scholarly journals Validated Stability – Indicating Methods for Determination of Sofosbuvir by UPLC and HPTLC in Pure Form and Tablet Dosage Forms

2019 ◽  
pp. 1-13
Author(s):  
Sawsan A. Abdel-Razeq ◽  
Zeinab Adel Nasr ◽  
Noha S. Said
Keyword(s):  
Liquid Chromatography ◽  
Thin Layer ◽  
High Performance ◽  
Good Accuracy ◽  
Degradation Products ◽  
Dosage Forms ◽  
Stability Indicating ◽  
Accuracy And Precision ◽  
Tablet Dosage

Aims: Two simple and sensitive stability- indicating methods were developed and validated for the quantitative determination of sofosbuvir in presence of its degradation products. Study Design: Ultra high performance liquid chromatography (UPLC), High performance thin layer chromatography (HPTLC) are developed for determination of sofosbuvir in presence of its degradation products, laboratory-prepared mixtures and in tablet dosage forms. Place and Duration of Study: Analytical Chemistry Department, Faculty of Pharmacy (Girls), Al-Azhar University, between August 2018 and March 2019. Methodology: Two simple and sensitive stability- indicating methods were developed and validated for the quantitative determination of Sofosbuvir in presence of its degradation products. The first method was an Ultra Performance Liquid Chromatography (UPLC) method, in which efficient separation was carried out on phenomenex kinetex 2.6 μm C18 100 A column using a mobile phase consisting of filtered and degassed mixture of 0.1% ortho-phosphoric acid in water and methanol with the ratio of (40:60% v/v) adjusted to pH 3.5, at a flow rate of 1 mL min-1 and UV detection at 260 nm at ambient temperature. The second method is a high performance- thin layer chromatographic one (HPTLC) in which chromatographic separation was performed on silica gel 60 F254 plates, with methanol – chloroform – ammonia (2.5: 6: 1.5 % v/v/v) as a developing system followed by densitometric determination at 261 nm. Sofosbuvir was subjected to stress conditions including alkaline, acidic and oxidative degradation. Results: Beer’s law was obeyed over the range of 1-20 μg mL–1 for UPLC and 2-12 μg / spot for HPTC with good accuracy and precision using the two procedures, respectively. Results obtained was statistically analysed and found to be in accordance with those given by the reported method. Conclusion: The proposed methods were successfully applied for the determination of sofosbuvir in bulk powder, laboratory prepared mixtures and pharmaceutical dosage form with good accuracy and precision. The methods were validated according to ICH guidelines. The results obtained were compared with those of the reported method and were found to be in good agreement.

scholarly journals DEVELOPMENT AND VALIDATION OF RAPID STABILITY-INDICATING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY METHOD FOR THE DETERMINATION OF LINAGLIPTIN AND EMPAGLIFLOZIN IN PURE AND DOSAGE FORMS

2020 ◽  
pp. 172-177
Author(s):  
RAGAA EL SHEIKH ◽  
WAFAA S HASSAN ◽  
EMANH YOUSSEF ◽  
ABDULRAHMAN Y HAMDI ◽  
NAIF AHMED BADAHDAH ◽  
...  
Keyword(s):  
High Performance Liquid Chromatography ◽  
Liquid Chromatography ◽  
Correlation Coefficient ◽  
High Performance ◽  
Dosage Forms ◽  
Hplc Method ◽  
Limits Of Detection ◽  
Stability Indicating ◽  
Tablet Dosage

Objective: A new, simple, rapid, sensitive, and accurate stability-indicating high-performance liquid chromatography (HPLC) method was developed and validated for the quantitative determination of linagliptin (LNG) and empagliflozin (EMP) in pure and tablet dosage forms. Methods: An isocratic HPLC method, using a C18 reversed-phase column (150 mm×4.6 mm i.d., particle size 5 μm) with an isocratic binary mobile phase consisting of phosphate buffer and acetonitrile (65:35, v/v), was investigated to separate the drug from its stress degradation products. The flow rate was 1.0 mL/min at ambient temperature and photodiode array detector is used at 226 nm for detection. The developed method was validated for system suitability, linearity, accuracy, precision, limits of detection and quantitation, specificity, stability, and robustness. Results: The retention time of LNG and EMP was found to be 3.276±0.002 and 6.966±0.0006 min, respectively. The calibration curve was found to be linear with the equation y=158926.39X+11.139, with a correlation coefficient of R2=0.9991 for LNG and y=22688.45X+4.259, with a correlation coefficient of R2=0.9994 for EMP over a concentration range of 2.5–7.5 μg/mL and 5.0–15 μg/mL for LNG and EMP, respectively. The limits of detection were 0.29 and 0.48 μg/mL for LNG and EMP, respectively, and the limits of quantification were 0.89 and 1.5 μg/mL for LNG and EMP, respectively. The recovery values of this method are 101.11% and 101.48% for LNG and EMP, respectively, and the reproducibility is within 0.070 and 0.277 for LNG and EMP, respectively. Conclusion: The proposed method is a rapid stability-indicating HPLC method that can be applied for the determination of LNG and EMP in pure and tablet dosage forms.

