Effect of Nano, Bio and Organic Fertilizers on Some Soil Physical Properties and Soybean Productivity in Saline Soil

2021 ◽  
pp. 44-57
Author(s):  
Kh. A. Shaban ◽  
M. A. Esmaeil ◽  
A. K. Abdel Fattah ◽  
Kh. A. Faroh
Keyword(s):  
Humic Acid ◽  
Hydraulic Conductivity ◽  
Physical Properties ◽  
Bulk Density ◽  
Saline Soil ◽  
Field Capacity ◽  
Soil Physical Properties ◽  
Organic Fertilizers ◽  
Mineral Fertilizers ◽  
Soil Conditions

A field experiment was carried out at Khaled Ibn El-waleed village, Sahl El-Hussinia, El-Sharkia Governorate, Egypt, during two summer seasons 2019 and 2020 to study the effect of NPK nanofertilizers, biofertilizers and humic acid combined with or without mineral fertilizers different at rates on some soil physical properties and soybean productivity and quality under saline soil conditions. The treatments consisted of: NPK-chitosan, NPK-Ca, humic acid, biofertilzer and control (mineral NPK only). In both seasons, the experiment was carried out in a split plot design with three replicates. The results indicated a significant increase in the soybean yield parameters as compared to control. There was also a significant increase in dry and water stable aggregates in all treatments as compared to control. The treatment NPK-Chitosan was the best in improving dry and stable aggregates. Also, hydraulic conductivity and total porosity values were significantly increased in all treatments due to increase in soil aggregation and porosity that led to increase in values of hydraulic conductivity. Values of bulk density were decreased, the lowest values of bulk density were found in NPK-chitosan treatment as a result of the high concentration of organic matter resulted from NPK-chitosan is much lighter in weight than the mineral fraction in soils. Accordingly, the increase in the organic fraction decreases the total weight and bulk density of the soil. Concerning soil moisture constants, all treatments significantly increased field capacity and available water compared to control. This increase was due to improvement of the soil aggregates and pores spaces which allowed the free movement of water within the soil thereby, increasing the moisture content at field capacity.

Effects of the combined application of biomaterial amendments and polyacrylamide on soil water and maize growth under deficit irrigation

2019 ◽  
Vol 99 (2) ◽  
pp. 182-194
Author(s):  
Yajin Hu ◽  
Nini Guo ◽  
Robert L. Hill ◽  
Shufang Wu ◽  
Qin’ge Dong ◽  
...  
Keyword(s):  
Physical Properties ◽  
Soil Water ◽  
Deficit Irrigation ◽  
Irrigation Management ◽  
Field Capacity ◽  
Soil Physical Properties ◽  
Soil Conditions ◽  
Irrigation Level ◽  
Maize Growth ◽  
Irrigation Levels

Combined applications of mixed biomaterial amendments and polyacrylamide (MBAP) to maize in semiarid areas have the potential to improve soil physical properties such that improved crop performance may be obtained under deficient irrigation management. In this study, three MBAP applications were C0 (conventional N fertilization application) and C2 and C4 (MBAP applied at rates of 2 and 4 t ha−1, respectively); three irrigation levels were W3 (nearly full irrigation, 85%–100% of field capacity), W2 (light deficit irrigation, 65%–75% of field capacity), and W1 (medium deficit irrigation, 55%–65% of field capacity). Under the same irrigation level, the MBAP significantly decreased soil bulk densities and increased soil hydraulic conductivities and soil water contents. The effects of irrigation levels on soil bulk densities and soil saturated hydraulic conductivities were not significant. Consequently, MBAP improved soil conditions for maize growth and increased grain and biomass yields, especially at the two deficit irrigation levels. Compared with that of C0, grain yields for C2 and C4 were increased by 52.8% and 39.3% under W2, and by 23.5% and 13.7% under W1, respectively. The MBAP and irrigation had significant interaction effects on evapotranspiration during sowing to jointing and on plant heights at 32 d after sowing. The incorporation of MBAP (2 t ha−1) and chemical fertilizer (111.8 kg N ha−1) resulted in the greatest yields under light deficit irrigation and seemed the best approach to improve soil physical properties and sustain maize productivity using limited water resources in dryland regions.

