Formulation and in vitro evaluation of upconversion nanoparticle-loaded liposomes for brain cancer

2020 ◽  
Vol 11 (9) ◽  
pp. 557-571 ◽  
Author(s):  
Narendra ◽  
Abhishesh Kumar Mehata ◽  
Matte Kasi Viswanadh ◽  
Roshan Sonkar ◽  
Datta Maroti Pawde ◽  
...  
Keyword(s):  
Drug Release ◽  
Encapsulation Efficiency ◽  
Glioma Cells ◽  
C6 Glioma Cells ◽  
Upconversion Nanoparticles ◽  
Clinical Validation ◽  
In Vivo Evaluation ◽  
In Vitro Drug Release

Aim: This work focused on the development of transferrin-conjugated theranostic liposomes consisting of docetaxel (DXL) and upconversion nanoparticles for the diagnosis and treatment of gliomas. Materials & methods: Upconversion nanoparticles and docetaxel-loaded theranostic liposomes were prepared by a solvent injection method. Formulations were analyzed for physicochemical properties, encapsulation efficiency, drug release, elemental analysis, cytotoxicity and fluorescence. Results: The particle size was around 200 nm with spherical morphology and an encapsulation efficiency of up to 75.93%, was achieved for liposomes with an in vitro drug release of 71.10%. The IC50 values demonstrated enhanced cytotoxicity on C6 glioma cells with targeted liposomes in comparison with nontargeted liposomes. Conclusion: Prepared theranostic liposomes may be promising for clinical validation after an in vitro and in vivo evaluation on cell lines and animals, respectively.

Design and In vivo Evaluation of Palonosetron HCl Mouth Dissolving Films in the Management of Chemotherapy-Induced Vomiting

2017 ◽  
Vol 10 (6) ◽  
pp. 3929-3936
Author(s):  
Y. Srinivasa Rao ◽  
K. Adinarayana Reddy
Keyword(s):  
Drug Release ◽  
Patient Compliance ◽  
Onset Of Action ◽  
In Vivo Evaluation ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Surface Ph ◽  
Drug Content

Fast dissolving oral delivery systems are solid dosage forms, which disintegrate or dissolve within 1 minute in the mouth without drinking water or chewing. Mouth dissolving film (MDF) is a better alternate to oral disintegrating tablets due to its novelty, ease of use and the consequent patient compliance. The purpose of this work was to develop mouth dissolving oral films of palonosetron HCl, an antiemetic drug especially used in the prevention and treatment of chemotherapy-induced nausea and vomiting. In the present work, the films were prepared by using solvent casting method with various polymers HPMC E3, E5 & E15 as a film base synthetic polymer, propylene glycol as a plasticizer and maltodextrin and other polymers. Films were found to be satisfactory when evaluated for thickness, in vitro drug release, folding endurance, drug content and disintegration time. The surface pH of all the films was found to be neutral. The in vitro drug release of optimized formulation F29 was found to be 99.55 ± 6.3 7% in 7 min. The optimized formulation F29 also showed satisfactory surface pH, drug content (99.38 ± 0.08 %), disintegration time of 8 seconds and good stability. FTIR data revealed that no interaction takes place between the drug and polymers used in the optimized formulation. In vitro and in vivo evaluation of the films confirmed their potential as an innovative dosage form to improve delivery and quick onset of action of Palonosetron Hydrochloride. Therefore, the mouth dissolving film of palonosetron is potentially useful for the treatment of emesis disease where quick onset of action is desired, also improved patient compliance.

Formulation and In Vivo Evaluation of Mucoadhesive Micro-spheres of Rebamipide, a Mucoprotective Drug for GIT Disorders

2018 ◽  
Vol 11 (3) ◽  
pp. 4089-4097
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Kanteepan P
Keyword(s):  
Drug Release ◽  
Entrapment Efficiency ◽  
In Vivo Studies ◽  
Amino Acid Derivative ◽  
Release Mechanism ◽  
In Vivo Evaluation ◽  
In Vitro Drug Release ◽  
Percentage Yield

