Methods: Cone-beam computed tomography scans were used to obtain measurements of the buccal shelf region of 35 patients (18 females, 17 males; mean age, 23.6 years). Measurements were taken at three locations (L1, L2, and L3) and total bone width was measured at two levels from the cementoenamel junction (CEJ, H1 and H2). Bone screws were virtually placed and their proximity evaluated from digitally traced inferior alveolar neurovascular bundle. Results: Permissible angulation for placement of buccal shelf bone screw considering the safety distance from the root and avoiding excessive buccal projection to minimize cheek irritation was found to be 74.48 (SD ± 4.26). Total bone width was maximum at the distobuccal cusp of mandibular second molar (L3H2; 6.40 ± 1.35) when measured at the level of 8 mm from the CEJ. Bone screws were well within the safety range from causing any iatrogenic damage to the inferior alveolar neurovascular bundle at all the three aforementioned locations. Conclusion: Thus, area buccal to the mandibular second molar region seems to be the most favorable site for placement of buccal shelf bone screws in Indian patients.

scholarly journals Mandibular Buccal Bone Thickness In Southeastern Anatolian People: A Cone-Beam Computed Tomography Study

2017 ◽  
Vol 7 (1) ◽  
pp. 6 ◽  
Author(s):  
Ceren Aktuna Belgin ◽  
Ozkan Adiguzel ◽  
Marius Bud ◽  
Mehmet Colak ◽  
Zeki Akkus
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Age Groups ◽  
Cone Beam ◽  
Bone Thickness ◽  
Posterior Teeth ◽  
Second Molar ◽  
Significant Difference ◽  
Molar Teeth ◽  
The Difference

Aim: Buccal bone thickness is an important factor in implant treatment, bone health after tooth extraction, apical surgery, and esthetic outcomes. We evaluated the distance from the mandibular premolar and molar teeth apices to the buccal cortical bone in southeastern Anatolian people using cone-beam computed tomography (CBCT). Methodology: This retrospective study was performed in 461 posterior teeth (220 premolars, 241 molars) of 133 patients (62 females, 64 males) at Dicle University, Faculty of Dentistry, Department of Oral and Maxillofacial Radiology. Data were analyzed using Student’s t-tests and Tukey HSD tests. Results: The mandibular buccal bone was thicker in men than in women, but the difference was not statistically significant (p>0.05). The thinnest point of the mandibular buccal bone was measured in women as 2.431 mm and in men as 2.491 mm in the first premolar teeth. The thickest point of the mandibular bone was measured in women as 7.940 mm and in men as 7.859 mm in the distal roots of mandibular second molar teeth. For the mandibular first and second premolars, there was no significant difference in buccal bone thickness among the 10–29-, 30–49-, and 50–69-year age groups. The difference between the first and second molar mesial and distal roots of the age groups was significant at the level of buccal root thickness (p<0.05). Conclusions: It is important to examine buccal bone thickness (with CBCT) before surgical dental procedures for appropriate implant planning and surgical endodontic treatment.  How to cite this article: Aktuna Belgin C, Adiguzel O, Bud M, Colak M, Akkus Z. Mandibular Buccal Bone Thickness In Southeastern Anatolian People: A Cone-Beam Computed Tomography Study. Int Dent Res 2017;7:6-12. Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.

scholarly journals Variations in vertical mucosal thickness at edentulous ridge according to site and gender measured by cone-beam computed tomography

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Motohiro Munakata ◽  
Koudai Nagata ◽  
Minoru Sanda ◽  
Ryota Kawamata ◽  
Daisuke Sato ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Treatment Plan ◽  
Cone Beam ◽  
Alveolar Ridge ◽  
Marginal Bone Loss ◽  
Mandibular Molar ◽  
Mucosal Thickness ◽  
And Gender ◽  
Edentulous Patients

Abstract Background The vertical thickness of the peri-implant mucosa is associated with the amount of post treatment marginal bone loss. However, the variations in mucosal thickness at the different edentulous sites have been sparsely documented. The purpose of the study was to conduct a survey of the frequency distribution of variations in mucosal thickness at the different sites of the edentulous alveolar ridge and to compare them according to gender. Our study included 125 partially edentulous patients having a total of 296 implant sites. Cone-beam computed tomography (CBCT) scans were obtained by placing a diagnostic template with a radiopaque crown indicator on the ridge to determine the mucosal thickness at the crest of the alveolar ridge. Results The mucosal thickness was 3.0±1.3 mm in the maxilla, which was significantly greater than the mucosal thickness of 2.0±1.0 mm in the mandible (p<0.001). In both the maxilla and the mandible, the mucosa was the thickest in the anterior region, followed by the premolar and molar regions. Sites were further classified into two groups based on whether the mucosal thickness was greater than 2 mm. In the mandible, more than half of the sites showed a mucosal thickness of 2 mm or less. Conclusions Although this study was a limited preoperative study, the vertical mucosal thickness at the edentulous ridge differed between the maxillary and mandibular regions. The majority of sites in the mandibular molar region had a mucosal thickness of less than 2 mm. Practitioners might be able to develop an optimal dental implant treatment plan for long-term biologic and esthetic stability by considering these factors.