Effect of management practice on properties of a Victorian red-brown earth .1. Soil physical-properties

Soil Research ◽  
1995 ◽  
Vol 33 (5) ◽  
pp. 851 ◽  
Author(s):  
MS Lorimer ◽  
LA Douglas
Keyword(s):  
Particle Size ◽  
Hydraulic Conductivity ◽  
Physical Properties ◽  
Bulk Density ◽  
Management Practices ◽  
Management Practice ◽  
Fine Sand ◽  
Soil Physical Properties ◽  
Native Forest ◽  
Continuous Cropping

The effects of five management practices (native forest, native pasture, Phalaris pasture, crop-pasture rotation, continuous cropping), that had been in place for 18 years, on some soil physical properties of a red-brown earth near Bendigo, Victoria, were studied. Particle size distribution, bulk density and hydraulic conductivity of soil in the A and B horizons at different, management sites were measured. Where cultivation had occurred, soil in the A horizon contained less silt and clay, and more fine sand and coarse sand. The bulk density of the A horizon of soil that had produced at least six wheat crops since 1969 was greater than that of soil used for pasture or forest, while the hydraulic conductivity of soil cropped every year since 1969 was much less than that of soil under native forest. Particle size distributions for soil from the B horizons at the five management sites were found to be similar. Where pastures and crops had been established, the hydraulic conductivity of the upper B horizon was lower, and the bulk density was higher, than that of soil in the native forest (Eucalyptus spp).

EFFECT OF LONG-TERM MINIMUM TILLAGE PRACTICES ON SOME PHYSICAL PROPERTIES OF A CHERNOZEMIC CLAY LOAM

1989 ◽  
Vol 69 (3) ◽  
pp. 443-449 ◽  
Author(s):  
C. CHANG ◽  
C. W. LINDWALL
Keyword(s):  
Hydraulic Conductivity ◽  
Physical Properties ◽  
Bulk Density ◽  
Infiltration Rate ◽  
Conventional Tillage ◽  
Soil Physical Properties ◽  
Clay Loam ◽  
Minimum Tillage ◽  
No Till

This study was conducted to compare the long-term (20 yr) effects of conventional tillage, minimum tillage and no-till on various soil-water related properties within the tilled layer (0–30 and 30–60 mm) and immediately below the tilled layer (90–120 mm) under a spring cereal-summerfallow rotation cropping system. Parameters measured included saturated hydraulic conductivity, saturation percentage, plant-available water-holding capacity, large pore porosity, bulk density, and infiltration rate of the soil. Tillage treatment effects on these soil properties in each of the four sampling periods were not significantly different. The confidence interval test showed some temporal changes in these soil physical properties, of which hydraulic conductivity was the most affected. In the summerfallow field, regardless of the previous cereal crops, the steady infiltration rate was significantly lower in the soil under conventional tillage than with that under no-till. The results indicate that the surface soil structure was most stable under no-till. In the fresh stubble field, the type of cereal crop had an effect on the infiltration rate of the soil. The mean infiltration rate was higher in the summerfallow field than in the fresh stubble field and also was higher in the fresh barley stubble than in the fresh wheat stubble. Except for infiltration rates, there is no significant advantage of one tillage method over the other with respect to the soil physical properties measured in this Brown Chernozemic clay loam soil. Key words: No-till, minimum tillage, hydraulic conductivity, bulk density, infiltration

Quantifying variability of soil physical properties within soil series to address modern land-use issues on the Canterbury Plains, New Zealand

Soil Research ◽  
2000 ◽  
Vol 38 (6) ◽  
pp. 1115 ◽  
Author(s):  
T. H. Webb ◽  
J. J. Claydon ◽  
S. R. Harris
Keyword(s):  
Hydraulic Conductivity ◽  
Physical Properties ◽  
Clay Content ◽  
Total Porosity ◽  
Field Capacity ◽  
Soil Physical Properties ◽  
Saturated Hydraulic Conductivity ◽  
Soil Series ◽  
Available Water ◽  
Wilting Point

