scholarly journals Preparation and Biological Evaluation of Silybin Liposomes for the Treatment of Liver Disorders

2021 ◽  
pp. 186-200
Author(s):  
Saijyosthana Gandey ◽  
Vema Aparna ◽  
Raghupathi Kandarapu
Keyword(s):  
Drug Release ◽  
Phosphatidyl Choline ◽  
Animal Studies ◽  
Encapsulation Efficiency ◽  
In Vitro Release ◽  
Biological Evaluation ◽  
Sustained Drug Release ◽  
Vesicle Size

Aim: The aim of the present study was to develop silybin liposome by incorporating phosphatidyl choline & cholesterol so as to increase its oral bioavailability and liver targeted enhanced hepatoprotection. Methodology: Thin film hydration technique was used for the development of liposomes by using phosphatidyl choline, cholesterol and drug. Liposomes were evaluated for vesicle size, zeta potential, PDI, encapsulation efficiency, surface morphology and in vitro drug release study. Further the optimized formulation was evaluated for APAP-induced alterations in liver and kidney function tests in rats and histopathological studies. Results: The results were promising with a sustained drug release of 80% within 20hrs, optimized vesicle size of 276nm and 89% encapsulation efficiency. The animal studies demonstrated superior hepatoprotective effect compared to silybin solution. Conclusion: The silybin liposomes showed better in-vitro release & in-vivo hepatoprotection along with better animal activity & improvement in histopathological changes as compared to silybin.

scholarly journals Formulation and evaluation of carvedilol microcapsules using Eudragit NE30D and sodium alginate

2013 ◽  
Vol 49 (4) ◽  
pp. 889-901 ◽  
Author(s):  
Trishna Bal ◽  
Shubhranshu Sengupta ◽  
Padala Narasimha Murthy
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Sodium Alginate ◽  
Encapsulation Efficiency ◽  
In Vitro Release ◽  
Kinetic Equations ◽  
Oral Feeding ◽  
Primary Role

Inclusion complexes of carvedilol(CR) with hydroxyl propyl beta-cyclodextrin (HPBCD) was prepared using co-grinding technique. Then, the inclusion complex was microencapsulated using combinations of Eudragit NE30D (EU) and sodium alginate (SA) utilizing orifice gelation technique. The formulations were analysed by using Scanning electron microscopy (SEM), Fourier Transform Infrared spectroscopy (FTIR), Differential scanning Calorimetry (DSC) and X-ray diffractometer (XRD) and also evaluated for particle size, encapsulation efficiency, production yield, swelling capacity, mucoadhesive properties, zeta potential and drug release. The microcapsules were smooth and showed no visible cracks and extended drug release of 55.2006% up to 12 hours in phosphate buffer of pH 6.8, showing particle size within the range of 264.5-358.5 µm, and encapsulation efficiency of 99.337±0.0100-66.2753±0.0014%.The in vitro release data of optimized batch of microcapsules were plotted in various kinetic equations to understand the mechanisms and kinetics of drug release, which followed first order kinetics, value of "n" is calculated to be 0.459 and drug release was diffusion controlled. The mice were fed with diet for inducing high blood pressure and the in vivo antihypertensive activity of formulations was carried out administering the optimized formulations and pure drug separately by oral feeding and measured by B.P Monwin IITC Life Science instrument and the results indicated that the bioavailability of carvedilol was increased both in vitro and in vivo with the mucoadhesive polymers showing primary role in retarding the drug release.

scholarly journals Comparative Analysis of Morphological and Release Profiles in Ocular Implants of Acetazolamide Prepared by Electrospinning

Pharmaceutics ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 260
Author(s):  
Mariana Morais ◽  
Patrícia Coimbra ◽  
Maria Eugénia Pina
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Morbidity Rate ◽  
Coating Film ◽  
Sustained Drug Release ◽  
Coated Implant ◽  
Poly Ethylene ◽  
Coaxial Fibers ◽  
Release Profiles

