scholarly journals Effect of Organic Manure and Mulching on the Growth and Yield of Carrot (Daucus carota L.)

2019 ◽  
pp. 1-11
Author(s):  
Bithi Rani Biswas ◽  
Khaleda Khatun ◽  
Md. Ehsanul Haq ◽  
Jinia Afsun ◽  
Md. Nahidul Islam ◽  
...  
Keyword(s):  
Plant Height ◽  
Root Length ◽  
Block Design ◽  
Root Diameter ◽  
Organic Manure ◽  
Growth And Yield ◽  
Root Weight ◽  
Root Yield ◽  
Net Return ◽  
Four Levels

An experiment on effect of organic manure & mulching on the growth and yield of carrot was conducted at the farm of Sher-e-Bangla Agricultural University, Dhaka during the period from November 2017 to February 2018. The research consisted in Randomized Complete Block Design (RCBD) with three replications under a factorial arrangement (of two factors), with Four levels of organic manure, as the factor A and four mulches such as factor B. Organic manure and mulching influenced significantly (p=0.05) all the studied variables. In case of organic manure the maximum plant height (44.55 cm) root length (14.73 cm), root diameter (4.11 cm), root weight (124.50 g), root yield (24.90 t/ha) and marketable root yield (23.85 ton/ha) were recorded from O2 (Vermicompost) treatment. In case of mulches, maximum plant height (44.81 cm), root length (15.20 cm), root diameter (3.91 cm), root weight (117.85 g), root yield (23.57 t/ha) and marketable root yield (21.95 t/ha) found in M2 (Black polythene) treatment. And the combined effect of the highest root yield (29.06 t/ha) was obtained from O2M2 (Vermicompost + black polythene) and lowest (13.20 t/ha) from O0M0 (control). So, it can be concluded that 10 ton/ha vermicompost with black polythene mulch was the best for carrot cultivation. The highest gross return (Tk. 563200), net return (Tk. 446355) and BCR (4.82) were obtained from the treatment combination from O2M2  where the lowest gross return (Tk. 207800), net return (Tk.112755)  were obtained from O0M0 and lowest BCR (1.67) from O1M0.

scholarly journals Evaluation of improved cassava genotypes for yield and related traits for a better breeding strategy under different agroecologies in Nigeria

Euphytica ◽  
2021 ◽  
Vol 217 (4) ◽  
Author(s):  
N. A. Adetoro ◽  
O. O. Oworu ◽  
A. L. Nassir ◽  
A. Bello ◽  
E. Parkes ◽  
...  
Keyword(s):  
Plant Height ◽  
Dry Matter ◽  
Block Design ◽  
Pasting Properties ◽  
Growth And Yield ◽  
Root Weight ◽  
Root Yield ◽  
Root Characteristics ◽  
Stay Green ◽  
Fresh Root

AbstractThis study aimed at determining shoot and root characteristics of cassava as affected by root yield and the influence of soil moisture on vegetative growth and yield. Thirty cassava genotypes were evaluated for morphological and physiological characterization in three locations in Nigeria: Ibadan, Mokwa and Zaria. Randomized complete block design was used with four replicates. Studies on the pasting properties of the genotypes were also carried out. Data were collected on plant height, stem girth, stay-green ability, garri and fresh root weight. Genotypes differed significantly (P < 0.05) across and within locations for shoot and root characteristics. Across locations, genotype 011663 had the highest plant height (132.4 cm); 30572 had the largest stem girth (8.6 cm); and 010040 was the best stay-green (2.2). Genotype 011086 had the highest number of roots per plot (95.7), 950289 had the highest fresh root yield (24.3 t/ha), and 990554 had the highest percentage of dry matter (35.2). Trends in root yields across locations were Ibadan (28.9 t/ha), Mokwa (20.3 t/ha), and Zaria (8 t/ha). Five genotypes IITA-TMS-IBA950289, 010034, 990554, 011807, and 980581 had negligible interactions with the environment and so have broad adaptation and are considered stable; and two clones 011807 and 950166 were found to be the best for pasting properties. Breeding strategies that consider root size, total root number, harvest index, dry matter, with applications for household foods and industrial uses, will be an effective and efficient way to select genotypes for high yield.