Recent Applications of High Performance Thin Layer Chromatography and Derivative Spectrophotometry in Pharmaceutical Analysis

2020 ◽  
Vol 16 (6) ◽  
pp. 671-689
Author(s):  
Marcin Gackowski ◽  
Marcin Koba ◽  
Katarzyna Mądra-Gackowska ◽  
Piotr Kośliński ◽  
Stefan Kruszewski
Keyword(s):  
Thin Layer ◽  
Thin Layer Chromatography ◽  
Pharmaceutical Analysis ◽  
High Performance ◽  
Degradation Products ◽  
Derivative Spectrophotometry ◽  
Accuracy And Precision ◽  
Post Marketing ◽  
Layer Chromatography

At present, no one can imagine drug development, marketing and post-marketing without rigorous quality control at each stage. Only modern, selective, accurate and precise analytical methods for determination of active compounds, their degradation products and stability studies are able to assure the appropriate amount and purity of drugs administered every day to millions of patients all over the world. For routine control of drugs simple, economic, rapid and reliable methods are desirable. The major focus of current scrutiny is placed on high-performance thin layer chromatography and derivative spectrophotometry methods, which fulfill routine drug estimation’s expectations [1-4]. The present paper reveals state-of-the-art and possible applications of those methods in pharmaceutical analysis between 2010 and 2018. The review shows advantages of high-performance thin layer chromatography and derivative spectrophotometry, including accuracy and precision comparable to more expensive and time-consuming methods as well as additional fields of possible applications, which contribute to resolving many analytical problems in everyday laboratory practice.

ICH/FDA Guidelines-Compliant Validated Stability-Indicating HPLC-UV Method for the Determination of Axitinib in Bulk and Dosage Forms

2020 ◽  
Vol 16 (8) ◽  
pp. 1106-1112
Author(s):  
Ibrahim A. Darwish ◽  
Nasr Y. Khalil ◽  
Mohammad AlZeer
Keyword(s):  
High Performance ◽  
Kinase Inhibitor ◽  
Degradation Products ◽  
Internal Standard ◽  
Dosage Forms ◽  
Uv Detector ◽  
Stability Indicating ◽  
Therapeutic Benefits ◽  
Relative Standard

Background: Axitinib (AXT) is a member of the new generation of the kinase inhibitor indicated for the treatment of advanced renal cell carcinoma. Its therapeutic benefits depend on assuring the good-quality of its dosage forms in terms of content and stability of the pharmaceutically active ingredient. Objective: This study was devoted to the development of a simple, sensitive and accurate stabilityindicating high-performance liquid chromatographic method with ultraviolet detection (HPLC-UV) for the determination of AXT in its bulk and dosage forms. Methods: Waters HPLC system was used. The chromatographic separation of AXT, internal standard (olaparib), and degradation products were performed on the Nucleosil CN column (250 × 4.6 mm, 5 μm). The mobile phase consisted of water:acetonitrile:methanol (40:40:20, v/v/v) with a flow rate of 1 ml/min, and the UV detector was set at 225 nm. AXT was subjected to different accelerated stress conditions and the degradation products, when any, were completely resolved from the intact AXT. Results: The method was linear (r = 0.9998) in the concentration range of 5-50 μg/ml. The limits of detection and quantitation were 0.85 and 2.57 μg/ml, respectively. The accuracy of the method, measured as recovery, was in the range of 98.0-103.6% with relative standard deviations in the range of 0.06-3.43%. The results of stability testing revealed that AXT was mostly stable in neutral and oxidative conditions; however, it was unstable in alkaline and acidic conditions. The kinetics of degradation were studied, and the kinetic rate constants were determined. The proposed method was successfully applied for the determination of AXT in bulk drug and dosage forms. Conclusions: A stability-indicating HPLC-UV method was developed and validated for assessing AXT stability in its bulk and dosage forms. The method met the regulatory requirements of the International Conference on Harmonization (ICH) and the Food and Drug Administration (FDA). The results demonstrated that the method would have great value when applied in quality control and stability studies for AXT.

scholarly journals A new stability-indicating RP-HPLC method for the determination of dicyclomine hydrochloride and dimethicone combination in tablet dosage forms

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
J. Saroja ◽  
Anantha Lakshmi P.V. ◽  
Y. Rammohan ◽  
D. Divya Reddy
Keyword(s):  
Liquid Chromatography ◽  
Dosage Forms ◽  
Flow Speed ◽  
Hplc Method ◽  
Stability Indicating ◽  
Simultaneous Quantification ◽  
Rp Hplc ◽  
Tablet Formulations ◽  
Tablet Dosage