Rebamipide, an amino acid derivative of 2-(1H)-quinolinone, is used for mucosal protection, healing of gastroduodenal ulcers, and treatment of gastritis. The current research study aimed to develop novel gastro-retentive mucoadhesive microspheres of rebamipide using ionotropic gelation technique. Studies of micromeritic properties confirmed that microspheres were free flowing with good packability. The in vitro drug release showed the sustained release of rebamipide up to 99.23 ± 0.13% within 12 h whereas marketed product displayed the drug release of 95.15 ± 0.23% within 1 h. The release mechanism from microspheres followed the zero-order and Korsmeyer-Peppas (R2 = 0.915, 0.969), respectively. The optimized M12 formulation displayed optimum features, such as entrapment efficiency 97%, particle size 61.94 ± 0.11 µm, percentage yield 98%, swelling index 95% and mucoadhesiveness was 97%. FTIR studies revealed no major incompatibility between drug and excipients. SEM confirmed the particles were of spherical in shape. Optimized formulation (M12) were stable at 40°C ± 2°C/75% RH ± 5% RH for 6 months. In vivo studies were performed and kinetic parameters like Cmax, Tmax, AUC0-t, AUC0-∞, t1/2, and Kel  were calculated. The marketed product Cmax (3.15 ± 0.05 ng/mL) was higher than optimized formulation (2.58 ± 0.03 ng/mL). The optimized formulation AUC0-t (15.25 ± 1.14 ng.hr/mL), AUC0-∞ (19.42 ± 1.24 ng.hr/mL) was significantly higher than that of marketed product AUC0-t (10.21 ± 1.26 ng.hr/mL) and AUC0-∞ (13.15 ± 0.05 ng.hr/mL). These results indicate an optimized formulation bioavailability of 2.5-fold greater than marketed product.  

Development and In Vivo Evaluation of Mesalazine Colon Targeted Tablets

2019 ◽  
Vol 12 (3) ◽  
pp. 4552-4558
Author(s):  
Rawoof MD ◽  
Rajnarayana K ◽  
Ajitha M
Keyword(s):  
Drug Release ◽  
Wet Granulation ◽  
Time Intervals ◽  
In Vivo Evaluation ◽  
In Vitro Drug Release ◽  
Release Studies ◽  
Ph Dependent ◽  
Rapid Hydrolysis

The main objective of the present study was to develop colon-targeted tablets of mesalazine by wet granulation method using 33 Response surface method with design of experiment software and HPMC K4M, Eudragit RL100, Ethyl cellulose and PVP K-30 used as pH dependent polymers. All the formulations (F1 to F27) were evaluated for the physicochemical parameters and were subjected to in vitro drug release studies. The amount of Mesalazine released from tablets at different time intervals was estimated by UV spectrophotometer. The formulation F26 released 98.16 % of mesalazine after 24 h, whereas marketed product drug release was 92.02 ± 2.15 after  24 h. From in vivo bioavailability studies, after oral administration of colon targeted tablet containing 400 mg mesalazine, the Cmax, Tmax, and AUC0–∞ of optimized formulation and marketed product was found to be 683.21 ± 0.03 ng/mL, 6.01 ± 0.04 h, 4150.12 ± 5.12 ng*h/mL and 445.34 ± 3.22 ng/mL, 4.00 ± 0.01 h, 3457.18 ± 5.32 ng*h/mL respectively. Cmax, Tmax and AUC values of optimized formulation were found to be significantly higher than of marketed product. The pH dependent tablet system is a promising vehicle for preventing rapid hydrolysis in gastric environment and improving oral bioavailability of mesalazine for the treatment of disease at colon region.

Design, in vitro and in vivo Evaluation of Gemifloxacin Mesylate Floating Matrix Tablets

1970 ◽  
Vol 9 (1) ◽  
pp. 3143-3149
Author(s):  
Sushma Appala ◽  
Ramesh Bomma ◽  
Kishan Veerabrahma
Keyword(s):  
Helicobacter Pylori ◽  
Drug Release ◽  
Lag Time ◽  
Matrix Tablets ◽  
In Vivo Evaluation ◽  
In Vitro Drug Release ◽  
Weight Variation ◽  
Gastro Retentive

Objective of the investigation was to develop gastro retentive dosage form of gemifloxacin mesylate for local action in the stomach as it has antibacterial activity against Helicobacter pylori. Gemifloxacin mesylate is a synthetic broad-spectrum antibacterial agent for oral administration, having 7 hrs half-life and 71% oral bioavailability. In present study, gemifloxacin mesylate floating matrix tablets were prepared by direct compression method using polymers (HPMC K4M, HPMC K15M and polyox WSR 1105) and evaluated for various parameters like drug content, floating behavior (floating lag time and total floating time), in vitro drug release, swelling index, weight variation, friability, hardness and thickness. Sodium bicarbonate was incorporated as gas generating agent in all formulations. Drug-excipients compatibility was studied by Differential Scanning Calorimetry. Results have shown that the amount of polymer in the formulation affected the drug release. Optimized formulation (F8 containing polyox WSR1105 as release retarding agent) was selected based on in vitro drug release, floating lag time, floating time and other parameters. This formulation followed zero order kinetics and non-Fickian mechanism of drug release. In vivo radiographic study was conducted in healthy human volunteers using tablets containing BaSO4 as radio opaque agent. The average residence time was found to be 4.5± 0.86 h (n=3). This design of gastro retentive drug delivery system helps in increasing the local delivery of drug in patients with Helicobacter pylori infection

