Formation of Bubble-Loop Complexes During Helium Radiation in Fe-9Cr Steel

In the present study, the Fe-9Cr model alloy was irradiated with 240 keV He2+ at 550°C with a dose of 0.5 dpa at the peak damage region. The depth distribution of bubbles in Fe-9Cr alloy was investigated by transmission electron microscopy (TEM). The experimental results revealed that the spatial distribution of bubbles along the depth is different. In the region with higher helium concentration and irradiation dose, the bubbles inclined to be situated inside the plane of loops, forming a structure of “bubble-loop complex.” However, in regions where the helium concentration and irradiation dose are relatively low, the number of “bubble-loop complexes” significantly decreased. In addition, the Burgers vector of “bubble-loop complexes” was identified as <100> type. Radiation-induced enrichment of Cr atoms at the “bubble-loop complexes” was also quantitatively estimated by energy-dispersive X-ray spectroscopy (EDS) in the scanning TEM mode.

Effects of Helium Production and Displacement Damage on Microstructural Evolution and Mechanical Properties in Helium-Implanted Austenitic Stainless Steel and Ferritic/Martensitic Steel

The effects of helium concentration and displacement damage on microstructural evolution at low dpa and low helium concentration were mainly investigated in specimens of austenitic stainless steel 316FR or SUS304 and a high chromium martensitic steel (HCM12A). The 316FR and HCM12A specimens were implanted uniformly with helium at 823 K up to 30 appm-He or 50 appm-He by 50 MeV cyclotron accelerator using energy degraders. After the helium implantation, the microstructures were examined by a transmission electron microscopy and positron annihilation lifetime measurements. Irradiation hardening behaviors were analyzed using SUS304 and HCM12A steels at 823 K implanted with He ion up to 100 appm with different He/dpa ratios in the HIT ion irradiation experiments and the hardening behaviors were examined by nano indentation method. In the irradiation and annealing specimens, these mechanical properties and microstructures were examined to understand the effects of helium production, displacement damage and annealing on microstructural development, and kinetic Monte Carlo (kMC) simulations were also performed to understand the microstructural development, and the results were compared with the results of TEM observation and positron annihilation lifetime measurements. Important some differences in the microstructural developments such as cavity formation and growth between austenitic stainless steel and martensitic steel were observed in low dpa and low helium concentration conditions.

The study of dissolved helium and radon concentrations in groundwaters of Southern Pribaikalie in connection with seismic processes

It is known that changes in geochemical fields may be due to the formation and development of earthquake foci. Hydrogeochemical fields at observation sites can be disturbed by underground shocks of sufficient energy, which occur at specific epicentral distances. Our study aimed to reveal these relationships by analysing the concentrations of helium and radon in groundwaters of Southern Pribaikalie, the area around Lake Baikal in Russia. Water samples were taken daily at 10 a.m. from artesian well No. 3 in Zeleny Mys, Irkutsk region. After water sparging, radon concentrations were measured by beta-detection Camera-01 and INGEM-1 (magnetic discharge indicator of helium) to determine helium concentrations. We analysed the concentration values in connection with 22 seismic events that occurred from 2010 to 2016 at the hydrogeochemical observation site (energy classes K of 10.4–14.5; epicentral distances of 40–750 km; conditional energy of K’>6). Based on the radon and helium concentration diagrams, specific regularities were established in the concentration variations before the earthquakes. Generally, concentration variations (increasing/decreasing) in excess of 1.5–2.0 standard deviations preceded earthquakes. This article presents the study results and discusses variations in the radon and helium concentrations, which are due to the seismic process and can be considered as a short-term precursor of earthquakes.

The Role of Helium on Ejecta Production in Copper

The effect of helium (He) concentration on ejecta production in OFHC-Copper was investigated using Richtmyer–Meshkov Instability (RMI) experiments. The experiments involved complex samples with periodic surface perturbations machined onto the surface. Each of the four target was implanted with a unique helium concentration that varied from 0 to 4000 appm. The perturbation’s wavelengths were λ ≈ 65 μ m, and their amplitudes h 0 were varied to determine the wavenumber ( 2 π / λ ) amplitude product k h 0 at which ejecta production beganfor Cu with and without He. The velocity and mass of the ejecta produced was quantified using Photon Doppler Velocimetry (PDV) and Lithium-Niobate (LN) pins, respectively. Our results show that there was an increase of 30% in the velocity at which the ejecta cloud was traveling in Copper with 4000 appm as compared to its unimplanted counterpart. Our work also shows that there was a finer cloud of ejecta particles that was not detected by the PDV probes but was detected by the early arrival of a “signal” at the LN pins. While the LN pins were not able to successfully quantify the mass produced due to it being in the solid state, they did provide information on timing. Our results show that ejecta was produced for a longer time in the 4000 appm copper.

FACTORS DETERMINING THE CHANGE OF HELIUM CONCENTRATION IN UNDERGROUND WATERS OF UZBEKISTAN AND THE ACCORDING TERRITORIES

The article presents the results of the analysis of long-term regime observations of change in the concentrations of groundwater of Uzbekistan and adjacent territories. Based on these observations, the main factors affecting the changes of the quantitative content of helium. The results of the evaluation of the characteristics of the changes and distribution of helium in groundwater. The change of helium concentration in groundwater significantly influence the deformation and hydro-geodynamic and tectonic conditions. Described and quantified four factors with different concentrations of helium. They allow to correctly assess the variation of helium associated with seismic events.

Comparison of Vacancy Sink Efficiency of Cu/V and Cu/Nb Interfaces by the Shared Cu Layer

This paper provides a new method to compare and then reveal the vacancy sink efficiencies quantitively between different hetero-interfaces with a shared Cu layer in one sample, in contrast to previous studies, which have compared the vacancy sink efficiencies of interfaces in different samples. Cu-Nb-Cu-V nanoscale metallic multilayer composites (NMMCs) containing Cu/V and Cu/Nb interfaces periodically were prepared as research samples and bombarded with helium ions to create vacancies which were filled by helium bubbles. A special Cu layer shared by adjoining Cu/V and Cu/Nb interfaces exists, in which the implanted helium concentration reaches its maximum and remains nearly constant with a well-designed incident energy. The results show that bubble-denuded zones (BDZ) close to interfaces exist, and that the width of the BDZ close to the Cu/V interface is less than that of Cu/Nb interface. This result is explained by one-dimensional diffusion theory, and the ratio of vacancy sink efficiency between Cu/V and Cu/Nb interfaces is calculated. Conclusively, Cu/Nb interfaces are more efficient than Cu/V interfaces in eliminating vacancies induced by radiation.