scholarly journals Formulation and evaluation of carvedilol microcapsules using Eudragit NE30D and sodium alginate

2013 ◽  
Vol 49 (4) ◽  
pp. 889-901 ◽  
Author(s):  
Trishna Bal ◽  
Shubhranshu Sengupta ◽  
Padala Narasimha Murthy
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Sodium Alginate ◽  
Encapsulation Efficiency ◽  
In Vitro Release ◽  
Kinetic Equations ◽  
Oral Feeding ◽  
Primary Role

Inclusion complexes of carvedilol(CR) with hydroxyl propyl beta-cyclodextrin (HPBCD) was prepared using co-grinding technique. Then, the inclusion complex was microencapsulated using combinations of Eudragit NE30D (EU) and sodium alginate (SA) utilizing orifice gelation technique. The formulations were analysed by using Scanning electron microscopy (SEM), Fourier Transform Infrared spectroscopy (FTIR), Differential scanning Calorimetry (DSC) and X-ray diffractometer (XRD) and also evaluated for particle size, encapsulation efficiency, production yield, swelling capacity, mucoadhesive properties, zeta potential and drug release. The microcapsules were smooth and showed no visible cracks and extended drug release of 55.2006% up to 12 hours in phosphate buffer of pH 6.8, showing particle size within the range of 264.5-358.5 µm, and encapsulation efficiency of 99.337±0.0100-66.2753±0.0014%.The in vitro release data of optimized batch of microcapsules were plotted in various kinetic equations to understand the mechanisms and kinetics of drug release, which followed first order kinetics, value of "n" is calculated to be 0.459 and drug release was diffusion controlled. The mice were fed with diet for inducing high blood pressure and the in vivo antihypertensive activity of formulations was carried out administering the optimized formulations and pure drug separately by oral feeding and measured by B.P Monwin IITC Life Science instrument and the results indicated that the bioavailability of carvedilol was increased both in vitro and in vivo with the mucoadhesive polymers showing primary role in retarding the drug release.

scholarly journals FORMULATION AND EVALUATION OF CURCUMIN LOADED LIPOSOME AND ITS BIO-ENHANCEMENT

2019 ◽  
Vol 9 (4-A) ◽  
pp. 425-437
Author(s):  
Khushboo Verma ◽  
Jhakeshwar Prasad ◽  
Suman Saha ◽  
Surabhi Sahu
Keyword(s):  
Thin Film ◽  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
High Performance ◽  
Encapsulation Efficiency ◽  
Mean Particle Size ◽  
Liposome Formulation

The aim of this work was to develop and evaluate curcumin loaded liposome and its bio- enhancement. Curcumin was selected as a natural drug for liposome formulation. Curcumin show variety of biological activity but it also shows poor bioavailability due to low aqueous solubility (1 µg/ml), poor absorption and rapid metabolism so that piperine was selected as bio enhancer to improve curcumin bioavailability. Soy lecithin and cholesterol were used to prepared curcumin and curcumin-piperine loaded liposome at different ratio by thin film hydration method because of easy to perform, and high encapsulation rates of lipid. The all liposome formulations (F1-F5) were evaluated by mean particle size, polydispersity index, zeta potential, encapsulation efficiency and drug release. Bioavailability was also determined on rat. Blood samples were collected at specific intervals, and plasma was separated by ultracentrifugation. Plasma was analyzed by high-performance liquid chromatography at 425 nm taking acetonitrile: water (75:25 v/v) acidified with 2% acetic acid as a mobile phase at a flow rate of 0.5 ml/min using C18 column. The mean particle size was found in the range between 800-1100 that indicate liposome are large unilamellar vesical types. By zeta potential study its conform that the all formulation was stable. The encapsulation efficiency of all liposome formulation are varied between 59-67%. In vitro drug release was analyse in 7.4 pH phosphate buffer, the maximum %CDR observed at the 12 hrs., and formulation are follow sustained release thus they reduce metabolism, good absorption rate which improve bioavailability of drug. From in-vivo study, it is clear that curcumin-piperine liposomal formulation, increases Cmax, area under the curve, and mean residence time significantly as compared to pure curcumin and pure curcumin liposome. Keywords: liposome; Curcumin; Piperine, Thin film hydration method; Bioavailability

Formulation and evaluation of resveratrol loaded cubosomal nanoformulation for topical delivery