Radiosensitivity of glioma to Gamma Knife treatment enhanced in vitro and in vivo by RNA interfering Ku70 that is mediated by a recombinant adenovirus

2010 ◽  
Vol 113 (Special_Supplement) ◽  
pp. 228-235 ◽  
Author(s):  
Qiang Jia ◽  
Yanhe Li ◽  
Desheng Xu ◽  
Zhenjiang Li ◽  
Zhiyuan Zhang ◽  
...  
Keyword(s):  
Western Blot ◽  
Gamma Knife ◽  
Blot Analysis ◽  
Western Blot Analysis ◽  
Glioma Cells ◽  
C6 Glioma ◽  
C6 Glioma Cells ◽  
C6 Cells

Object The authors sought to evaluate modification of the radiation response of C6 glioma cells in vitro and in vivo by inhibiting the expression of Ku70. To do so they investigated the effect of gene transfer involving a recombinant replication-defective adenovirus containing Ku70 short hairpin RNA (Ad-Ku70shRNA) combined with Gamma Knife treatment (GKT). Methods First, Ad-Ku70shRNA was transfected into C6 glioma cells and the expression of Ku70 was measured using Western blot analysis. In vitro, phenotypical changes in C6 cells, including proliferation, cell cycle modification, invasion ability, and apoptosis were evaluated using the MTT (3′(4,5-dimethylthiazol-2-yl)2,5-diphenyltetrazolium bromide) assay, Western blot analysis, and cell flow cytometry. In vivo, parental C6 cells transfected with Ad-Ku70shRNA were implanted stereotactically into the right caudate nucleus in Sprague-Dawley rats. After GKS, apoptosis was analyzed using the TUNEL (terminal deoxynucleotidyl transferase–mediated deoxyuridine triphosphate nick-end labeling) method. The inhibitory effects on growth and invasion that were induced by expression of proliferating cell nuclear antigen and matrix metalloproteinase–9 were determined using immunohistochemical analyses. Results The expression of Ku70 was clearly inhibited in C6 cells after transfection with Ad-Ku70shRNA. In vitro following transfection, the C6 cells showed improved responses to GKT, including suppression of proliferation and invasion as well as an increased apoptosis index. In vivo following transfection of Ad-Ku70shRNA, the therapeutic efficacy of GKT in rats with C6 gliomas was greatly enhanced and survival times in these animals were prolonged. Conclusions Our data support the potential for downregulation of Ku70 expression in enhancing the radiosensitivity of gliomas. The findings of our study indicate that targeted gene therapy–mediated inactivation of Ku70 may represent a promising strategy in improving the radioresponsiveness of gliomas to GKT.

Synthesis, Characterization and in vivo Evaluation of PEGylated PPI Dendrimer for Safe and Prolonged Delivery of Insulin

2019 ◽  
Vol 9 (3) ◽  
pp. 248-263 ◽  
Author(s):  
Ashish K. Parashar ◽  
Preeti Patel ◽  
Arun K. Gupta ◽  
Neetesh K. Jain ◽  
Balak Das Kurmi
Keyword(s):  
Blood Glucose ◽  
Drug Release ◽  
Blood Glucose Level ◽  
Glucose Level ◽  
Albino Rats ◽  
Sustained Delivery ◽  
In Vivo Evaluation ◽  
Hemolytic Toxicity

Background: The present study was aimed at developing and exploring the use of PEGylated Poly (propyleneimine) dendrimers for the delivery of an anti-diabetic drug, insulin. Methods: For this study, 4.0G PPI dendrimer was synthesized by successive Michael addition and exhaustive amidation reactions, using ethylenediamine as the core and acrylonitrile as the propagating agent. Two different activated PEG moieties were employed for PEGylation of PPI dendrimers. Various physicochemical and physiological parameters UV, IR, NMR, TEM, DSC, drug entrapment, drug release, hemolytic toxicity and blood glucose level studies of both PEGylated and non- PEGylated dendritic systems were determined and compared. Results: PEGylation of PPI dendrimers caused increased solubilization of insulin in the dendritic framework as well as in PEG layers, reduced drug release and hemolytic toxicity as well as increased therapeutic efficacy with reduced side effects of insulin. These systems were found to be suitable for sustained delivery of insulin by in vitro and blood glucose-level studies in albino rats, without producing any significant hematological disturbances. Conclusion: Thus, surface modification of PPI dendrimers with PEG molecules has been found to be a suitable approach to utilize it as a safe and effective nano-carrier for drug delivery.