The visual impairment that often leads to blindness causes a higher morbidity rate. The goal of this work is to create a novel biodegradable polymeric implant obtained from coaxial fibers containing the dispersed drug—acetazolamide—in order to achieve sustained drug release and increase patient compliance, which is of the highest importance. Firstly, during this work, uncoated implants were produced by electrospinning, and rolled in the shape of small cylinders that were composed of uniaxial and coaxial fibers with immobilized drug inside. The fibers were composed by PCL (poly ε-caprolactone) and Lutrol F127 (poly (oxyethylene-b-oxypropylene-b-oxyethylene)). The prepared implants exhibited a fast rate of drug release, which led to the preparation of new implants incorporating the same formulation but with an additional coating film prepared by solvent casting and comprising PCL and Lutrol F127 or PCL and Luwax EVA 3 ((poly (ethylene-co-vinyl acetate)). Implants were characterized and in vitro release profiles of acetazolamide were obtained in phosphate buffered saline (PBS) at 37 °C. The release profile of the acetazolamide from coated implant containing Luwax EVA 3 is considerably slower than what was observed in case of coated implants containing Lutrol F127, allowing a sustained release and an innovation relatively to other ocular drug delivery systems.

Formulation development of folic acid conjugated PLGA nanoparticles for improved cytotoxicity of Caffeic acid phenethyl ester

2021 ◽  
Vol 09 ◽  
Author(s):  
Harshad S Kapare ◽  
Sathiyanarayanan L ◽  
Arulmozhi S ◽  
Kakasaheb Mahadik
Keyword(s):  
Folic Acid ◽  
Drug Release ◽  
Caffeic Acid ◽  
Caffeic Acid Phenethyl Ester ◽  
Therapeutic Effects ◽  
Formulation Development ◽  
Sustained Drug Release ◽  
Active Constituent

Background: Honey bee propolis is one of the natural product reported in various traditional systems of medicines including Ayurveda. Caffeic acid phenethyl ester (CAPE) is an active constituent of propolis which is well known for its anticancer potential. The therapeutic effects of CAPE are restricted owing to its less aqueous solubility and low bioavailability. Objective: In this study CAPE loaded folic acid conjugated nanoparticle system (CLFPN) was investigated to enhance solubility, achieve sustained drug release and improved cytotoxicity of CAPE. Methods: Formulation development, characterization and optimization were carried out by design of experiment approach. In vitro and in vivo cytotoxicity study was carried out for optimized formulations. Results: Developed nanoparticles showed particle size and encapsulation efficiency of 170 ± 2 - 195 ± 3 nm and 75.66 ± 1.52 - 78.80 ± 1.25 % respectively. Optimized formulation CLFPN showed sustained drug release over a period of 42 h. GI50 concentration was decreased by 46.09% for formulation as compared to CAPE in MCF-7 cells indicating targeting effect of CLFPN. An improved in vitro cytotoxic effect was reflected in in-vivo Daltons Ascites Lymphoma model by reducing tumor cells count. Conclusion: The desired nanoparticle characteristic with improved in vivo and in vitro cytotoxicity was shown by developed formulation. Thus it can be further investigated for biomedical applications.

scholarly journals DESIGN AND IN VITRO/IN VIVO EVALUATION OF EXTENDED RELEASE MATRIX TABLETS OF NATEGLINIDE

2018 ◽  
Vol 7 (6) ◽  
Author(s):  
Mohini Sihare ◽  
Rajendra Chouksey
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release Profile ◽  
Matrix Tablets ◽  
In Vivo Studies ◽  
Release Mechanism ◽  
In Vivo Evaluation

Aim: Nateglinide is a quick acting anti-diabetic medication whose potent activity lasts for a short duration. One of the dangerous side effects of nateglinide administration is rapid hypoglycemia, a condition that needs to be monitored carefully to prevent unnecessary fatalities. The aim of the study was to develop a longer lasting and slower releasing formulation of nateglinide that could be administered just once daily. Methods: Matrix tablets of nateglinide were prepared in combination with the polymers hydroxypropylmethylcellulose (HPMC), eudragits, ethyl cellulose and polyethylene oxide and the formulated drug release patterns were evaluated using in vitro and in vivo studies. Conclusion: Of the seventeen formulated matrix tablets tested, only one formulation labelled HA-2 that contained 15% HPMC K4M demonstrated release profile we had aimed for. Further, swelling studies and scanning electron microscopic analysis confirmed the drug release mechanism of HA-2. The optimized formulation HA-2 was found to be stable at accelerated storage conditions for 3 months with respect to drug content and physical appearance. Mathematical analysis of the release kinetics of HA-2 indicated a coupling of diffusion and erosion mechanisms. In-vitro release studies and pharmacokinetic in vivo studies of HA-2 in rabbits confirmed the sustained drug release profile we had aimed for. Keywords: Hydroxypropylmethylcellulose, Matrix tablets, Nateglinide, Sustained release