2020 ◽  
Vol 17 ◽  
Author(s):  
Bhaskar Kurangi ◽  
Sunil Jalalpure ◽  
Satveer Jagwani
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Topical Application ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Drug Permeation

Aim: The aim of the study was to formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC) through topical application. Background: Resveratrol (RV) is a nutraceutical compound that has exciting pharmacological potential in different diseases including cancers. Many studies of resveratrol have been reported for anti-melanoma activity. Due to its low bioavailability, the activities of resveratrol are strongly limited. Hence, an approach with nanotechnology has been done to increase its activity through transdermal drug delivery. Objective: To formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC). To evaluate resveratrol-loaded cubosomal gel (RC-Gel) for its topical application. Methods: RC was formulated by homogenization technique and optimized using a 2-factor 3-level factorial design. Formulated RCs were characterized for particle size, zeta potential, and entrapment efficiency. Optimized RC was evaluated for in vitro release and stability study. Optimized RC was further formulated into cubosomal gel (RC-Gel) using carbopol and evaluated for drug permeation and deposition. Furthermore, developed RC-Gel was evaluated for its topical application using skin irritancy, toxicity, and in vivo local bioavailability studies. Results: The optimized RC indicated cubic-shaped structure with mean particle size, entrapment efficiency, and zeta potential were 113±2.36 nm, 85.07 ± 0.91%, and -27.40 ± 1.40 mV respectively. In vitro drug release of optimized RC demonstrated biphasic drug release with the diffusion-controlled release of resveratrol (RV) (87.20 ± 2.25%). The RC-Gel demonstrated better drug permeation and deposition in mice skin layers. The composition of RC-Gel has been proved non-irritant to the mice skin. In vivo local bioavailability study depicted the good potential of RC-Gel for skin localization. Conclusion: The RC nanoformulation proposes a promising drug delivery system for melanoma treatment simply through topical application.

scholarly journals Preparation and Biological Evaluation of Silybin Liposomes for the Treatment of Liver Disorders

2021 ◽  
pp. 186-200
Author(s):  
Saijyosthana Gandey ◽  
Vema Aparna ◽  
Raghupathi Kandarapu
Keyword(s):  
Drug Release ◽  
Phosphatidyl Choline ◽  
Animal Studies ◽  
Encapsulation Efficiency ◽  
In Vitro Release ◽  
Biological Evaluation ◽  
Sustained Drug Release ◽  
Vesicle Size

Aim: The aim of the present study was to develop silybin liposome by incorporating phosphatidyl choline & cholesterol so as to increase its oral bioavailability and liver targeted enhanced hepatoprotection. Methodology: Thin film hydration technique was used for the development of liposomes by using phosphatidyl choline, cholesterol and drug. Liposomes were evaluated for vesicle size, zeta potential, PDI, encapsulation efficiency, surface morphology and in vitro drug release study. Further the optimized formulation was evaluated for APAP-induced alterations in liver and kidney function tests in rats and histopathological studies. Results: The results were promising with a sustained drug release of 80% within 20hrs, optimized vesicle size of 276nm and 89% encapsulation efficiency. The animal studies demonstrated superior hepatoprotective effect compared to silybin solution. Conclusion: The silybin liposomes showed better in-vitro release & in-vivo hepatoprotection along with better animal activity & improvement in histopathological changes as compared to silybin.

scholarly journals FABRICATION OF SODIUM ALGINATE/GUM GHATTI IPN MICROBEADS INTERCALATED WITH KAOLIN NANO CLAY FOR CONTROLLED RELEASE OF CURCUMIN

2021 ◽  
pp. 233-241
Author(s):  
D. GANESH ◽  
P. SURESH ◽  
G. SRINIVAS RAO
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Sodium Alginate ◽  
In Vitro Release ◽  
Kinetic Equations ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Nano Clay ◽  
Gum Ghatti