Synthesis and characterization of Chitosan-Catechol conjugates: Development and in vitro, in silico and in vivo evaluation of mucoadhesive pellets of lafutidine

2021 ◽  
pp. 088391152199784
Author(s):  
Loveleen Kaur ◽  
Ajay Kumar Thakur ◽  
Pradeep Kumar ◽  
Inderbir Singh
Keyword(s):  
Drug Release ◽  
In Silico ◽  
Ex Vivo ◽  
Strong Interactions ◽  
Dissolution Time ◽  
Sem Images ◽  
In Vivo Evaluation ◽  
Release Studies

Present study was aimed to synthesize and characterize Chitosan-Catechol conjugates and to design and develop mucoadhesive pellets loaded with lafutidine. SEM images indicated the presence of fibrous structures responsible for enhanced mucoadhesive potential of Chitosan-Catechol conjugates. Thermodynamic stability and amorphous nature of conjugates was confirmed by DSC and XRD studies respectively. Rheological studies were used to evaluate polymer mucin interactions wherein strong interactions between Chitosan-Catechol conjugate and mucin was observed in comparison to pristine chitosan and mucin. The mucoadhesion potential of Chitosan-Catechol (Cht-C) versus Chitosan (Cht) was assessed in silico using molecular mechanics simulations and the results obtained were compared with the in vitro and ex vivo results. Cht-C/mucin demonstrated much higher energy stabilization (∆E ≈ −65 kcal/mol) as compared to Cht/mucin molecular complex. Lafutidine-loaded pellets were prepared from Chitosan (LPC) and Chitosan-Catechol conjugates (LPCC) and were evaluated for various physical properties viz. flow, circularity, roundness, friability, drug content, particle size and percent mucoadhesion. In vitro drug release studies on LPC and LPCC pellets were performed for computing t50%, t90% and mean dissolution time. The values of release exponent from Korsmeyer-Peppas model was reported to be 0.443 and 0.759 for LPC and LPCC pellets suggesting Fickian and non-Fickian mechanism representing drug release, respectively. In vivo results depicted significant controlled release and enhanced residence of the drug after being released from the chitosan-catechol coated pellets. Chitosan-Catechol conjugates were found to be a promising biooadhesive polymer for the development of various mucoadhesive formulations.

scholarly journals Development and Evaluation of Clove and Cinnamon Supercritical Fluid Extracts-Loaded Emulgel for Antifungal Activity in Denture Stomatitis

Gels ◽  
2022 ◽  
Vol 8 (1) ◽  
pp. 33
Author(s):  
Meenakshi Srinivas Iyer ◽  
Anil Kumar Gujjari ◽  
Sathishbabu Paranthaman ◽  
Amr Selim Abu Lila ◽  
Khaled Almansour ◽  
...  
Keyword(s):  
Drug Release ◽  
Cure Rate ◽  
In Vitro Drug Release ◽  
Promising Alternative ◽  
Denture Stomatitis ◽  
Antifungal Effects ◽  
The Common ◽  
Central Composite

Denture stomatitis (DS), usually caused by Candida infection, is one of the common denture-related complications in patients wearing dentures. Clove and cinnamon oils have been acknowledged for their anti-inflammatory, antimicrobial activity, and antifungal effects in the oral cavity. The aim of this study, therefore, was to prepare clove/cinnamon oils-loaded emulgel and to assess its efficacy in treating Candida albicans-associated denture stomatitis. Central composite design was adopted to formulate and optimize clove/cinnamon extracts-loaded emulgel. The formulated preparations were assessed for their physical appearance, particle size, viscosity, spreadability, and in-vitro drug release. In addition, in-vivo therapeutic experiments were conducted on 42 patients with denture stomatitis. The prepared emulgel formulations showed good physical characteristics with efficient drug release within 3 h. In addition, in-vivo antifungal studies revealed that the optimized formula significantly (p < 0.001) reduced Candida colony counts from the denture surface, compared to commercially available gel (240.38 ± 27.20 vs. 398.19 ± 66.73 CFU/mL, respectively). Furthermore, the optimized formula and succeeded in alleviating denture stomatitis-related inflammation with a better clinical cure rate compared to commercially available gel Collectively, herbal extracts-loaded emulgel might be considered an evolution of polyherbal formulations and might represent a promising alternative to the existing allopathic drugs for the treatment of denture stomatitis, with better taste acceptability and no side effects.

