scholarly journals Estimation of maize above-ground biomass based on stem-leaf separation strategy integrated with LiDAR and optical remote sensing data

PeerJ ◽  
2019 ◽  
Vol 7 ◽  
pp. e7593 ◽  
Author(s):  
Yaohui Zhu ◽  
Chunjiang Zhao ◽  
Hao Yang ◽  
Guijun Yang ◽  
Liang Han ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Lidar Data ◽  
Optical Remote Sensing ◽  
Mean Square ◽  
Above Ground Biomass ◽  
Multispectral Data ◽  
Separation Strategy ◽  
Stem Leaf

Above-ground biomass (AGB) is an important indicator for effectively assessing crop growth and yield and, in addition, is an important ecological indicator for assessing the efficiency with which crops use light and store carbon in ecosystems. However, most existing methods using optical remote sensing to estimate AGB cannot observe structures below the maize canopy, which may lead to poor estimation accuracy. This paper proposes to use the stem-leaf separation strategy integrated with unmanned aerial vehicle LiDAR and multispectral image data to estimate the AGB in maize. First, the correlation matrix was used to screen optimal the LiDAR structural parameters (LSPs) and the spectral vegetation indices (SVIs). According to the screened indicators, the SVIs and the LSPs were subjected to multivariable linear regression (MLR) with the above-ground leaf biomass (AGLB) and above-ground stem biomass (AGSB), respectively. At the same time, all SVIs derived from multispectral data and all LSPs derived from LiDAR data were subjected to partial least squares regression (PLSR) with the AGLB and AGSB, respectively. Finally, the AGB was computed by adding the AGLB and the AGSB, and each was estimated by using the MLR and the PLSR methods, respectively. The results indicate a strong correlation between the estimated and field-observed AGB using the MLR method (R2 = 0.82, RMSE = 79.80 g/m2, NRMSE = 11.12%) and the PLSR method (R2 = 0.86, RMSE = 72.28 g/m2, NRMSE = 10.07%). The results indicate that PLSR more accurately estimates AGB than MLR, with R2 increasing by 0.04, root mean square error (RMSE) decreasing by 7.52 g/m2, and normalized root mean square error (NRMSE) decreasing by 1.05%. In addition, the AGB is more accurately estimated by combining LiDAR with multispectral data than LiDAR and multispectral data alone, with R2 increasing by 0.13 and 0.30, respectively, RMSE decreasing by 22.89 and 54.92 g/m2, respectively, and NRMSE decreasing by 4.46% and 7.65%, respectively. This study improves the prediction accuracy of AGB and provides a new guideline for monitoring based on the fusion of multispectral and LiDAR data.

scholarly journals Estimation of Apple Flowering Frost Loss for Fruit Yield Based on Gridded Meteorological and Remote Sensing Data in Luochuan, Shaanxi Province, China

2021 ◽  
Vol 13 (9) ◽  
pp. 1630
Author(s):  
Yaohui Zhu ◽  
Guijun Yang ◽  
Hao Yang ◽  
Fa Zhao ◽  
Shaoyu Han ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Minimum Temperature ◽  
Price Regulation ◽  
Flowering Period ◽  
Mean Square ◽  
Prevention Measures ◽  
Agricultural Insurance

With the increase in the frequency of extreme weather events in recent years, apple growing areas in the Loess Plateau frequently encounter frost during flowering. Accurately assessing the frost loss in orchards during the flowering period is of great significance for optimizing disaster prevention measures, market apple price regulation, agricultural insurance, and government subsidy programs. The previous research on orchard frost disasters is mainly focused on early risk warning. Therefore, to effectively quantify orchard frost loss, this paper proposes a frost loss assessment model constructed using meteorological and remote sensing information and applies this model to the regional-scale assessment of orchard fruit loss after frost. As an example, this article examines a frost event that occurred during the apple flowering period in Luochuan County, Northwestern China, on 17 April 2020. A multivariable linear regression (MLR) model was constructed based on the orchard planting years, the number of flowering days, and the chill accumulation before frost, as well as the minimum temperature and daily temperature difference on the day of frost. Then, the model simulation accuracy was verified using the leave-one-out cross-validation (LOOCV) method, and the coefficient of determination (R2), the root mean square error (RMSE), and the normalized root mean square error (NRMSE) were 0.69, 18.76%, and 18.76%, respectively. Additionally, the extended Fourier amplitude sensitivity test (EFAST) method was used for the sensitivity analysis of the model parameters. The results show that the simulated apple orchard fruit number reduction ratio is highly sensitive to the minimum temperature on the day of frost, and the chill accumulation and planting years before the frost, with sensitivity values of ≥0.74, ≥0.25, and ≥0.15, respectively. This research can not only assist governments in optimizing traditional orchard frost prevention measures and market price regulation but can also provide a reference for agricultural insurance companies to formulate plans for compensation after frost.