Objective: The objective of this study is to fabricate sodium alginate (SA)/gum ghatti (GG) microbeads intercalated with Kaolin (KA) nano clay for the sustained release of curcumin (CUR). Methods: The microbeads were prepared by a simple ionotropic gelation technique. The developed beads were characterized by fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (X-RD), and scanning electron microscopy (SEM). Swelling studies and in vitro release studies were investigated under both pH 7.4 and pH 1.2 at 37 °C. Results: The developed microbeads were characterized by FTIR, which confirms the interaction between CUR, polymeric matrix and KA. DSC and XRD analysis reveals that the CUR has molecularly dispersed in the polymer matrix. In vitro results illustrated that microbeads were influenced by the pH of test media, which might be suitable for intestinal drug delivery. The drug release mechanism was analyzed by fitting the release data into different kinetic equations and n values are obtained in the range of 0.609-0.640, suggesting that the developed microbeads showed the non-Fickian diffusion type drug release. Conclusion: These results clearly illustrated that the developed KA intercalated polymeric microbeads are potential drug carriers for the controlled release of CUR.

scholarly journals Development and Characterization of Mitoxantrone-Loaded Glutaraldehyde Crosslinked Sodium Alginate Nanoparticles for the Delivery of Anticancer Drugs

2021 ◽  
pp. 18-24
Author(s):  
Muhammad Wahab Amjad ◽  
Maria Abdul Ghafoor Raja
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Sodium Alginate ◽  
Anticancer Drugs ◽  
Antineoplastic Agent ◽  
Entrapment Efficiency ◽  
Sustained Drug Release ◽  
Drug Entrapment Efficiency

Every year millions of new cases of various types of cancers are diagnosed, leading to an alarming rate of fatalities. Mitoxantrone is an anthracenedione antineoplastic agent which is used in the treatment of various types of cancer, mostly acute myeloid leukemia and prostate cancer. In spite of its therapeutic applications, it possesses numerous limitations and side effects including specific targeting and systemic toxicity. Sodium alginate is a biodegradable, mucoadhesive and biocompatible polymer commonly used in drug delivery applications. Glutaraldehyde is a saturated dialdehyde and is used as a polymer cross linker. In this study, mitoxantrone-loaded glutaraldehyde-sodium alginate nanoparticles were developed by ionic gelation method and characterized (determination of particle size, drug entrapment efficiency, drug release and its kinetics) for the delivery of anticancer drugs. The nanoparticles mean particle size was found to be within the acceptable range. The entrapment efficiency was also on the higher side with sustained drug release. The findings of this study reveal promising potential of delivery system and project the way forward for further in vitro and in vivo investigations.

scholarly journals Optimization of Site-Specific Drug Delivery System of Tyrosine Kinase Inhibitor Using Response Surface Methodology

2021 ◽  
pp. 273-286
Author(s):  
S. Parimala Krishnan ◽  
Cinnayyagari Mahesh Reddy ◽  
Challa Balashekar Reddy
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Sodium Alginate ◽  
Calcium Chloride ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Site Specific ◽  
Box Behnken Design ◽  
Specific Formulation

Aims: The aim of present study was to develop a stomach specific formulation of Imatinibmesylate to increase the fraction of drug absorbed in stomach. Study Design: Development and Optimization of Microspheres for site specific delivery.. Place and Duration of Study: The study was carried out in Department of Pharmacy, Annamalai University, between October 2020 and July 2021. Methodology: Ionotropic gelation method with Sodium alginate and Chitosan were used to formulate the mucoadhesive microspheres with calcium chloride. The formulation was optimized using Box – Behnken design to study the effect of independent variables, Amount of Sodium Alginate (X1), Amount of Chitosan (X2) and concentration of Calcium Chloride (X3) on dependent variables Particle Size (Y1), Entrapment Efficiency (Y2) and In-vitro drug release (Y3). Results: Particle size of prepared microspheres varied from 458.25 to 810.75 μm, entrapment efficiency from 64.87 to 82.63% and in-vitro release from 69.22 to 83.50%. The optimized formulation was found using point prediction, and formulation showed optimum results. The drug release was controlled for more than 12 h. Conclusion: Stomach specific formulation of Imatinibmesylate was successfully optimized by a three-factor, three level Box – Behnken design.