scholarly journals Formulation, Development and Evaluation of Ibuprofen Loaded Nano-transferosomal Gel for the Treatment of Psoriasis

2019 ◽  
pp. 1-8
Author(s):  
Marwa H. Abdallah ◽  
Amr S. Abu Lila ◽  
Md. Khalid Anwer ◽  
El-Sayed Khafagy ◽  
Muqtader Mohammad ◽  
...  
Keyword(s):  
Drug Release ◽  
Zeta Potential ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Formulation Development ◽  
In Vitro Drug Release ◽  
Vesicle Size

The present work was aimed to develop a transferosomal gel of ibuprofen (IBU) for the amelioration of psoriasis like inflammation. Three formulation of IBU loaded transferosomes (TFs1-TFs3) were prepared using different proportions of lipid (phospholipon 90H) and surfactant (tween 80) and further evaluated for vesicle size, zeta potential (ZP), entrapment efficiency and in vitro drug release. The IBU loaded transferosomes (TFs2) was optimized with vesicle size (217±8.4 nm), PDI (0.102), ZP (-31.5±4.3 mV), entrapment efficiency (88.4±6.9%) and drug loading (44.2±2.9%). Further, the optimized IBU loaded transferosomes (TFs2) was incorporated into 1% carbopol 934 gel base and characterized for homogeneity, extrudability, viscosity and drug content. The in vivo pharmacodynamic study of gel exhibited reduction in psoriasis like inflammation in mice. The ibuprofen loaded transferosomal gel was successfully developed and has shown the potential to be a new therapy against psoriasis like inflammation.

scholarly journals Design and evaluation of a novel floating osmotic pump system

2009 ◽  
Vol 12 (1) ◽  
pp. 129 ◽  
Author(s):  
Zhihong Zhang ◽  
Bo Peng ◽  
Xinggang Yang ◽  
Chao Wang ◽  
Guangmei Sun ◽  
...  
Keyword(s):  
Drug Release ◽  
Oral Administration ◽  
In Vitro Release ◽  
Osmotic Pump ◽  
Matrix Tablets ◽  
In Vivo Evaluation ◽  
Pump System ◽  
Conventional Tablet

PURPOSE. Find a novel delivery system for oral administration of drugs that have absorption window in the upper part of gastrointestinal (GI) track. METHODS. Dipyridamole was chosen as the model drug. A novel system, which combined the osmotic pump controlled release system and the floating system, was designed; matrix tablets (MT) were prepared for compares. The effects of pH, temperature and hydrodynamic conditions on drug release and the floating behavior of floating osmotic pump system (FOP) were investigated. In vivo evaluation was performed by a three-crossover study in six Beagle dogs relative to the conventional tablet (CT). Cumulative percent input in vivo was compared with that of in vitro release profiles. RESULTS. Floating behavior of FOP, drug releases from FOP and MT were sensitive to pH of dissolution media but not sensitive to temperature; the release of dipyridamole from MT was influenced by stirring rate while drug release from FOP was not. AUC of FOP was larger than MT and CT. The linear correlations between fraction absorbed in vivo and fraction dissolved in vitro was established for FOP-a true zero-order release formula, whereas only a nonlinear correlation was obtained for MT. CONCLUTIONS. FOP could be a novel way for the oral administration for drugs like dipyridamole.