scholarly journals Estimating Subsurface Thermohaline Structure of the Global Ocean Using Surface Remote Sensing Observations

2019 ◽  
Vol 11 (13) ◽  
pp. 1598 ◽  
Author(s):  
Hua Su ◽  
Xin Yang ◽  
Wenfang Lu ◽  
Xiao-Hai Yan
Keyword(s):  
Remote Sensing ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Estimation Error ◽  
Satellite Observations ◽  
The Other ◽  
Global Ocean ◽  
Gradient Boosting ◽  
Mean Square ◽  
Thermohaline Structure

Retrieving multi-temporal and large-scale thermohaline structure information of the interior of the global ocean based on surface satellite observations is important for understanding the complex and multidimensional dynamic processes within the ocean. This study proposes a new ensemble learning algorithm, extreme gradient boosting (XGBoost), for retrieving subsurface thermohaline anomalies, including the subsurface temperature anomaly (STA) and the subsurface salinity anomaly (SSA), in the upper 2000 m of the global ocean. The model combines surface satellite observations and in situ Argo data for estimation, and uses root-mean-square error (RMSE), normalized root-mean-square error (NRMSE), and R2 as accuracy evaluations. The results show that the proposed XGBoost model can easily retrieve subsurface thermohaline anomalies and outperforms the gradient boosting decision tree (GBDT) model. The XGBoost model had good performance with average R2 values of 0.69 and 0.54, and average NRMSE values of 0.035 and 0.042, for STA and SSA estimations, respectively. The thermohaline anomaly patterns presented obvious seasonal variation signals in the upper layers (the upper 500 m); however, these signals became weaker as the depth increased. The model performance fluctuated, with the best performance in October (autumn) for both STA and SSA, and the lowest accuracy occurred in January (winter) for STA and April (spring) for SSA. The STA estimation error mainly occurred in the El Niño-Southern Oscillation (ENSO) region in the upper ocean and the boundary of the ocean basins in the deeper ocean; meanwhile, the SSA estimation error presented a relatively even distribution. The wind speed anomalies, including the u and v components, contributed more to the XGBoost model for both STA and SSA estimations than the other surface parameters; however, its importance at deeper layers decreased and the contributions of the other parameters increased. This study provides an effective remote sensing technique for subsurface thermohaline estimations and further promotes long-term remote sensing reconstructions of internal ocean parameters.

scholarly journals Using Multi-Temporal MODIS NDVI Data to Monitor Tea Status and Forecast Yield: A Case Study at Tanuyen, Laichau, Vietnam

2020 ◽  
Vol 12 (11) ◽  
pp. 1814
Author(s):  
Phamchimai Phan ◽  
Nengcheng Chen ◽  
Lei Xu ◽  
Zeqiang Chen
Keyword(s):  
Remote Sensing ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Vegetation Index ◽  
Coefficient Of Determination ◽  
Percentage Error ◽  
Support Vector ◽  
Mean Square ◽  
Multi Temporal

