Digital transformation in the construction industry: a bibliometric review

Purpose The construction industry has been traditionally referred to as slow when it comes to technological transformation. This study aims to investigate and present a scorecard of the construction industry in the past decade, the paper adopted Bibliometrics. The study identified the various digital transformation (DT) aspects in the construction industry and future research directions are also identified. Design/methodology/approach To achieve the aim of this research, an inductive approach was adopted through a grounded theory strategy. Secondary data was retrieved from the Scopus database and analysed using Biblioshiny and VOSviewer. The data was retrieved through specific keywords related to the study focus. Findings The study also proposed a balanced flow model for DT discussion in the construction industry. DT in the construction industry disrupts every aspect of the industry, albeit at different rates due to the existing barriers; hence, the study identified areas that require further research. It, thus, provides a theoretical and practical basis for researchers and practitioners alike. Originality/value The study reviewed the DT research discuss in the construction industry. It is worthy of note that this is the first study that analyses the DT of the construction industry in the past decade.

Insights into the mixing efficiency of submesoscale Centrifugal-Symmetric instabilities

Submesoscale processes provide a pathway for energy to transfer from the balanced circulation to turbulent dissipation. One class of submesoscale phenomena that has been shown to be particularly effective at removing energy from the balanced flow are centrifugal-symmetric instabilities (CSIs), which grow via geostrophic shear production. CSIs have been observed to generate significant mixing in both the surface boundary layer and bottom boundary layer flows along bathymetry, where they have been implicated in the mixing and watermass transformation of Antarctic Bottom Water. However, the mixing efficiency (i.e. the fraction of the energy extracted from the flow used to irreversibly mix the fluid) of these instabilities remains uncertain, making estimates of mixing and energy dissipation due to CSI difficult.In this work we use large-eddy simulations to investigate the mixing efficiency of CSIs in the submesoscale range. We find that centrifugally-dominated CSIs (i.e. CSI mostly driven by horizontal shear production) tend to have a higher mixing efficiency than symmetrically-dominated ones (i.e. driven by vertical shear production). The mixing efficiency associated with CSIs can therefore alternately be significantly higher or significantly lower than the canonical value used by most studies. These results can be understood in light of recent work on stratified turbulence, whereby CSIs control the background state of the flow in which smaller-scale secondary overturning instabilities develop, thus actively modifying the characteristics of mixing by Kelvin-Helmholtz instabilities. Our results also suggest that it may be possible to predict the mixing efficiency with more readily measurable parameters (namely the Richardson and Rossby numbers), which would allow for parameterization of this effect.

The Role of Production Planning in Enhancing an Efficient Manufacturing System – An Overview

Every manufacturing system can only survive with a high level of system planning and budgeting. Production planning is a sequential ladder in the manufacturing setting to ensure that materials input (raw materials, men, money, and machine) is made available within a stipulated time frame, in the appropriate amount to produce the demanded output of goods and services based on the schedule specified. Production planning also helps in making available high quality of goods and services in the right quantities to the customer at the demanded delivery timing to attain higher degree of customer satisfaction. Through production planning, different departmental activities i.e., engineering, production, purchasing, sales, and marketing, as well as stock control department, and other units that may relate to production are coordinated to attain a regular, steady, and balanced flow of production thus, enhancing reduction in production cycle time. Production planning serves as an instrument which estimates to gear up the performance of different departments and individuals of an organization in such a manner that will enhance better service to customers, fewer rush orders, more efficient use of equipment, reduced idle time of both machine and personnel, improved plant morale, good public image, and lower capital requirement, it may also create alternative plans to meet any form of emergency or contingency during the cause of production. From the foregoing, a manufacturing system that incorporates production planning in its operations will be more efficient, effective, and economical as compared with those that did not.

Transition from Geostrophic Flows to Inertia–Gravity Waves in the Spectrum of a Differentially Heated Rotating Annulus Experiment

Inertia–gravity waves (IGWs) play an essential role in the terrestrial atmospheric dynamics as they can lead to energy and momentum flux when propagating upward. An open question is to what extent IGWs contribute to the total energy and to the flattening of the energy spectrum observed at the mesoscale. In this work, we present an experimental investigation of the energy distribution between the large-scale balanced flow and the small-scale imbalanced flow. Weakly nonlinear IGWs emitted from baroclinic jets are observed in the differentially heated rotating annulus experiment. Similar to the atmospheric spectra, the experimental kinetic energy spectra reveal the typical subdivision into two distinct regimes with slopes k−3 for the large scales and k−5/3 for the small scales. By separating the spectra into the vortex and wave components, it emerges that at the large-scale end of the mesoscale the gravity waves observed in the experiment cause a flattening of the spectra and provide most of the energy. At smaller scales, our data analysis suggests a transition toward a turbulent regime with a forward energy cascade up to where dissipation by diffusive processes occurs.