Abstract Background We describe a “stability-indicating liquid chromatography” technique for the estimation of dimethicone (DEC) and dicyclomine hydrochloride (DEH) in the established tablet formulations. Individual quantification of DEH and DEC was reported. But simultaneous quantification of DEH and DEC was lacking. DEH and DEC were analysed on an “XTerra C18 column (250 mm × 4.6 mm, 5 μm)” with the mobile phase solvent run isocratically with 0.1M K2HPO4-acetonitrile (55:45, v/v) on a flow speed of 1.0 mL/min. Results The chromatographic run period for the DEC and DEH assay was 6.0 min with retention times of 2.134 and 2.865 min, respectively. The method was validated for accuracy (99.453 to 100.417% and 99.703 to 100.303% recovery values for DEH and DEC, respectively), precision (RSV value 0.135% for DEC and 0.171% for DEH), linearity (5–15 μg/mL for DEH and 20–60 μg/mL for DEC), selectivity (no hinderance from excipients) and specificity (no hinderance from degradants) recovery. Conclusion The developed stability-indicating liquid chromatography process was well applied to established tablet formulations.

scholarly journals Uv Spectrophotometric Methods for Determination of Sofosbuvir in Pure Form and Pharmaceutical Dosage Forms in Presence of Its Alkaline Degradate

2020 ◽  
pp. 12-25
Author(s):  
Zeinab Adel Nasr ◽  
Noha S. Said ◽  
Sawsan A. Abdel-Razeq
Keyword(s):  
Good Accuracy ◽  
Dosage Forms ◽  
Difference Spectra ◽  
Pharmaceutical Dosage Forms ◽  
Spectrophotometric Methods ◽  
Good Linearity ◽  
Ratio Difference ◽  
Accuracy And Precision ◽  
Tablet Dosage

Aims: Two spectrophotometric methods were developed and validated for the determination of sofosbuvir in presence of its alkaline degradate. Study Design: Ratio difference and ratio derivative methods were assisted for determination of sofosbuvir in presence of its alkaline degradate, laboratory-prepared mixtures and in tablet dosage forms. Place and Duration of Study: Pharmaceutical Analytical Chemistry Department, Faculty of Pharmacy (Girls), Al - Azhar University, between December 2019 and January 2020. Methodology: Two analytical methods were achieved and validated for the quantitative determination of Sofosbuvir in presence of its alkaline degradate. The first method was ratio difference (RD) method, where the UV absorption spectra of different concentrations of sofosbuvir were divided by the spectrum of a certain concentration (15 µg mL-1) as a devisor of its alkaline degradate to get the ratio difference spectra. Afterwards, the peak amplitudes difference between 253.7 and 243.5 nm were measured. The second method was the ratio derivative (1DR) method, where the first derivative of the ratio spectra (1DR) was obtained and its amplitude was measured at 247 and 268 nm. Good linearity was obtained over the concentration range of 3-15 µg mL-1 for the proposed methods. The proposed procedures were adopted for the selective determination of intact Sofosbuvir in presence of up to 80% of its degradation product. Sofosbuvir was exposed to different conditions as alkaline, acidic and oxidative degradation. Results: The proposed methods were developed and validated with good linearity range of 3-15 µg mL-1 for both methods, and also with good accuracy and precision. And the obtained results were statistically compared to those obtained by the reported method. Conclusion: Sofosbuvir was successfully determined by the proposed ratio difference and ratio derivative methods in bulk powder, laboratory prepared mixtures and tablet dosage form with good accuracy and precision. The methods were validated according to ICH guidelines. The results obtained were compared with those of the reported method and were found to be in good agreement.

scholarly journals Stability-Indicating RP-HPLC Method for Simultaneous Estimation of Enrofloxacin and Its Degradation Products in Tablet Dosage Forms

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
V. Ashok Chakravarthy ◽  
B. B. V. Sailaja ◽  
Avvaru Praveen Kumar
Keyword(s):  
High Performance ◽  
Degradation Products ◽  
Dosage Forms ◽  
Hplc Method ◽  
Simultaneous Estimation ◽  
Forced Degradation ◽  
Column Temperature ◽  
Stability Indicating ◽  
Rp Hplc ◽  
Tablet Dosage

The present work was the development of a simple, efficient, and reproducible stability-indicating reverse-phase high performance liquid chromatographic (RP-HPLC) method for simultaneous determination enrofloxacin (EFX) and its degradation products including ethylenediamine impurity, desfluoro impurity, ciprofloxacin impurity, chloro impurity, fluoroquinolonic acid impurity, and decarboxylated impurity in tablet dosage forms. The separation of EFX and its degradation products in tablets was carried out on Kromasil C-18(250×4.6 mm, 5 μm) column using 0.1% (v/v) TEA in 10 mM KH2PO4(pH 2.5) buffer and methanol by linear gradient program. Flow rate was 1.0 mL min−1with a column temperature of 35°C and detection wavelength was carried out at 278 nm and 254 nm. The forced degradation studies were performed on EFX tablets under acidic, basic, oxidation, thermal, humidity, and photolytic conditions. The degraded products were well resolved from the main active drug and also from known impurities within 65 minutes. The method was validated in terms of specificity, linearity, LOD, LOQ, accuracy, precision, and robustness as per ICH guidelines. The results obtained from the validation experiments prove that the developed method is a stability-indicating method and suitable for routine analysis.

Sign in / Sign up

Export Citation Format

Share Document