Tea is a cash crop that improves the quality of life for people in the Tanuyen District of Laichau Province, Vietnam. Tea yield, however, has stagnated in recent years, due to changes in temperature, precipitation, the age of the tea bushes, and diseases. Developing an approach for monitoring tea bushes by remote sensing and Geographic Information Systems (GIS) might be a way to alleviate this problem. Using multi-temporal remote sensing data, the paper details an investigation of the changes in tea health and yield forecasting through the normalized difference vegetation index (NDVI). In this study, we used NDVI as a support tool to demonstrate the temporal and spatial changes in NDVI through the extract tea NDVI value and calculate the mean NDVI value. The results of the study showed that the minimum NDVI value was 0.42 during January 2013 and February 2015 and 2016. The maximum NDVI value was in August 2015 and June 2017. We indicate that the linear relationship between NDVI value and mean temperature was strong with R 2 = 0.79 Our results confirm that the combination of meteorological data and NDVI data can achieve a high performance of yield prediction. Three models to predict tea yield were conducted: support vector machine (SVM), random forest (RF), and the traditional linear regression model (TLRM). For period 2009 to 2018, the prediction tea yield by the RF model was the best with a R 2 = 0.73 , by SVM it was 0.66, and 0.57 with the TLRM. Three evaluation indicators were used to consider accuracy: the coefficient of determination ( R 2 ), root-mean-square error (RMSE), and percentage error of tea yield (PETY). The highest accuracy for the three models was in 2015 with a R 2 ≥ 0.87, RMSE < 50 kg/ha, and PETY less 3% error. In the other years, the prediction accuracy was higher in the SVM and RF models. Meanwhile, the RF algorithm was better than PETY (≤10%) and the root mean square error for this algorithm was significantly less (≤80 kg/ha). RMSE and PETY showed relatively good values in the TLRM model with a RMSE from 80 to 100 kg/ha and a PETY from 8 to 15%.

Application of Parallel Computing in Feature Point Extraction Processing of Remote Sensing Images

2014 ◽  
Vol 687-691 ◽  
pp. 3600-3603
Author(s):  
Xian Chen Xiao ◽  
Yu Min Chen ◽  
Jin Fang Yang
Keyword(s):  
Remote Sensing ◽  
Parallel Computing ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Feature Point ◽  
Mean Square ◽  
Computing Environment ◽  
Remote Sensing Images ◽  
Time Consumption ◽  
Feature Point Extraction

This study attempts to introduce parallel computing into processing of remote sensing images and discuss its influence on the processing results. We select an processing of remote sensing images called feature point extraction to run in parallel computing environment and calculate the time consumption and root-mean-square error, then give an analysis based on the result.

scholarly journals Phycocyanin Monitoring in Some Spanish Water Bodies with Sentinel-2 Imagery

Water ◽  
2021 ◽  
Vol 13 (20) ◽  
pp. 2866
Author(s):  
Rebeca Pérez-González ◽  
Xavier Sòria-Perpinyà ◽  
Juan Miguel Soria ◽  
Jesús Delegido ◽  
Patricia Urrego ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Water Bodies ◽  
World Health ◽  
Mean Square ◽  
Monitoring Method ◽  
And Control ◽  
Sentinel 2

Remote sensing is an appropriate tool for water management. It allows the study of some of the main sources of pollution, such as cyanobacterial harmful algal blooms. These species are increasing due to eutrophication and the adverse effects of climate change. This leads to water quality loss, which has a major impact on the environment, including human water supplies, which consequently require more expensive purification processes. The application of satellite remote sensing images as bio-optical tools is an effective way to monitor and control phycocyanin concentrations, which indicate the presence of cyanobacteria. For this study, 90 geo-referenced phycocyanin measurements were performed in situ, using a Turner C3 Submersible Fluorometer and a laboratory spectrofluorometer, both calibrated with phycocyanin standard, in water bodies of the Iberian Peninsula. These samples were synchronized with Sentinel-2 satellite orbit. The images were processed using Sentinel Application Program software and corrected with the Case 2 Regional Coast color-extended atmospheric correction tool. To produce algorithms that would help to obtain the phycocyanin concentration from the reflectance measured by the multispectral instrument sensor of the satellite, the following band combinations were tested, among others: band 665 nm, band 705 nm, and band 740 nm. The samples were equally divided: half were used for the algorithm’s calibration, and the other half for its validation. With the best adjustment, the algorithm was made more robust and accurate through a recalculation, obtaining a determination coefficient of 0.7, a Root Mean Square Error of 8.1 µg L−1, and a Relative Root Mean Square Error of 19%. In several reservoirs, we observed alarming phycocyanin concentrations that may trigger many environmental health problems, as established by the World Health Organization. Remote sensing provides a rapid monitoring method for the temporal and spatial distribution of these cyanobacteria blooms to ensure good preventive management and control, in order to improve the environmental quality of inland waters.