CFD Evaluation of Blood Flow in an Improved Blalock-Taussig Shunt Using Patient Specific Geometries

Blalock-Taussig (BT) Shunt is a palliative surgical procedure used during a Norwood surgery on a newborn baby suffering from cyanotic heart defects. The BT Shunt can increase blood flow in patients’ pulmonary artery which can ease the “Blue Baby Syndrome.” Currently used BT Shunts do not produce a balanced flow distribution to the pulmonary arteries (PAs) which can cause high wall shear stress (WSS) and blood flow separation resulting in blood clots. A modified BT Shunt was designed to partially solve this problem. In our previous work [1], the modified BT Shunt was shown by numerical simulations to have the ability to better control the flow distribution between Innominate Artery (IA) and PA with lower and gradually varying WSS and with improved flow balance to the pulmonary artery at the T-junction of the shunt. The goal of this paper is to computationally evaluate the flow in the modified BT shunt model between innominate and pulmonary artery using a patient specific aorta model. The simulations are performed using the commercial CFD software ANSYS Fluent. The improved modified BT shunt is connected between IA and PA. A change in the length of the shunt can be made to fit it under different conditions of actual patients. In numerical simulations, a full geometry of patient’s aorta is considered. Results for different lengths of the shunt are compared to determine the length that generates the lowest WSS and improved flow distribution to the PAs. It was found that the length of nearly 26mm creates lower WSS and flow rate difference between the two sides of PA at the T-junction attachment of the shunt. A sophisticated computational model was created using SolidWorks and Blender software to create the realistic geometry which included the IA, PA and modified BT shunt. The numerical simulations provide details of the flow field including velocity and pressure field, WSS, and blood damage. Several parameters in shunt design weigh heavily in reducing the thrombosis. This study demonstrates how CFD can be effectively utilized in the design of a medical device such as BT shunt to improve the clinical outcomes in patients.

Potential Vorticity and Balanced and Unbalanced Moisture

Atmospheric flows are often decomposed into balanced (low frequency) and unbalanced (high frequency) components. For a dry atmosphere, it is known that a single mode, the potential vorticity (PV), is enough to describe the balanced flow and determine its evolution. For a moist atmosphere with phase changes, on the other hand, balanced–unbalanced decompositions involve additional complexity. In this paper, we illustrate that additional balanced modes, beyond PV, arise from the moisture. To support and motivate the discussion, we consider balanced–unbalanced decompositions arising from a simplified Boussinesq numerical simulation and a hemispheric-sized channel simulation using the Weather Research and Forecasting (WRF) Model. One important role of the balanced moist modes is in the inversion principle that is used to recover the moist balanced flow: rather than traditional PV inversion that involves only the PV variable, it is PV-and-M inversion that is needed, involving M variables that describe the moist balanced modes. In examples of PV-and-M inversion, we show that one can decompose all significant atmospheric variables, including total water or water vapor, into balanced (vortical mode) and unbalanced (inertio-gravity wave) components. The moist inversion, thus, extends the traditional dry PV inversion to allow for moisture and phase changes. In addition, we illustrate that the moist balanced modes are essentially conserved quantities of the flow, and they act qualitatively as additional PV-like modes of the system that track balanced moisture.

Transition from geostrophic flows to inertia-gravity waves in the spectrum of a differentially heated rotating annulus experiment.

<p>Inertia-gravity waves (IGWs) are known to play an essential role in the terrestrial atmospheric dynamics as they can lead to energy and momentum flux when they propagate upwards. An open question is to which extent nearly linear IGWs contribute to the total energy and to flattening of the energy spectrum observed at the mesoscale.<br>In this work, we present an experimental investigation of the energy distribution between the large-scale balanced flow and the small-scale imbalanced flow. Weakly nonlinear IGWs emitted from baroclinic jets are observed in the differentially heated rotating annulus experiment. Similar to the atmospheric spectra, the experimental kinetic energy spectra reveal the typical subdivision into two distinct regimes with slopes <em>k</em><sup>-3</sup> for the large scales and <em>k<sup>-</sup></em><sup>5/3</sup> for smaller scales. By separating the spectra into a vortex and wave part, it emerges that at the largest scales in the mesoscale range the gravity waves observed in the experiment cause a flattening of the spectra and provide most of the energy. At smaller scales, our data analysis suggests a transition towards a turbulent regime with a forward energy cascade up to where dissipation by diffusive processes occurs.</p>