Lack of accurate data to estimate soil physical properties for soil types is limiting the wide application of simulation models to address modern environmental and land-use issues. In this study, systematic sampling of soil profiles for soil physical characteristics has provided an improved basis upon which to estimate a number of soil physical properties for 4 soil series. The selected soils form a soil drainage sequence on the post-glacial surface of the Canterbury Plains and vary from shallow sandy loam, well-drained soils to deep clay loam, poorly drained soils. Three profiles within 3 map units were sampled for each of 4 soil series. Three horizons in each soil profile were sampled for soil porosity values, particle size, and saturated and near-saturated hydraulic conductivity. Variability in all data, as shown by coefficient of variation, increased in the order: total porosity = field capacity < wilting point < total available water = clay content < readily available water < macroporosity < sand content < hydraulic conductivity. Hydraulic conductivity exhibited high variability within horizons, between profiles, and within soil series. Temuka subsoils had extremely high variability in saturated hydraulic conductivity and this could be explained by their coarse prismatic structure. Analysis of variance identified horizons that differed in soil physical properties between soil series. Horizons that do not differ between series may be given pooled soil property values for the pooled series. Total porosity, field capacity, wilting point, clay content, and near-saturated hydraulic conductivity had the greatest number of differences (60–70%) between series comparisons, while total available water had fewest differences (5%). The series with greatest differences in drainage class (Temuka compared with Eyre or Templeton soils) recorded the largest number of differences in water release characteristics and particle size. There were few differences between well-drained Eyre and moderately well-drained Templeton series. Subsoils of Eyre series differed in hydraulic conductivity from subsoils for the other 3 series, but few differences in hydraulic conductivity were found between horizons of Templeton, Wakanui, and Temuka series. Hydraulic conductivity estimates for these series can therefore be pooled.

scholarly journals EFFECT OF IRRIGATION WATER SALINITY AND TILLAGE SYSTEMS ON SOME PHYSICAL SOIL PROPERTIES

2019 ◽  
Vol 50 (Special) ◽  
Author(s):  
Hassan & et al.
Keyword(s):  
Hydraulic Conductivity ◽  
Physical Properties ◽  
Bulk Density ◽  
Irrigation Water ◽  
Conventional Tillage ◽  
Soil Physical Properties ◽  
Well Water ◽  
Tillage Systems ◽  
Tillage System ◽  
Density Values

The current study investigated the effect of water quality (the salinity of the irrigation water) and Tillage system on some soil physical properties. The experiment was carried out using RCBD with three replicates. wheat was irrigated by three water sources, a  river ,dranege and well waters with electrical conductivities  1.3, 3.5 and 6.9 ds.m-1 respectively and three tillage systems were zero tillage (ZT), conventional tillage (CT) and deep tillage (DT). After harvest, some soil physical properties were evaluated including: bulk density, porosity, penetration resistance, hydraulic conductivity and mean weight diameter. The result showed that the bulk density values were 1.40, 1.44 and 1.47 mg.m-3  for river, derange and well water. while the porosity values were 47.3%, 45.8%  and 43.8%. for river, derange and well water. while the hydraulic conductivity  were 5.13, 4.26 and 4.36 cm.h-1for river , derange and well water. also the result showed that the bulk density values were 1.48, 1.44 and 1.38 mg.m-3 for ZT, CT and DT respectively. while the porosity values were 44.3, 45.7 and 47.8% for ZT, CT and DT respectively. But for the interactions for electrical conductivity with tillage The result showed that the bulk density values were 1.50 mg.m-3  for well water with ZT but decrees value it become 1.34 mg.m-3  for river water with DT. The best type of tillage was conventional tillage as it has the ability to improve properties of soil as well as it helps to reduce.

scholarly journals Stabilization of soil hydraulic properties under a long term no-till system

2014 ◽  
Vol 38 (4) ◽  
pp. 1281-1292 ◽  
Author(s):  
Luis Alberto Lozano ◽  
Carlos Germán Soracco ◽  
Vicente S. Buda ◽  
Guillermo O. Sarli ◽  
Roberto Raúl Filgueira
Keyword(s):  
Hydraulic Conductivity ◽  
Physical Properties ◽  
Hydraulic Properties ◽  
Sandy Loam ◽  
Soil Physical Properties ◽  
Water Retention Curve ◽  
Mean Values ◽  
Tillage System ◽  
Crop Sequence