scholarly journals Modeling and Spatiotemporal Mapping of Water Quality through Remote Sensing Techniques: A Case Study of the Hassan Addakhil Dam

2021 ◽  
Vol 11 (19) ◽  
pp. 9297
Author(s):  
Anas El Ouali ◽  
Mohammed El Hafyani ◽  
Allal Roubil ◽  
Abderrahim Lahrach ◽  
Ali Essahlaoui ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Water Quality ◽  
Root Mean Square Error ◽  
Dissolved Oxygen ◽  
Mean Square Error ◽  
Chlorophyll A ◽  
Satellite Data ◽  
Mean Square ◽  
Spatiotemporal Mapping ◽  
Remote Sensing Techniques

With its high water potential, the Ziz basin is one of the most important basins in Morocco. This paper aims to develop a methodology for spatiotemporal monitoring of the water quality of the Hassan Addakhil dam using remote sensing techniques combined with a modeling approach. Firstly, several models were established for the different water quality parameters (nitrate, dissolved oxygen and chlorophyll a) by combining field and satellite data. In a second step, the calibration and validation of the selected models were performed based on the following statistical parameters: compliance index R2, the root mean square error and p-value. Finally, the satellite data were used to carry out spatiotemporal monitoring of the water quality. The field results show excellent quality for most of the samples. In terms of the modeling approach, the selected models for the three parameters (nitrate, dissolved oxygen and chlorophyll a) have shown a good correlation between the measured and estimated values with compliance index values of 0.62, 0.56 and 0.58 and root mean square error values of 0.16 mg/L, 0.65 mg/L and 0.07 µg/L for nitrate, dissolved oxygen and chlorophyll a, respectively. After the calibration, the validation and the selection of the models, the spatiotemporal variation of water quality was determined thanks to the multitemporal satellite data. The results show that this approach is an effective and valid methodology for the modeling and spatiotemporal mapping of water quality in the reservoir of the Hassan Addakhil dam. It can also provide valuable support for decision-makers in water quality monitoring as it can be applied to other regions with similar conditions.

scholarly journals A COMPARISON OF MACHINE LEARNING MODELS FOR SOIL SALINITY ESTIMATION USING MULTI-SPECTRAL EARTH OBSERVATION DATA

2021 ◽  
Vol V-3-2021 ◽  
pp. 257-263
Author(s):  
A. Zarei ◽  
M. Hasanlou ◽  
M. Mahdianpari
Keyword(s):  
Machine Learning ◽  
Remote Sensing ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Soil Salinity ◽  
Field Data ◽  
Observation Data ◽  
Mean Square ◽  
Sentinel 2

Abstract. Soil salinity, a significant environmental indicator, is considered one of the leading causes of land degradation, especially in arid and semi-arid regions. In many cases, this major threat leads to loss of arable land, reduces crop productivity, groundwater resources loss, increases economic costs for soil management, and ultimately increases the probability of soil erosion. Monitoring soil salinity distribution and degree of salinity and mapping the electrical conductivity (EC) using remote sensing techniques are crucial for land use management. Salt-effected soil is a predominant phenomenon in the Eshtehard Salt Lake located in Alborz, Iran. In this study, the potential of Sentinel-2 imagery was investigated for mapping and monitoring soil salinity. According to the satellite's pass, different salt properties were measured for 197 soil samples in the field data study. Therefore several spectral features, such as satellite band reflectance, salinity indices, and vegetation indices, were extracted from Sentinel-2 imagery. To build an optimum machine learning regression model for soil salinity estimation, three different regression models, including Gradient Boost Machine (GBM), Extreme Gradient Boost (XGBoost), and Random Forest (RF), were used. The XGBoostmethod outperformed GBM and RF with the coefficient of determination (R2) more than 76%, Root Mean Square Error (RMSE) about 0.84 dS m−1, and Normalized Root Mean Square Error (NRMSE) about 0.33 dS m−1. The results demonstrated that the integration of remote sensing data, field data, and using an appropriate machine learning model could provide high-precision salinity maps to monitor soil salinity as an environmental problem.

Sign in / Sign up

Export Citation Format

Share Document