Comparison of Coniferous Plantation Heights Using Unmanned Aerial Vehicle (UAV) Laser Scanning and Stereo Photogrammetry

Plantation forests play a critical role in forest products and ecosystems. Unmanned aerial vehicle (UAV) remote sensing has become a promising technology in forest related applications. The stand heights will reflect the growth and competition of individual trees in plantation. UAV laser scanning (ULS) and UAV stereo photogrammetry (USP) can both be used to estimate stand heights using different algorithms. Thus, this study aimed to deeply explore the variations of four kinds of stand heights including mean height, Lorey’s height, dominated height, and median height of coniferous plantations using different models based on ULS and USP data. In addition, the impacts of thinned point density of 30 pts to 10 pts, 5 pts, 1 pts, and 0.8 pts/m2 were also analyzed. Forest stand heights were estimated from ULS and USP data metrics by linear regression and the prediction accuracy was assessed by 10-fold cross validation. The results showed that the prediction accuracy of the stand heights using metrics from USP was basically as good as that of ULS. Lorey’s height had the highest prediction accuracy, followed by dominated height, mean height, and median height. The correlation between height percentiles metrics from ULS and USP increased with the increased height. Different stand heights had their corresponding best height percentiles as variables based on stand height characteristics. Furthermore, canopy height model (CHM)-based metrics performed slightly better than normalized point cloud (NPC)-based metrics. The USP was not able to extract exact terrain information in a continuous coniferous plantation for forest canopy cover (CC) over 0.49. The combination of USP and terrain from ULS can be used to estimate forest stand heights with high accuracy. In addition, the estimation accuracy of each forest stand height was slightly affected by point density, which can also be ignored.

Comparison of Forest Inventory Methods at Plot-Level between a Backpack Personal Laser Scanning (BPLS) and Conventional Equipment in Jeju Island, South Korea

In recent years, light detection and ranging (LiDAR) has been increasingly utilized to estimate forest resources. This study was conducted to identify the applicability of a LiDAR sensor for such estimations by comparing data on a tree’s position, height, and diameter at breast height (DBH) obtained using the sensor with those by existing forest inventory methods for a Cryptomeria japonica forest in Jeju Island, South Korea. For this purpose, a backpack personal laser scanning device (BPLS, Greenvalley International, Model D50) was employed in a protected forest, where cutting is not allowed, as a non-invasive means, simultaneously assessing the device’s field applicability. The data collected by the sensor were divided into seven different pathway variations, or “patterns” to consider the density of the sample plots and enhance the efficiency. The accuracy of estimating the variables of each tree was then assessed. The time spent acquiring and processing real-time data was also analyzed for each method, as well as total time and the time required for each measurement. The findings showed that the rate of detection of standing trees by LiDAR was 100%. Additionally, a high statistical accuracy was observed in pattern 5 (DBH: RMSE 1.22 cm, bias—0.90 cm, Height: RMSE 1.66 m, bias—1.18 m) and pattern 7 (DBH: RMSE 1.22 cm, bias—0.92 cm, Height: RMSE 1.48 m, bias—1.23 m) compared to the results from the typical inventory method. A range of 115–162.5 min/ha was required to process the data using the LiDAR, while 322.5–567.5 min was required for the typical inventory method. Thus, the application of a backpack personal LiDAR can lead to higher efficiency when conducting a forest resource inventory in a coniferous plantation with understory vegetation. Further research in various stands is necessary to confirm the efficiency of using backpack personal laser scanning.