RIPTIDE: a novel recoil-proton track imaging detector for fast neutrons

Neutron detectors are an essential tool for the development of many research fields, as nuclear, particle and astroparticle physics as well as radiotherapy and radiation safety. Since neutrons cannot directly ionize, their detection is only possible via nuclear reactions. Consequently, neutron-based experimental techniques are related to the detection of charged particle or electromagnetic radiation originating from neutron-induced reactions. The study of fast neutrons is often based on the neutron-proton elastic scattering reaction. In this case, the ionization induced by the recoil protons in a hydrogenous material constitutes the basic information for the design and development of neutron detectors. Although experimental techniques have continuously improved and refined, so far, proton-recoil track imaging is still weak in laboratory rate environments because of the extremely small detection efficiency. To address this deficiency, we propose a novel recoil-proton track imaging system in which the light deriving from a fast scintillation signal is used to perform a complete reconstruction in space and time of the event. In particular, we report the idea of RIPTIDE (RecoIl Proton Track Imaging DEtector): an innovative system which combines a plastic scintillator coupled to imaging devices, based on CMOS technology, or micro channel plate sensors. The proposed apparatus aims at providing neutron spectrometry capability by stereoscopically imaging the recoil-protons tracks, correlating the spatial information with the time information. RIPTIDE intrinsically enable the online analysis of the ionization track, thus retrieving the neutron direction and energy, without spoiling the overall efficiency of the detection system. Finally, the spatial and topological event reconstruction enables particle discrimination — a crucial requirement for neutron detection — by deducing the specific energy loss along the track.

Setup for the measurement of the 235U(n, f) cross section relative to n-p scattering up to 1 GeV

The neutron induced fission of 235U is extensively used as a reference for neutron fluence measurements in various applications, ranging from the investigation of the biological effectiveness of high energy neutrons, to the measurement of high energy neutron cross sections of relevance for accelerator driven nuclear systems. Despite its widespread use, no data exist on neutron induced fission of 235U above 200 MeV. The neutron facility n_TOF offers the possibility to improve the situation. The measurement of 235U(n,f) relative to the differential n-p scattering cross-section, was carried out in September 2018 with the aim of providing accurate and precise cross section data in the energy range from 10 MeV up to 1 GeV. In such measurements, Recoil Proton Telescopes (RPTs) are used to measure the neutron flux while the fission events are detected and counted with dedicated detectors. In this paper the measurement campaign and the experimental set-up are illustrated.

“Acid spike” formation in the fast neutron radiolysis of supercritical water at 400 °C studied by Monte Carlo track chemistry simulations

A reliable understanding of radiolysis processes in supercritical water (SCW) cooled reactors is required to ensure optimal water chemistry control. In this perspective, Monte Carlo track chemistry simulations of the radiolysis of pure, deaerated SCW at 400 °C by 2 MeV mono-energetic neutrons were carried out as a function of water density between 0.15 and 0.6 g/cm3. The yields of hydronium ions (H3O+) formed at early time were obtained based on the G values calculated for the first three generated recoil protons. Combining our calculated G(H3O+) values with a cylindrical track model allowed us to estimate the concentrations of H3O+ and the corresponding pH values. An abrupt, transient, and highly acidic pH response (“acid spikes”) was observed at early times around the “native” fast neutron and recoil proton trajectories. This intra-track acidity was found to be strongest at times of less than a few tens to a hundred of picoseconds, depending on the value of the density considered (pH ∼ 1). At longer times, the pH gradually increased for all densities, finally reaching a constant value corresponding to the non-radiolytic, pre-irradiation concentration of H3O+, due to the autoprotolysis of water. Interestingly, the lower the density of the water, the longer the time required to reach this constant value. Because many in-core processes in nuclear reactors critically depend on the pH, the present work raises the question whether such highly acidic pH fluctuations, though local and transitory, could promote or contribute to corrosion and degradation of materials under proposed SCW-cooled reactor operating conditions.

Radiative corrections to elastic-electron proton scattering and uncertainty in proton charge radius

Higher-order QED radiative corrections to elastic electron-proton scattering are discussed. It is shown that they are relevant for high-precision experiments on proton form factor measurements. Analytic result are obtained for next-to-leading second order corrections to the electron line. Light pair corrections are taken into account. The role of the hadronic contribution to vacuum polarization is discussed. Numerical results are given for the conditions of the experiment on proton form factors performed by A1 Collaboration. Preliminary results are also shown for the set-up with reconstruction of momentum transfer from the recoil proton momentum.