scholarly journals DESIGN AND IN VITRO/IN VIVO EVALUATION OF EXTENDED RELEASE MATRIX TABLETS OF NATEGLINIDE

2018 ◽  
Vol 7 (6) ◽  
Author(s):  
Mohini Sihare ◽  
Rajendra Chouksey
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release Profile ◽  
Matrix Tablets ◽  
In Vivo Studies ◽  
Release Mechanism ◽  
In Vivo Evaluation

Aim: Nateglinide is a quick acting anti-diabetic medication whose potent activity lasts for a short duration. One of the dangerous side effects of nateglinide administration is rapid hypoglycemia, a condition that needs to be monitored carefully to prevent unnecessary fatalities. The aim of the study was to develop a longer lasting and slower releasing formulation of nateglinide that could be administered just once daily. Methods: Matrix tablets of nateglinide were prepared in combination with the polymers hydroxypropylmethylcellulose (HPMC), eudragits, ethyl cellulose and polyethylene oxide and the formulated drug release patterns were evaluated using in vitro and in vivo studies. Conclusion: Of the seventeen formulated matrix tablets tested, only one formulation labelled HA-2 that contained 15% HPMC K4M demonstrated release profile we had aimed for. Further, swelling studies and scanning electron microscopic analysis confirmed the drug release mechanism of HA-2. The optimized formulation HA-2 was found to be stable at accelerated storage conditions for 3 months with respect to drug content and physical appearance. Mathematical analysis of the release kinetics of HA-2 indicated a coupling of diffusion and erosion mechanisms. In-vitro release studies and pharmacokinetic in vivo studies of HA-2 in rabbits confirmed the sustained drug release profile we had aimed for. Keywords: Hydroxypropylmethylcellulose, Matrix tablets, Nateglinide, Sustained release

scholarly journals FORMULATION AND IN VITRO–IN VIVO PHARMACOKINETIC EVALUATION OF CARDIOVASCULAR DRUG-LOADED PULSATILE DRUG DELIVERY SYSTEMS

2021 ◽  
pp. 144-151
Author(s):  
KUMAR BABU PASUPULETI ◽  
VENKATACHALAM A. ◽  
BHASKAR REDDY KESAVAN
Keyword(s):  
Drug Release ◽  
Ethyl Cellulose ◽  
Release Kinetic ◽  
In Vitro Drug Release ◽  
The Core ◽  
Coated Tablet ◽  
Tablet Formulations ◽  
Core Tablet

Objective: This study is to formulate Nebivolol into a Pulsatile liquid, solid composite compression coated tablet, which will delay the release of the drug in early morning hypertension conditions. Methods: The liquid, solid composite tablet was formulated and compressed with the ethylcellulose coating polymer. The percent in vitro drug release of the liquid solid composite compressed tablet was tested. Based on disintegration time and wetting time, the LCS2, LCS3, LSC6, LCS7 and LCS12 formulations were found to be the optimized solid-liquid compacts fast-dissolving core tablet formulations, which may be excellent candidates for further coating with polymer to transfer into press coated pulsatile tablet formulations. Coating the core tablet with varying ethyl cellulose concentrations resulted in five different formulations of the pulsatile press-coated tablet (CT1, CT2, CT3, CT4, CT5). In vitro drug release, in vitro release, kinetic studies, in vivo pharmacokinetic and stability tests were all performed for the prepared pulsatile press coated tablet. Results: CT3 tablets are coated with ethyl cellulose polymer, which shows maximum controlled drug release from the core tablet i.e. 96.34±1.2% at 8th h. It shows there was an efficient delay in drug release form core tablet i.e. up to 3 h, followed by the maximum amount of drug release of 96.34±2.4 at 8h. Which shows the core drug will be more efficiently protected from the gastric acid environment 1.2 pH, duodenal environment 4.0 pH and release drug only in the small intestine. Conclusion: According to the findings, CT3 Pulsatile press-coated tablet increased the bioavailability of Nebivolol by 3.11 percent.

Sign in / Sign up

Export Citation Format

Share Document