scholarly journals Nitrogen Application and Leaf Harvesting Improves Yield and Nutritional Quality of Beetroot

2017 ◽  
Vol 27 (3) ◽  
pp. 337-343 ◽  
Author(s):  
Salfina S. Mampa ◽  
Martin M. Maboko ◽  
Puffy Soundy ◽  
Dharini Sivakumar
Keyword(s):  
Block Design ◽  
Root Diameter ◽  
Total Protein Content ◽  
Root Weight ◽  
Nitrogen Application ◽  
Root Yield ◽  
N Application ◽  
Leaf Yield ◽  
Leaf Harvest

Beetroot (Beta vulgaris), commonly known as table beet, is used as a staple in the diet of many people through the consumption of the entire plant, leaf, and the root. The objective of this study was to assess the effects of nitrogen (N) application and leaf harvest percentage on the yield and quality of roots and leaves of beetroot. The treatment design was a randomized complete block design with five levels of N (0, 60, 90, 120, and 150 kg·ha−1) combined with three leaf harvest percentages (0, 30, and 50) and replicated three times. The first leaf harvest was initiated 35 days after transplanting (DAT) by removing the outer matured leaves and the second harvest occurred 80 DAT by removing all the leaves. The results showed increases in leaf and root yield with an increase in N application. Nitrogen application at 90 and 120 kg·ha−1 increased fresh leaf weight, leaf number, and fresh and dry root weight, including root diameter and length with the exception of leaf area which was significantly higher at 120 kg·ha−1 N. Magnesium and iron leaf content, and N root content were significantly improved by the application of 120 kg·ha−1 N. Leaf harvest percentage did not have a significant effect on leaf yield or leaf and root mineral content. However, dry root weight was significantly reduced by the 50% leaf harvest. Leaf harvest at 30% or 50% increased total protein content of the roots of beetroot, whereas an increase in N application decreased concentration of total proteins. Results demonstrate that leaf and root yield, as well as magnesium, zinc, and iron leaf content, increased with the application of 120 kg·ha−1 N, whereas 30% leaf harvest did not negatively affect root yield.

scholarly journals Response of growth and yield of two soybean varieties to seed pre-treatment applications

2021 ◽  
Vol 883 (1) ◽  
pp. 012052
Author(s):  
N Herawati ◽  
A R Aisah ◽  
I Mardian ◽  
B N Hidayah ◽  
B T R Erawati
Keyword(s):  
Plant Height ◽  
Seed Treatment ◽  
Seed Quality ◽  
Block Design ◽  
Growth And Yield ◽  
Agronomic Crops ◽  
Randomized Block Design ◽  
Two Factors ◽  
Pre Treatment ◽  
Four Levels

Abstract Plant growth is influenced by seed quality. Seeds need to be treated to prevent pest and disease disorders or to increase seed germination. Soybean planting was carried out in this study by the treatment of varieties and seed pre-treatment application before planting. The study aimed to measure the growth and yield of soybeans by varieties and seed treatment before planting, carried out in the Village of Nggembe, District of Bolo, Bima Regency. The study used factorial randomized block design with two factors. The first factor was soybean varieties consisting of two levels, namely Devon and Dena varieties, and the second factor was the application of pre-planting seed treatments consisting of four levels namely Cruiser, Marshall, Agrisoy, and without seed treatment, each treatment was repeated three times. Observations were made on the performance of agronomic crops and soybean yields. The results showed that the treatment of soybean varieties and the application of seed treatment had a significant influence on plant height and soybean productivity, and both treatments had interactions on parameters of plant height, number of filled pods, weight of 100 seeds, and soybean productivity with the best results successively produced by a combination of Devon-Control, Devon-Marshall, Devon-Agrisoy, and Dena-Cruiser.

scholarly journals Aplikasi Integrasi Pupuk NPK Dengan Waktu Pemberian Pupuk Organik Cair Pada Tanaman Pakcoy (Brassica rapa L.)