The area under the no-tillage system (NT) has been increasing over the last few years. Some authors indicate that stabilization of soil physical properties is reached after some years under NT while other authors debate this. The objective of this study was to determine the effect of the last crop in the rotation sequence (1st year: maize, 2nd year: soybean, 3rd year: wheat/soybean) on soil pore configuration and hydraulic properties in two different soils (site 1: loam, site 2: sandy loam) from the Argentinean Pampas region under long-term NT treatments in order to determine if stabilization of soil physical properties is reached apart from a specific time in the crop sequence. In addition, we compared two procedures for evaluating water-conducting macroporosities, and evaluated the efficiency of the pedotransfer function ROSETTA in estimating the parameters of the van Genuchten-Mualem (VGM) model in these soils. Soil pore configuration and hydraulic properties were not stable and changed according to the crop sequence and the last crop grown in both sites. For both sites, saturated hydraulic conductivity, K0, water-conducting macroporosity, εma, and flow-weighted mean pore radius, R0ma, increased from the 1st to the 2nd year of the crop sequence, and this was attributed to the creation of water-conducting macropores by the maize roots. The VGM model adequately described the water retention curve (WRC) for these soils, but not the hydraulic conductivity (K) vs tension (h) curve. The ROSETTA function failed in the estimation of these parameters. In summary, mean values of K0 ranged from 0.74 to 3.88 cm h-1. In studies on NT effects on soil physical properties, the crop effect must be considered.

scholarly journals Surface lime and silicate application and crop production system effects on physical characteristics of a Brazilian Oxisol

Soil Research ◽  
2017 ◽  
Vol 55 (8) ◽  
pp. 778
Author(s):  
G. S. A. Castro ◽  
C. A. C. Crusciol ◽  
C. A. Rosolem ◽  
J. C. Calonego ◽  
K. R. Brye
Keyword(s):  
Physical Properties ◽  
Bulk Density ◽  
Production System ◽  
Crop Production ◽  
Management Practices ◽  
Production Systems ◽  
Crop Productivity ◽  
Soil Physical Properties ◽  
Physical Characteristics ◽  
Forage Crop

This work aimed to evaluate the effects of crop rotations and soil acidity amelioration on soil physical properties of an Oxisol (Rhodic Ferralsol or Red Ferrosol in the Australian Soil Classification) from October 2006 to September 2011 in Botucatu, SP, Brazil. Treatments consisted of four soybean (Glycine max)–maize (Zea mays)–rice (Oryza sativa) rotations that differed in their off-season crop, either a signal grass (Urochloa ruziziensis) forage crop, a second crop, a cover crop, or fallow. Two acid-neutralising materials, dolomitic lime (effective calcium carbonate equivalent (ECCE) = 90%) and calcium-magnesium silicate (ECCE = 80%), were surface applied to raise the soil’s base saturation to 70%. Selected soil physical characteristics were evaluated at three depths (0–0.1, 0.1–0.2, and 0.2–0.4 m). In the top 0.1 m, soil bulk density was lowest (P < 0.05) and macroporosity and aggregate stability index were greatest (P < 0.05) in the forage crop compared with all other production systems. Also, bulk density was lower (P < 0.05) and macroporosity was greater (P < 0.05) in the acid-neutralising-amended than the unamended control soil. In the 0.1–0.2-m interval, mean weight diameter and mean geometric diameter were greater (P < 0.05) in the forage crop compared with all other production systems. All soil properties evaluated in this study in the 0.2–0.4-m interval were unaffected by production system or soil amendment after five complete cropping cycles. Results of this study demonstrated that certain soil physical properties can be improved in a no-tillage soybean–maize–rice rotation using a forage crop in the off-season and with the addition of acid-neutralising soil amendments. Any soil and crop management practices that improve soil physical properties will likely contribute to sustaining long-term soil and crop productivity in areas with highly weathered, organic matter-depleted, acidic Oxisols.

scholarly journals Characterizing Soil Physical Properties for Soil Moisture Monitoring with the North Carolina Environment and Climate Observing Network

2012 ◽  
Vol 29 (7) ◽  
pp. 933-943 ◽  
Author(s):  
Weinan Pan ◽  
R. P. Boyles ◽  
J. G. White ◽  
J. L. Heitman
Keyword(s):  
North Carolina ◽  
Soil Moisture ◽  
Physical Properties ◽  
Soil Properties ◽  
Water Content ◽  
Bulk Density ◽  
Soil Physical Properties ◽  
The North ◽  
Wide Range ◽  
Soil Moisture Monitoring