Optimization and Characterization of Aqueous Micellar Formulations for Ocular Delivery of an Antifungal Drug, Posaconazole

2020 ◽  
Vol 26 (14) ◽  
pp. 1543-1555 ◽  
Author(s):  
Meltem E. Durgun ◽  
Emine Kahraman ◽  
Sevgi Güngör ◽  
Yıldız Özsoy
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Size Distribution ◽  
Encapsulation Efficiency ◽  
Fungal Infections ◽  
In Vitro Release ◽  
Pluronic F127 ◽  
Glycol Succinate ◽  
Vitro Release

Background: Topical therapy is preferred for the management of ocular fungal infections due to its superiorities which include overcoming potential systemic side effects risk of drugs, and targeting of drugs to the site of disease. However, the optimization of effective ocular formulations has always been a major challenge due to restrictions of ocular barriers and physiological conditions. Posaconazole, an antifungal and highly lipophilic agent with broad-spectrum, has been used topically as off-label in the treatment of ocular fungal infections due to its highly lipophilic character. Micellar carriers have the potential to improve the solubility of lipophilic drugs and, overcome ocular barriers. Objective: In the current study, it was aimed optimization of posaconazole loaded micellar formulations to improve aqueous solubility of posaconazole and to characterize the formulations and to investigate the physical stability of these formulations at room temperature (25°C, 60% RH), and accelerated stability (40°C, 75% RH) conditions. Method: Micelles were prepared using a thin-film hydration method. Pre-formulation studies were firstly performed to optimize polymer/surfactant type and to determine their concentration in the formulations. Then, particle size, size distribution, and zeta potential of the micellar formulations were measured by ZetaSizer Nano-ZS. The drug encapsulation efficiency of the micelles was quantified by HPLC. The morphology of the micelles was depicted by AFM. The stability of optimized micelles was evaluated in terms of particle size, size distribution, zeta potential, drug amount and pH for 180 days. In vitro release studies were performed using Franz diffusion cells. Results: Pre-formulation studies indicated that single D-ɑ-tocopheryl polyethylene glycol succinate (TPGS), a combination of it and Pluronic F127/Pluronic F68 are capable of formation of posaconazole loaded micelles at specific concentrations. Optimized micelles with high encapsulation efficiency were less than 20 nm, approximately neutral, stable, and in aspherical shape. Additionally, in vitro release data showed that the release of posaconazole from the micelles was higher than that of suspension. Conclusion: The results revealed that the optimized micellar formulation of posaconazole offers a potential approach for topical ocular administration.

scholarly journals 708 Application of a novel mSENS drug delivery technology for mRNA therapeutics

2020 ◽  
Vol 8 (Suppl 3) ◽  
pp. A750-A750
Author(s):  
Sojin Lee ◽  
Joon Young Park ◽  
Goo-Young Kim ◽  
Sang Woo Jo ◽  
Minhyuk Yun ◽  
...  
Keyword(s):  
Particle Size ◽  
Protein Expression ◽  
Cancer Vaccine ◽  
Encapsulation Efficiency ◽  
Tumor Model ◽  
Cell Responses ◽  
Delivery Platform ◽  
Mrna Therapeutics

BackgroundSuccessful clinical translation of mRNA therapeutics requires an appropriate delivery strategy to overcome instability of mRNA and facilitate cellular uptake into the cells.1 Several lipid based nanoparticle approaches that encapsulate mRNA, notably lipid nanoparticle (LNP), have been developed, but their efficiency for delivery to certain target tissues and toxicity profiles still have room for improvement. The application of a novel polymer based nanoparticle technology platform, so called Stability Enhanced Nano Shells (SENS) for mRNA (mSENS) as a mRNA delivery platform for a cancer vaccine was demonstrated.MethodsThe physicochemical properties of mSENS formulation, particle size and encapsulation efficiency, were characterized using dynamic light scattering (DLS) and gel retardation assay. Using luciferase-encoding mRNA, the protein expression levels in vitro and in vivo were evaluated by luciferase assay or bioluminescence imaging (BLI), respectively. For cancer vaccine studies, antigen (tyrosinase-related protein 2 (Trp-2))-specific T cell responses were assessed by immunophenotyping mouse splenocytes using flow cytometry and by the enzyme-linked immunosorbent spot (ELISPOT) assay. The anti-tumor efficacy was studied in B16F10 lung tumor model in C57BL/6 mice. Liver and systemic toxicity of mSENS treated mice was evaluated through blood chemistry and complete blood count (CBC) tests.ResultsA library of mSENS formulations complexed with luciferase-encoding mRNA, were characterized for their particle size, surface charge, encapsulation efficiency, colloidal stability, and in vitro and in vivo luciferase protein expression level. Upon systemic administration in mice, varying biodistribution profiles were observed, implicating the potential for tailored delivery to target tissues. Particularly, cancer vaccine application was further developed leveraging the formulation with preferential spleen delivery. Following vaccination with Trp-2 mRNA encapsulated with mSENS (Trp-2 mRNA-mSENS) in B16F10 tumor bearing mice, strong Trp-2 antigen-specific IFN-γ T-cell responses were observed. Generated anti-tumor immunity also marked suppression of B16F10 lung tumors were observed in Trp-2-mSENS immunized mice compared to non-immunized controls, demonstrating the potential of mSENS as a mRNA delivery platform for the application for vaccine.ConclusionsProprietary biodegradable polymer based-mSENS platform offers an attractive delivery strategy for mRNA by tailoring to specific therapeutic applications. Depending on the application, whether it’s a vaccine or protein replacement, a rationally designed mSENS formulation can efficiently distribute mRNA to specific tissues. In particular, application of a splenic mSENS formulation for a cancer vaccine has been demonstrated in murine tumor model. In summary, mRNA delivery through mSENS platform is expected to provide significant opportunities in clinical development for mRNA therapeutics.Ethics ApprovalThe study was approved by Samyang Biopharmaceuticals’ IACUC (Institutional Animal Care and Use Committee), approval number SYAU-2027.ReferencePiotr S. Kowalski, Arnab Rudra, Lei Miao, and Daniel G. Anderson, delivering the messenger: advances in technologies for therapeutic mRNA delivery. Molecular Therapy Vol. 27 No 4 April 2019.