2018 ◽  
Vol 14 (1) ◽  
pp. 14-20
Author(s):  
Yance N Ayal ◽  
Henry Kesaulya ◽  
Francina Matulessy
Keyword(s):  
Leaf Area ◽  
Plant Height ◽  
Root Length ◽  
Organic Fertilizer ◽  
Growth And Yield ◽  
Leaf Number ◽  
Root Weight ◽  
Plant Weight ◽  
Total Plant ◽  
Npk Fertilizer

This research was aimed to get the optimum NPK fertilizer dosage with the time of liquid organic fertilizer application to support the growth and yield of pakcoy (Brassica rappa L.). The study used a Randomized Block Design with three replications. Observation variables included plant height, leaf number, leaf area, total plant weight, root length, root weight and total plant weight percentage. The results showed that N0 (without NPK fertilizer) was the best based on the plant height and leaf number. Liquid organic fertilizer given at 3-time applications per plant (W3) contributed significantly to leaf number at 35 days after planting and gave the highest yield of leaves, with 17,45 leaves. The treatment of NPK compound fertilizer dosage with the time of liquid organic fertilizer gave significant effects on the leaf area, total plant weight, root length, and root weight. Keywords: liquid organic fertilizer, NPK, pakcoy   ABSTRAK Penelitian ini bertujuan untuk mendapatkan dosis pupuk NPK dengan waktu plikasi pupuk organik cair yang tepat untuk menunjang pertumbuhan danp roduksi tanaman pakcoy (Brassica rappa L.). Penelitian mengunakan Rancangan Acak Kelompok dengan tiga ulangan. Peubah-peubah pengamatan meliputi tinggi tanaman, jumlah daun, luas daun, berat total tanaman, panjang akar, berat akar dan persentase berat total tanaman. Hasil penelitian menunjukkan bahwa perlakuan N0 (tanpa pupuk NPK) merupakan yang terbaik dari penelitian ini terhadap parameter tinggi tanaman dan jumlah daun. Waktu pemberian pupuk organik cair 3 kali/tanaman (perlakuan W3) memberikan kontribusi yang signifikan terhadap jumlah daun 35 hari setelah tanam dan menghasilkan daun terbanyak dengan jumlah 17,45 helai. Perlakuan dosis pupuk majemuk NPK dengan waktu pemberian pupuk organik cair memberikan pengaruh yang nyata sampai sangat nyata terhadap luas daun, berat total tanaman, panjang akar serta berat akar. Kata kunci: NPK, pakcoy, pupuk organik cair

scholarly journals Effect of cattle manure on growth and yield of carrot (Daucus Carrota L.) under Jimma condition

2018 ◽  
Author(s):  
Gerba Daba ◽  
Meseret Mulugeta ◽  
Tarike Ayana
Keyword(s):  
Growth Parameters ◽  
Block Design ◽  
Root Diameter ◽  
Cattle Manure ◽  
Growth And Yield ◽  
Control Treatment ◽  
Future Research ◽  
Root Weight ◽  
Cropping Season ◽  
Irrigation Condition

So far, research has been conducted to know the effect of cattle manure fertilizer on growth and yield of carrot under Jimma condition. Experiment was conducted at Jimma University College of Agriculture and Veterinary Medicine at horticulture garden during 2016 cropping season under irrigation condition. Experiment was laid out in randomized complete block design and cattle manure applications with four treatments (0, 5, 10 and 18 tons per hectare) were used. Each treatment was replicated three times. Data was collected from five randomly taken plants per plot. The finding revealed that application of cattle manure on carrot showed a highly significant effect for growth parameters (plant height, canopy diameter, root length and root diameter). Application of cattle manure at 10 tons ha-1 increased carrot root weight by 48.8 % compared to the non-fertilized control treatment. Therefore, this finding would be a base for future research to be conducted.

scholarly journals Effect of cutting position and vine pruning level on yield of Sweet Potato (Ipomoea Batatas L.)

