scholarly journals STABILITY ESTIMATION METHOD FOR ARMOR UNITS FOR BREAKWATERS WITH PARAPETS AGAINST TSUNAMI OVERFLOW

2018 ◽  
pp. 26
Author(s):  
Jun Mitsui ◽  
Shin-ichi Kubota ◽  
Akira Matsumoto
Keyword(s):  
Slope Angle ◽  
Estimation Method ◽  
Hydraulic Model ◽  
Water Jet ◽  
Rear Side ◽  
Stability Estimation ◽  
Model Experiments ◽  
Wide Range ◽  
Rubble Mound ◽  
Caisson Breakwater

This paper presents a stability estimation method for armor units to cover a rubble mound on the rear side of a caisson breakwater against tsunami overflow while taking into account the influence of the shape of the superstructures of the caisson. In this method, the required mass of the armor units is obtained from the impinging velocity onto the rear side mound. This is calculated by using the overflow depth. Accordingly, the influence of the shape of the superstructure is taken into account directly. This method also takes the influence of the slope angle into account properly by using the formula by Isbash. In addition, the influence of the impingement position of the overflow nappe and the influence of the thickness of the water jet are considered. The validity of this method is confirmed by comparing with the results of hydraulic model experiments conducted in a wide range of conditions.

scholarly journals Calculation and hydraulic model experiments for the stable weight of rubble-mound considering the overflow and seepage flow

2015 ◽  
Vol 1 (6) ◽  
pp. 58-62
Author(s):  
Shota Inoue ◽  
Kiyonobu Kasama ◽  
Mitsunari Hirasawa ◽  
Kouki Zen ◽  
Zentaro Furukawa ◽  
...  
Keyword(s):  
Seepage Flow ◽  
Hydraulic Model ◽  
Model Experiments ◽  
Rubble Mound

HYDRAULIC MODEL EXPERIMENTS TO UNDERSTAND INFLUENCE OF UPCOAST STRUCTURES ON MEASURES AGAINST CLOGGING OF THE MOTOFUJI CALVERT

2019 ◽  
Vol 75 (2) ◽  
pp. I_541-I_546
Author(s):  
Masaki IKEDA ◽  
Hiroshige MATSUMOTO ◽  
Fumiaki ITO ◽  
Satoshi HENMI ◽  
Go ASANO
Keyword(s):  
Hydraulic Model ◽  
Model Experiments

Keynote

2021 ◽  
Vol 48 (4) ◽  
pp. 3-3
Author(s):  
Ingo Weber
Keyword(s):  
Cost Estimation ◽  
Estimation Method ◽  
Main Topic ◽  
System Throughput ◽  
Distributed Ledger ◽  
Smart Contract ◽  
Distributed Ledger Technology ◽  
Wide Range ◽  
The Cost ◽  
Application Developers

Blockchain is a novel distributed ledger technology. Through its features and smart contract capabilities, a wide range of application areas opened up for blockchain-based innovation [5]. In order to analyse how concrete blockchain systems as well as blockchain applications are used, data must be extracted from these systems. Due to various complexities inherent in blockchain, the question how to interpret such data is non-trivial. Such interpretation should often be shared among parties, e.g., if they collaborate via a blockchain. To this end, we devised an approach codify the interpretation of blockchain data, to extract data from blockchains accordingly, and to output it in suitable formats [1, 2]. This work will be the main topic of the keynote. In addition, application developers and users of blockchain applications may want to estimate the cost of using or operating a blockchain application. In the keynote, I will also discuss our cost estimation method [3, 4]. This method was designed for the Ethereum blockchain platform, where cost also relates to transaction complexity, and therefore also to system throughput.

scholarly journals WAVE REDUCTION EFFECT OF HYDROPLANE TSUNAMI BARRIER IN TERMS OF HYDRAULIC MODEL EXPERIMENTS

2015 ◽  
Vol 71 (2) ◽  
pp. I_1081-I_1086
Author(s):  
Ryoukei AZUMA ◽  
Tadao ITO ◽  
Hideaki HANDA ◽  
Tetsuya HIRAISHI ◽  
Takahiro SUGANO
Keyword(s):  
Hydraulic Model ◽  
Model Experiments ◽  
Reduction Effect ◽  
Wave Reduction

scholarly journals A Mobile Sensing System for UrbanPM2.5Monitoring with Adaptive Resolution

2016 ◽  
Vol 2016 ◽  
pp. 1-15 ◽  
Author(s):  
Hongjie Guo ◽  
Guojun Dai ◽  
Jin Fan ◽  
Yifan Wu ◽  
Fangyao Shen ◽  
...  
Keyword(s):  
Air Quality ◽  
Meteorological Data ◽  
Computational Cost ◽  
Estimation Method ◽  
Mobile Sensing ◽  
Prototype System ◽  
Adaptive Grids ◽  
Sensing System ◽  
Adaptive Resolution ◽  
Wide Range

