Band-Engineered Structural Design of High-Performance Deep-Ultraviolet Light-Emitting Diodes

In this study, systematic structural design was investigated numerically to probe into the cross-relating influences of n-AlGaN layer, quantum barrier (QB), and electron-blocking layer (EBL) on the output performance of AlGaN deep-ultraviolet (DUV) light-emitting diodes (LEDs) with various Al compositions in quantum wells. Simulation results show that high-Al-composition QB and high-Al-composition EBL utilized separately are beneficial for the enhancement of carrier confinement, while the wall-plug efficiency (WPE) degrades dramatically if both high-Al-composition QB and EBL are existing in a DUV LED structure simultaneously. DUV LEDs may be of great optical performance with appropriate structural design by fine-tuning the material parameters in n-AlGaN layer, QB, and EBL. The design curves provided in this paper can be very useful for the researchers in developing the DUV LEDs with a peak emission wavelength ranging from 255 nm to 285 nm.

Characteristics of GaN-Based Nanowire Gate-All-Around (GAA) Transistors

We investigate the DC, C–V, and pulse performances in GaN-based nanowire gate-all-around (GAA) transistors with two kinds of geometry: one is AlGaN/GaN heterostructure with two dimensional electron gas (2DEG) channel and the other is only GaN layer without 2DEG channel. From I–V and C–V curves, the fabricated GaN nanowire GAA transistor with AlGaN layer clearly exhibits normally-on operation with negative threshold voltage (Vth) due to the existence of 2DEG channel on the trapezoidal shaped GaN nanowire. On the other hand, the GaN nanowire GAA transistor without AlGaN layer presents a positive Vth (normally-off operation) due to the absent of 2DEG channel on the triangle shaped GaN nanowire. However, both devices show the similar temperaturedependent I–V characteristics due to the combination of bulk channel and surface channel in GaN nanowire GAA channel are mostly contributed, rather than the 2DEG channel. GaN-based nanowire GAA transistors demonstrate to almost negligible current collapse phenomenon due to the perfect GAA gate structure in GaN nanowire. The proposed GaN-based nanowire GAA transistors are very promising candidate for both high power device and nano-electronics application.

Influence of AlN and GaN Pulse Ratios in Thermal Atomic Layer Deposited AlGaN on the Electrical Properties of AlGaN/GaN Schottky Diodes

Atomic layer deposited AlGaN with different AlN and GaN pulse ratios (2:1, 1:1, and 1:2) was used to prepare AlGaN/GaN Schottky diodes, and their current transport mechanisms were investigated using current–voltage (I–V) and capacitance–voltage (C–V) measurements. Under low reverse bias condition, the sample with the pulse ratio of 2:1 was explained by Poole–Frenkel emission and the negative temperature dependence for the sample with the pulse ratio of 1:2 was associated with the acceptor levels in the AlGaN layer. Fast interface traps at 0.24–0.29 eV were observed for the samples with the pulse ratios of 1:1 and 1:2, whereas bulk traps at ~0.34 eV were observed for the sample with the pulse ratio of 2:1. Higher trap densities were obtained from the C–V hysteresis measurements when the pulse ratios were 1:1 and 1:2, indicating the presence of a charge trapping interfacial layer. According to the X-ray photoelectron spectroscopy spectra, the pulse ratio of 2:1 was found to have less oxygen-related defects in the AlGaN layer.