1970 ◽  
pp. 01-05
Author(s):  
Ncube Netsai ◽  
Mutetwa Moses, Mtaita Tuarira
Keyword(s):  
Sweet Potato ◽  
Root Length ◽  
Ipomoea Batatas ◽  
Block Design ◽  
Root Diameter ◽  
Root Weight ◽  
Stem Cuttings ◽  
Storage Root ◽  
Storage Roots ◽  
Significant Difference

There is significant variation in yield of storage roots and vines of sweet potato (Ipomoea batatas) among farmers due to use of different cutting positions and pruning of vines at different levels. This study was carried out to establish the cutting position and the vine pruning level that give the best yield of both the storage roots and vines. The study was conducted in a 3x3 factorial arrangement in Randomized Complete Block Design (RCBD) with three replications. Treatments included cutting position at three levels (apical cutting, middle cutting and basal cutting) and pruning at three levels, 0%, 25% and 50% respectively. Pruning was done. 50 days after planting. And storage root harvesting was done 100 days after planting. The two measurements were summed up to give the total vine weight. Storage root length, diameter and weight were measured at 100 DAP. Storage root length indicated significant difference (P<0.05) only among cutting positions with highest mean length (16.20 cm) obtained from apical cutting and the lowest (11.98 cm) from basal cutting. Storage root diameter, storage root weight and vine weight indicated significant interaction (P<0.05) of cutting position and vine pruning level. Highest mean root diameter and root weight were obtained from middle cutting and 25% vine pruning level, with the lowest being obtained from basal cutting and 50% vine pruning level. Highest vine weight was recorded from middle cutting and 50% vine pruning level, with the lowest being recorded from basal cutting and 0% vine pruning level. Both middle and apical stem cuttings can be recommended for higher storage root and vine yield. Vine pruning at 25% can be adopted for higher storage root yield while pruning at 50% can be suggested for higher vine yield.

Moisture Soil Level Determination in Husk Tomato (Physalis ixocarpa Brot.) Crop in Western Mexico

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 488d-488
Author(s):  
F. Radillo-Juárez ◽  
J. Farias-Larios
Keyword(s):  
Plant Height ◽  
Vegetative Growth ◽  
Root Length ◽  
Block Design ◽  
Gravimetric Method ◽  
Fresh Fruit ◽  
Moisture Level ◽  
Growth And Yield ◽  
Husk Tomato ◽  
Fruit Diameter

When moisture conditions in soil are suitable, the husk tomato has good vegetative growth and high yield. The objective of this work was determine the minimum available moisture level to obtain the highest yield, and establish an irrigation calendar. Treatments evaluated were: 15%, 30%, 45%, and 60% of moisture reduction in soil, according to the gravimetric method, in a randomized complete-block design with four replications. The variance analysis and Duncan test were carried out at a 0.05 level of probability for following variables studied: Fresh fruit yield (kg/ha), plant height, root length, and fruit diameter. The results show that a 30% reduction moisture level was remarkable with a 28,610.67-kg/ha yield of fresh fruit. In relation to agronomics characteristics, the results show that, for plant height, root length, and fruit diameter were remarkable with the 15% and 60% reduction moisture, respectively. This was due to the greater interval of irrigation and tendency of root system to search for moisture. The greater vegetative growth and yield is with a moisture level of 65% to 80% present in soil, indicating that the husk tomato tolerates this 30% of reduction moisture, with higher values producing more stress in plants and modifying the vegetative growth and production.

Effect of Phosphorus and Zinc Interaction on Performance of Green Gram [Vigna radiata (L.) Wilczek]

2020 ◽  
Author(s):  
Mamta Phogat ◽  
Padma Angmo ◽  
A. K. Mondal ◽  
Sunil Kumar ◽  
A. P. Rai
Keyword(s):  
Plant Height ◽  
Vigna Radiata ◽  
Seed Weight ◽  
Block Design ◽  
Green Gram ◽  
Growth And Yield ◽  
Treatment Level ◽  
Yield Attributes ◽  
Stover Yield ◽  
Four Levels