scholarly journals DESIGN AND IN VITRO/IN VIVO EVALUATION OF EXTENDED RELEASE MATRIX TABLETS OF NATEGLINIDE

2018 ◽  
Vol 7 (6) ◽  
Author(s):  
Mohini Sihare ◽  
Rajendra Chouksey
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release Profile ◽  
Matrix Tablets ◽  
In Vivo Studies ◽  
Release Mechanism ◽  
In Vivo Evaluation

Aim: Nateglinide is a quick acting anti-diabetic medication whose potent activity lasts for a short duration. One of the dangerous side effects of nateglinide administration is rapid hypoglycemia, a condition that needs to be monitored carefully to prevent unnecessary fatalities. The aim of the study was to develop a longer lasting and slower releasing formulation of nateglinide that could be administered just once daily. Methods: Matrix tablets of nateglinide were prepared in combination with the polymers hydroxypropylmethylcellulose (HPMC), eudragits, ethyl cellulose and polyethylene oxide and the formulated drug release patterns were evaluated using in vitro and in vivo studies. Conclusion: Of the seventeen formulated matrix tablets tested, only one formulation labelled HA-2 that contained 15% HPMC K4M demonstrated release profile we had aimed for. Further, swelling studies and scanning electron microscopic analysis confirmed the drug release mechanism of HA-2. The optimized formulation HA-2 was found to be stable at accelerated storage conditions for 3 months with respect to drug content and physical appearance. Mathematical analysis of the release kinetics of HA-2 indicated a coupling of diffusion and erosion mechanisms. In-vitro release studies and pharmacokinetic in vivo studies of HA-2 in rabbits confirmed the sustained drug release profile we had aimed for. Keywords: Hydroxypropylmethylcellulose, Matrix tablets, Nateglinide, Sustained release

scholarly journals Sodium Alginate Nanoparticles of Isoniazid: Preparation and Evaluation

2019 ◽  
Vol 11 (06) ◽  
Author(s):  
Sumit Kumar ◽  
Dinesh Chandra Bhatt
Keyword(s):  
Particle Size ◽  
Sodium Alginate ◽  
Encapsulation Efficiency ◽  
Drug Loading ◽  
Average Particle Size ◽  
Average Particle ◽  
In Vitro Drug Release ◽  
Ionotropic Gelation ◽  
Preparation And Evaluation

Fabrication and evaluation of the Isoniazid loaded sodium alginate nanoparticles (NPs) was main objective of current investigation. These NPs were engineered using ionotropic gelation technique. The NPs fabricated, were evaluated for average particle size, encapsulation efficiency, drug loading, and FTIR spectroscopy along with in vitro drug release. The particle size, drug loading and encapsulation efficiency of fabricated nanoparticles were ranging from 230.7 to 532.1 nm, 5.88% to 11.37% and 30.29% to 59.70% respectively. Amongst all batches studied formulation F-8 showed the best sustained release of drug at the end of 24 hours.

Sign in / Sign up

Export Citation Format

Share Document