Plasmonic CuS nanodisk assembly based composite nanocapsules for NIR-laser-driven synergistic chemo-photothermal cancer therapy

2018 ◽  
Vol 6 (7) ◽  
pp. 1035-1043 ◽  
Author(s):  
Jian He ◽  
Lisha Ai ◽  
Xin Liu ◽  
Hao Huang ◽  
Yuebin Li ◽  
...  
Keyword(s):  
Cancer Therapy ◽  
Drug Release ◽  
Cancer Cells ◽  
Therapeutic Effects ◽  
Release Behavior ◽  
Sustained Drug Release ◽  
Drug Release Behavior ◽  
Nir Laser

The NIR-laser-driven plasmonic photothermal and sustained drug release behavior of CuS–PTX/SiO2 nanocapsules show great synergistic chemo-photothermal therapeutic effects on cancer cells in vitro and in vivo.

scholarly journals ENHANCEMENT OF DISSOLUTION CHARACTERISTICS OF CLOPIDOGREL BISULPHATE BY PRONIOSOMES

2019 ◽  
pp. 77-85 ◽  
Author(s):  
EMAN A. MAZYED ◽  
SHERIN ZAKARIA
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
International Normalized Ratio ◽  
Angle Of Repose ◽  
Morphological Examination ◽  
Span 60

Objective: The present investigation aims to formulate and evaluate proniosomes of clopidogrel bisulphate for improving its dissolution characteristics. Methods: The slurry method was used for the preparation of proniosomes of clopidogrel using cholesterol, sorbitan monostearate (Span 60) and maltodextrin as a carrier. Clopidogrel proniosomes were evaluated for their entrapment efficiency and in vitro drug release. The best formula (F1) that achieved maximum drug release was further evaluated by measurement of the angle of repose, morphological examination, determination of vesicle size, determination of zeta potential, Fourier transform infrared spectroscopy and differential thermal analysis. The in vivo behavior of the selected proniosomal formula (F1) was studied by measuring the antiplatelet activity in adult male mice. Results: The entrapment efficiency of clopidogrel proniosomes was in the range of 83.04±1.99 to 90.14±0.30. % drug released from proniosomal formulations was in the range of 79.73±0.35 to 97.70±1.10 % within 4 h. Clopidogrel proniosomes significantly enhanced the in vitro release of clopidogrel compared with the plain drug that achieved 61.77±2.22 % drug release. F1 significantly (p ≤ 0.001) increased the bleeding time and bleeding volume and significantly (p ≤ 0.05) prolonged prothrombin time and decreased prothrombin activity and increased the international normalized ratio (INR) compared to plain clopidogrel. Conclusion: The present investigation introduced proniosomes as a promising carrier for clopidogrel that could enhance its dissolution and pharmacological effect.

Formulation and in vitro evaluation of upconversion nanoparticle-loaded liposomes for brain cancer

2020 ◽  
Vol 11 (9) ◽  
pp. 557-571 ◽  
Author(s):  
Narendra ◽  
Abhishesh Kumar Mehata ◽  
Matte Kasi Viswanadh ◽  
Roshan Sonkar ◽  
Datta Maroti Pawde ◽  
...  
Keyword(s):  
Drug Release ◽  
Encapsulation Efficiency ◽  
Glioma Cells ◽  
C6 Glioma Cells ◽  
Upconversion Nanoparticles ◽  
Clinical Validation ◽  
In Vivo Evaluation ◽  
In Vitro Drug Release

Aim: This work focused on the development of transferrin-conjugated theranostic liposomes consisting of docetaxel (DXL) and upconversion nanoparticles for the diagnosis and treatment of gliomas. Materials & methods: Upconversion nanoparticles and docetaxel-loaded theranostic liposomes were prepared by a solvent injection method. Formulations were analyzed for physicochemical properties, encapsulation efficiency, drug release, elemental analysis, cytotoxicity and fluorescence. Results: The particle size was around 200 nm with spherical morphology and an encapsulation efficiency of up to 75.93%, was achieved for liposomes with an in vitro drug release of 71.10%. The IC50 values demonstrated enhanced cytotoxicity on C6 glioma cells with targeted liposomes in comparison with nontargeted liposomes. Conclusion: Prepared theranostic liposomes may be promising for clinical validation after an in vitro and in vivo evaluation on cell lines and animals, respectively.

Sign in / Sign up

Export Citation Format

Share Document