The experiment comprising of four levels of phosphorus, i.e., 0, 20, 40 and 60 kg ha-1 and four levels of zinc, i.e., 0, 5, 10 and 15 kg ha-1 was conducted to investigate the interaction effect of phosphorus and zinc fertilization on yield and yield attributes of green gram [Vigna radiata (L.) Wilczek] cv. SML-668. The treatments were laid out in Randomized Block Design (Factorial) with three replications. The results revealed that plant height, number of pods plant-1, 1000 seed weight, seed and stover yield were increased significantly up to 60 kg ha-1 phosphorus and 10 kg ha-1 zinc treatment levels. Further increase in zinc levels found to decrease the yield and yield attributing traits, indicating antagonistic effect of phosphorus and zinc on each other. The highest plant height, number of pods plant-1, 1000 seed weight, seed and stover yield (at 60 kg P ha-1 and 10 kg Zn ha-1 treatment level) were 48.70 cm, 27.15, 32.70 g, 957.25 and 2398.30 kg ha-1, respectively. Thus, interaction of phosphorus and zinc was significant for all the growth and yield attributing parameters.

scholarly journals RESPON PERTUMBUHAN DAN PRODUKSI KEDELAI TERHADAP PEMUPUKAN HAYATI PADA LAHAN KERING DI PANDEGLANG, BANTEN

2016 ◽  
Vol 19 (3) ◽  
pp. 253 ◽  
Author(s):  
Resmayeti Purba
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Root Length ◽  
Root Nodules ◽  
Block Design ◽  
Growth And Yield ◽  
Organic Fertilization ◽  
Dry Land ◽  
Randomized Block Design ◽  
Harvest Data

<p>Penelitian yang bertujuan untuk mengetahui respon dari pertumbuhan dan produksi kedelai terhadap pemupukan hayati (Agrimeth dan Gliocompost) pada lahan kering dilakukan di Kabupaten Pandeglang Banten, April –Juni 2016. Penelitian menggunakan rancangan acak kelompok, dengan enam perlakuan: (A). Tanpa pemupukan (kontrol); (B). Pupuk rekomendasi: 100 kg/ha urea + 100 kg/ha SP-36 + 250kg/ha NPK Phonska; (C) Pupuk Hayati Agrimeth 200 g/ha + 25% pupuk rekomendasi; (D). Pupuk Hayati Agrimeth 200 g/ha + 50% pupuk rekomendasi; (E) Pupuk Hayati Gliocompost 20 kg/ha+ 25% pupuk rekomendasi; dan, (F) Gliocompost 20 kg/ha + 50% pupuk rekomendasi. Parameter yang diamati meliputi: tinggi tanaman (cm), panjang akar (cm) dan jumlah bintil akar pertanaman pada 42 hst, jumlah polong isi pertanaman dan hasil biji kedelai kering (t/ha) saat panen. Analisis data 254 Jurnal Pengkajian dan Pengembangan Teknologi Pertanian, Vol. 19, No.3, November 2016: 253-261 menggunakan ANOVA dengan uji lanjutan menggunakan DMRT dengan aplha 5%. Hasil penelitian menunjukkan bahwa perlakuan pemberian Agrimeth 200 g/ha + 50% pupuk rekomendasi berbeda sangat nyata dibandingkan lima perlakuan lainnya terhadap tinggi tanaman, panjang akar, bintil akar, polong isi dan hasil biji kedelai. Perlakuan ini memberikan hasil tertinggi untuk semua parameter yang dianalisis. Respon pertumbuhan dan hasil kedelai terhadap pemberian masing-masing pupuk hayati Agrimeth dan Gliocompost pada budidaya kedelai di lahan kering lebih tinggi dibandingkan perlakuan yang hanya menggunakan pupuk anorganik rekomendasi. Penggunaan Agrimeth 200 g/ha mampu mensubtitusi 50% pupuk anorganik rekomendasi. Pada penggunaan 25% pupuk rekomendasi, penambahan pupuk hayati Agrimeth 200 g/ha mampu mensubtitusi penambahan Gliocompost 20 kg/ha.</p><p><strong>ABSTRACT</strong><br /><br />The Growth and Production of Soybean towards Organic Fertilization on Dryland in Pandeglang, Banten. The study aimed to investigate the response of the growth and production of soybean towards biofertilizer (Agrimeth and Gliocompost) on dry land, in Pandeglang Banten from April to June 2016. The study was a randomized block design, with six treatments: (A). Without fertilization (control); (B). Recommended Fertilizer consist of 100 kg/ha of urea + 100 kg/ha of SP-36 + 250 kg/ha of NPK Phonska; (C) Agrimeth Biofertilizer 200 g/ha + 25% recommended fertilizer; (D). Agrimeth Biofertilizer 200 g/ha + 50% recommended fertilizer; (E) Gliocompost Biofertilizer 20 kg/ha + 25% recommended fertilizer; and (F) Gliocompost Biofertilizer 20 kg/ha + 50% recommended fertilizer. The observed parameters were plant height (cm) after harvest, root length (cm) and the number of root nodules crop at 42nd days, number of filled pods and seed yield of dried soybean crops (t/ha) at harvest. Data were analyzed using ANOVA with advanced test using DMRT with aplha 5%. The results showed that the application of 200 g/ha of Agrimeth + 50% of recommended fertilizer resulted significant differences comparing to the other treatments on plant height, root length, root nodules, filled pods and seed yield of soybean. This treatment contributed the highest result of all parameters. The response of growth and yield of soybean using Agrimeth and Gliocompost as biofertilizer separately in dry land were higher than those applying the recommended anorganic fertilizer. The use of 200 g/ha of Agrimeth could subtitute 50% of recommended anorganic fertilizer. In the application of 25% of recommended anorganic fertilizer, intake of 200 g/ha of Agrimeth were able to subtitute 20 kg/ha of Gliocompost.</p>