This paper develops a mobile sensing system, the first system used in adaptive resolution urban air quality monitoring. In this system, we employ several taxis as sensor carries to collect originalPM2.5data and collect a variety of datasets, including meteorological data, traffic status data, and geographical data in the city. This paper also presents a novel method AG-PCEM (Adaptive Grid-Probabilistic Concentration Estimation Method) to infer thePM2.5concentration for undetected grids using dynamic adaptive grids. We gradually collect the measurements throughout a year using a prototype system in Xiasha District of Hangzhou City, China. Experimental data has verified that the proposed system can achieve good performance in terms of computational cost and accuracy. The computational cost of AG-PCEM is reduced by about 40.2% compared with a static grid method PCEM under the condition of reaching the close accuracy, and the accuracy of AG-PCEM is far superior as widely used artificial neural network (ANN) and Gaussian process (GP), enhanced by 38.8% and 14.6%, respectively. The system can be expanded to wide-range air quality monitor by adjusting the initial grid resolution, and our findings can tell citizens actual air quality and help official management find pollution sources.

scholarly journals STABILITY OF HIGH DENSITY CUBES IN RUBBLE MOUND BREAKWATERS

2020 ◽  
pp. 4
Author(s):  
Yalcin Yuksel ◽  
Marcel van Gent ◽  
Esin Cevik ◽  
H. Alper Kaya ◽  
Irem Gumuscu ◽  
...  
Keyword(s):  
Relative Density ◽  
Slope Angle ◽  
High Density ◽  
Experimental Results ◽  
Normal Density ◽  
Stability Number ◽  
Damage Initiation ◽  
Rubble Mound ◽  
The Stability ◽  
Rubble Mound Breakwaters

The stability number for rubble mound breakwaters is a function of several parameters and depends on unit shape, placing method, slope angle, relative density, etc. In this study two different densities for cubes in breakwater armour layers were tested to determine the influence of the density on the stability. The experimental results show that the stability of high density blocks were found to be more stable and the damage initiation for high density blocks started at higher stability numbers compared to normal density cubes.

scholarly journals DQ-Frame Admittance Estimation of Three-Phase Converters with a Wide Range of Operating Points

2021 ◽  
Author(s):  
Hong Gong ◽  
xiongfei wang ◽  
Dongsheng Yang
Keyword(s):  
Error Estimation ◽  
Closed Loop ◽  
Estimation Method ◽  
Experimental Results ◽  
Multidimensional Interpolation ◽  
Three Phase ◽  
Wide Range ◽  
Linearized Model ◽  
Operating Points ◽  
Error Estimation Method

The <i>dq</i>-frame admittance of closed-loop controlled three-phase converters is a linearized model that is dependent on the operating points of the system. Yet, it is impractical to measure the converter admittance at all operating points. This paper, thus, proposes an approach to estimating the <i>dq</i>-frame admittance of three-phase converters at a wide range of operating points. The method applies multidimensional interpolation to a given set of admittance data, which is measured from the pre-defined operating points. The accuracy of interpolation is then evaluated by using the posterior error estimation method. The number of pre-defined operating points is next adjusted to find a good compromise between the accuracy and efficiency of the approach. Simulations and experimental results verify the effectiveness of the approach.<div><br></div>

SAMPLE CLOCK OFFSET COMPENSATION IN THE FIFTH-GENERATION NEW RADIO UPLINK

2021 ◽  
Author(s):  
О.Г. ПОНОМАРЕВ ◽  
М. АСАФ
Keyword(s):  
Signal To Noise Ratio ◽  
Radio Channel ◽  
Estimation Method ◽  
Estimation Methods ◽  
Fifth Generation ◽  
New Radio ◽  
Shared Channel ◽  
Wide Range ◽  
Offset Compensation ◽  
Clock Offset

Рассмотрена проблема коррекции искажений OFDM-сигнала, вызванных смещением частоты дискретизации сигнала в приемном и передающем устройствах системы сотовой связи пятого поколения. Предлагаемый метод компенсации смещения частоты дискретизации основывается на прямой коррекции искажений, вносимых в передаваемый сигнал наличием смещения, и не предполагает какой-либо оценки величины смещения. Метод предназначен для коррекции сигналов в восходящем канале системы сотовой связи пятого поколения и основывается на использовании референсных сигналов, рекомендованных стандартами 3GPP. Результаты численного моделирования показали, что использование предлагаемого метода позволяет повысить эффективность передачи данных по многолучевому радиоканалу более чем на 15% в широком диапазоне значений отношения сигнал/шум. 5G-NR, CP-OFDM, synchronization, sample clock offset, PUSCH. О The paper investigates the issue of sampling clock offset ( SCO) in the fifth generation new radio systems. Due to the imperfect SCO estimation methods, the correction methods relying on the SCO estimation are not perfect, so the proposed method directly corrects the effect of SCO without using any kind of estimation method. Our method is designed to correct the signals in the physical uplink shared channel (PUSCH). The method uses reference signals as recommended by the 3rd generation partnership project (3GPP) standards. The results of the numerical simulation show that the use of the proposed method increases the efficiency of data transmission over the multipath radio channel by more than 15% in a wide range of signal-to-noise ratio values.

Sign in / Sign up

Export Citation Format

Share Document