Abstract Soil moisture has important implications for meteorology, climatology, hydrology, and agriculture. This has led to growing interest in development of in situ soil moisture monitoring networks. Measurement interpretation is severely limited without soil property data. In North Carolina, soil moisture has been monitored since 1999 as a routine parameter in the statewide Environment and Climate Observing Network (ECONet), but with little soils information available for ECONet sites. The objective of this paper is to provide soils data for ECONet development. The authors studied soil physical properties at 27 ECONet sites and generated a database with 13 soil physical parameters, including sand, silt, and clay contents; bulk density; total porosity; saturated hydraulic conductivity; air-dried water content; and water retention at six pressures. Soil properties were highly variable among individual ECONet sites [coefficients of variation (CVs) ranging from 12% to 80%]. This wide range of properties suggests very different behavior among sites with respect to soil moisture. A principal component analysis indicated parameter groupings associated primarily with soil texture, bulk density, and air-dried water content accounted for 80% of the total variance in the dataset. These results suggested that a few specific soil properties could be measured to provide an understanding of differences in sites with respect to major soil properties. The authors also illustrate how the measured soil properties have been used to develop new soil moisture products and data screening for the North Carolina ECONet. The methods, analysis, and results presented here have applications to North Carolina and for other regions with heterogeneous soils where soil moisture monitoring is valuable.

Cropping system influences on soil physical properties in the Great Plains

2006 ◽  
Vol 21 (1) ◽  
pp. 15-25 ◽  
Author(s):  
J.L. Pikul ◽  
R.C. Schwartz ◽  
J.G. Benjamin ◽  
R.L. Baumhardt ◽  
S. Merrill
Keyword(s):  
Physical Properties ◽  
Cropping Systems ◽  
Aggregate Size ◽  
Cropping System ◽  
Soil Physical Properties ◽  
Water Infiltration ◽  
Soil Conditions ◽  
System Effect ◽  
Near Surface ◽  
Infiltration Rates

AbstractAgricultural systems produce both detrimental and beneficial effects on soil quality (SQ). We compared soil physical properties of long-term conventional (CON) and alternative (ALT) cropping systems near Akron, Colorado (CO); Brookings, South Dakota (SD); Bushland, Texas (TX); Fargo, North Dakota (ND); Mandan (ND); Mead, Nebraska (NE); Sidney, Montana (MT); and Swift Current, Saskatchewan (SK), Canada. Objectives were to quantify the changes in soil physical attributes in cropping systems and assess the potential of individual soil attributes as sensitive indicators of change in SQ. Soil samples were collected three times per year from each treatment at each site for one rotation cycle (4 years at Brookings and Mead). Water infiltration rates were measured. Soil bulk density (BD) and gravimetric water were measured at 0–7.5, 7.5–15, and 15–30 cm depth increments and water-filled pore space ratio (WFPS) was calculated. At six locations, a rotary sieve was used to separate soil (top 5 cm) into six aggregate size groups and calculate mean weight diameter (MWD) of dry aggregates. Under the CON system at Brookings, dry aggregates (>19 mm) abraded into the smallest size class (<0.4 mm) on sieving. In contrast, the large aggregates from the ALT system abraded into size classes between 2 and 6 mm. Dry aggregate size distribution (DASD) shows promise as an indicator of SQ related to susceptibility of soil to wind erosion. Aggregates from CON were least stable in water. Soil C was greater under ALT than CON for both Brookings and Mead. At other locations, MWD of aggregates under continuous crop or no tillage (ALT systems) was greater than MWD under CON. There was no crop system effect on water infiltration rates for locations having the same tillage within cropping system. Tillage resulted in increased, decreased, or unchanged near-surface BD. Because there was significant temporal variation in water infiltration, MWD, and BD, conclusions based on a single point-in-time observation should be avoided. Elevated WFPS at Fargo, Brookings, and Mead may have resulted in anaerobic soil conditions during a portion of the year. Repeated measurements of WFPS or DASD revealed important temporal characteristics of SQ that could be used to judge soil condition as affected by management.

Sign in / Sign up

Export Citation Format

Share Document