scholarly journals Pengaruh Aplikasi Biostimulan Terhadap Pertumbuhan dan Produksi Tanaman Sawi (Brassica juncea L.)

2018 ◽  
Vol 14 (1) ◽  
pp. 41-46
Author(s):  
Rismawaty Saban ◽  
Henry Kesaulya ◽  
Jeanne I Nendissa
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Growth Yield ◽  
Dry Weight ◽  
Growth And Yield ◽  
Root Weight ◽  
Single Factor ◽  
Fresh Weight ◽  
Randomized Block Design ◽  
Mustard Plant

This study aimed to determine the effect of different biostimulant applications (solid and liquid) on the growth and yield of mustard plants. This study used a single factor Randomized Block Design (RBD), consisting of solid or liquid biostimulant treatment, each has twelve levels, i.e. K0 = without biostimulant, K1 = NPK 1 g per plant, solid and liquid biostimulant each consisting of 10 treatments = B1, B2, B3, B4, B5, B6, B7, B8, B9, B10. Solid biostimulant was given at 2.5 g per plant and liquid biostimulant at 10 ml per plant. The results showed that liquid biostimulant gave a significant effect on plant height, crop fresh weight, and crop dry weight; whereas solid biostimulant gave a very significant effect on entire weight, i.e. fresh weight of mustard plant, fresh root weight, and crop dry weight. The best treatment for liquid biostimulant was B1 treatment; whereas for the solid biostimulant was B7 treatment. Keywords: biostimulant, mustard, growth, yield   ABSTRAK Penelitian ini bertujuan untuk mengetahui pengaruh aplikasi biostimulan yang berbeda (biostimulan padat dan cair) terhadap pertumbuhan dan produksi tanaman sawi. Penelitian ini menggunakan rancangan acak kelompok faktor tunggal yang terdiri dari perlakuan Biostimulan (padat dan cair) yang masing-masing perlakuan terdapat dua belas taraf (P): K0 = tanpa biostimulan, K1 = NPK 1 g/tan, Biostimulan padat dan cair masing-masing terdiri dari 10 perlakuan = B1, B2, B3, B4, B5, B6, B7, B8, B9, B10. Biostimulan padat 2.5 g/tan dan biostimulan cair 10 ml/tan. Hasil penelitian menunjukkan bahwa biostimulan cair memberikan pengaruh yang nyata terhadap tinggi tanaman sawi, berat segar tanaman, dan berat kering tanaman, sedangkan biostimulan padat memberikan pengaruh yang sangat nyata terhadap semua bobot berat tanaman sawi yaitu berat segar tanaman, berat segar akar, dan berat kering tanaman. Perlakuan terbaik untuk biostimulan cair adalah perlakuan B1, sedangkan untuk biostimulan padat perlakuan yang terbaik adalah perlakuan B7. Kata kunci: biostimulan, sawi, pertumbuhan, produksi

Sign in / Sign up

Export Citation Format

Share Document