scholarly journals A C-Shaped Canal in a Maxillary Second Molar: Prexion 3D Cone-Beam Computed Tomography Analysis

2016 ◽  
Vol 50 (4) ◽  
pp. 354-358
Author(s):  
Daniela Siqueira Lopes ◽  
Andréa Cruz Câmara ◽  
Carlos Menezes Aguiar ◽  
Monikelly do Carmo Chagas do Nascimento ◽  
Luciane Farias de Araújo
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Second Molar ◽  
Tomography Analysis

scholarly journals Frequency and Severity of Second Molar External Root Resorption Due to the Adjacent Third Molar and Related Factors: A Cone-Beam Computed Tomography Study

2021 ◽  
Author(s):  
Shirin Sakhdari ◽  
Sara Farahani ◽  
Ehsan Asnaashari ◽  
Sahel Marjani
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Resorption ◽  
Third Molar ◽  
Cone Beam ◽  
Radiology Department ◽  
Third Molars ◽  
Related Factors ◽  
Second Molar ◽  
External Root Resorption

Objective: This study sought to assess the frequency and severity of second molar external root resorption (ERR) due to the adjacent third molar and its correlation with the position of third molar and other related factors using cone-beam computed tomography (CBCT). Materials and Methods: This cross-sectional study evaluated 320 second molars and their adjacent impacted third molars on CBCT scans of patients over 16 years, retrieved from the archives of Azad University Radiology Department. Presence/absence of second molar ERR, its location and severity (if present), and position of adjacent third molar were determined on CBCT scans, and recorded in a checklist. Data were analyzed using a logistic regression model. Results: The frequency of second molar ERR was 33.4% in the mandible and 14% in the maxilla. The severity of ERR was significantly correlated with the involved jaw (P=0.001) but had no correlation with age, gender, or depth of impaction of adjacent third molar (P>0.05). The mesioangular and horizontal positions of impacted third molars had a significant correlation with the frequency of second molar ERR (P<0.006). Conclusion: According to the results of this study, ERR occurring in second molars adjacent to third molars is common, especially in the mandible. Mesially inclined third molars have a greater potential of being associated with ERR in second molars.

scholarly journals Evaluation of the root and canal morphology of mandibular permanent molars in a south-eastern Turkish population using cone-beam computed tomography

2014 ◽  
Vol 08 (02) ◽  
pp. 154-159 ◽  
Author(s):  
Bilge Gulsum Nur ◽  
Evren Ok ◽  
Mustafa Altunsoy ◽  
Osman Sami Aglarci ◽  
Mehmet Colak ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Turkish Population ◽  
Cone Beam ◽  
Type I ◽  
Second Molar ◽  
Mandibular Molars ◽  
Permanent Molars ◽  
Canal Morphology

ABSTRACT Objective: The aim of this retrospective study was to determine the root and canal morphology of the mandibular first and second permanent molars in a Turkish population using cone-beam computed tomography (CBCT). Materials and Methods: CBCT images of mandibular first (n = 966) and second molar (n = 1165) teeth from 850 Turkish patients were evaluated. The root canal configurations were classified according to the method of Vertucci. The data were analyzed by Pearson's Chi-square test. Results: The majority of mandibular molars were two rooted with three canals; however, three roots were identified in 0.05% of the first molars and 0.01% of the second molars, and 100% of the additional root canals were of type I configuration. Mesial roots had more complex canal systems with more than one canal, whereas most distal roots had a type I configuration. Conclusions: Within the limitations of this study, it can be concluded that CBCT scanning provides supplemental information about the root canal configurations of mandibular molars in a Turkish population. This study may help clinicians in the root canal treatment of mandibular molars.

scholarly journals Evaluation of the Root and Canal Morphology of Maxillary Permanent Molars and the Incidence of the Second Mesiobuccal Root Canal in Greek Population Using Cone-beam Computed Tomography

2015 ◽  
Vol 9 (1) ◽  
pp. 267-272 ◽  
Author(s):  
Georgia E. Nikoloudaki ◽  
Taxiarchis G. Kontogiannis ◽  
Nikolaos P. Kerezoudis
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Greek Population ◽  
Root Canal Treatment ◽  
Cone Beam ◽  
Second Molar ◽  
Root Canals ◽  
Permanent Molars ◽  
Canal Morphology

Objectives: Cone-Beam Computed Tomography is an alternative imaging technique which has been recently introduced in the field of Oral &amp; Maxillofacial Radiology. It has rapidly gained great popularity among clinicians due to its ability to detect lesions and defects of the orofacial region and provide three-dimensional information about them. In the field of Endodontics, CBCT can be a useful tool to reveal tooth morphology irregularities, additional root canals and vertical root fractures. The objective of this study is to evaluate the root and root canal morphology of the maxillary permanent molars in Greek population using Cone-Beam Computed Tomography.Materials and Methods:273 cone-beam computed tomography (CBCT) images were examined. The number of roots and root canals of the first and second maxillary molars were evaluated. Root canal configuration was classified according to Weine’s classification by two independent examiners and statistical analysis was performed.Results:A total of 812 molars (410 first and 402 second ones) were evaluated. The vast majority of both first and second molars had three roots (89.26% and 85.07%, respectively). Most first molars had four canals, while most second molars had three. In the mesiobuccal roots, one foramen was recorded in 80.91% of all teeth. Other rare morphologic variations were also found, such as fusion of a maxillary second molar with a supernumerary tooth.Conclusion:Within the limitations of this study, it can be concluded that more attention should be given to the detection of additional canals during root canal treatment in maxillary permanent molars. Towards this effort, CBCT can provide the clinician with supplemental information about the different root canal configurations for successful Root Canal Treatment.

scholarly journals Relationship between maxillary posterior molar roots and the maxillary sinus floor: Cone-beam computed tomography analysis of a western Chinese population

2020 ◽  
Vol 48 (6) ◽  
pp. 030006052092689
Author(s):  
Jun Pei ◽  
Jiyuan Liu ◽  
Yafei Chen ◽  
Yuanyuan Liu ◽  
Xuejuan Liao ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Maxillary Sinus ◽  
Cone Beam Computed Tomography ◽  
Chinese Population ◽  
Root Apex ◽  
Western China ◽  
Cone Beam ◽  
Posterior Teeth ◽  
Second Molar ◽  
Maxillary Molar

Objective This study aimed to assess the positional relationships between the maxillary sinus and the first and second molars in a western Chinese population by using cone-beam computed tomography. Methods This study included 212 patients (652 maxillary molars and 1956 roots). Patient demographics (sex and age) and cone-beam computed tomography data regarding the relationship between molar roots and the maxillary sinus were obtained. This relationship was stratified into four types for statistical analysis. Results Sex and side did not significantly influence the distance between maxillary molar roots and the maxillary sinus. However, the distance between maxillary molar roots and the maxillary sinus increased with age. The mesiobuccal root of the second molar was nearest to the maxillary sinus. The most common relationship type involved absence of root contact with the sinus border and presence of a maxillary sinus cross-section above the root apex. Conclusions Compared with other teeth, the maxillary posterior teeth have a complex anatomical structure and are closely related to the sinus. These findings may serve as reference information for root canal treatment, tooth extraction, dental implant, and other dental clinical procedures among patients in western China.

scholarly journals Comparative Evaluation of Cortical Bone Anatomy of Mandibular Buccal Shelf for Mini Implant Placement in Different Facial Divergence: A Cone Beam Computed Tomography Study

2020 ◽  
Vol 54 (4) ◽  
pp. 325-331
Author(s):  
Kalyani Trivedi ◽  
Bharvi K Jani ◽  
Sagar Hirani ◽  
Mansi V Radia
Keyword(s):  
Computed Tomography ◽  
Cortical Bone ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Bone Surface ◽  
Bone Thickness ◽  
Second Molar ◽  
Cortical Bone Thickness ◽  
Implant Placement ◽  
Alveolar Crest

Aim: The purpose of this study was to use measurements from cone beam computed tomography scans to quantify the cortical bone thickness of mandibular buccal shelf region and preferable site for buccal shelf implant placement in 10 hyperdivergent and 10 hypodivergent patients. Method: 20 cone beam computed tomographies were equally divided based on divergence. 6 sites were examined: mesial of first molar (6M), middle of first molar (6Mi), interdental between the first and second molar (Id), mesial of second molar (7M), middle of second molar (7Mi), and distal of second molar (7D). The study quantified the mandibular buccal shelf relative to its angle of slope, the cortical bone thickness measured perpendicular to the bone surface, the amount of cortical bone 30° angle to the bone surface. The cortical bone thickness was measured perpendicular and at a 30° angle at 3, 5, and 7 mm from the alveolar crest. Result: Significant change is seen at the buccal shelf slope at 6M ( P = .001) and further increase in this angle till 7D ( P = .003). Mean amount of cortical bone for hyperdivergent group at 7D is 4.77 ± 0.68 mm and for hypodivergent group is 3.86 ± 0.70 mm. Statistically significant differences were noted at insertion site at 90° and 30° for both groups at 3, 5, and 7 mm from the alveolar crest. Conclusion: Preferable site for buccal shelf implant placement is distal to the mandibular second molar. The maximum amount of cortical bone is found distal to the second molar 7 mm vertically from alveolar crest when the buccal shelf implant is placed at 30° angulation for hyperdivergent group.

Sign in / Sign up

Export Citation Format

Share Document