Modified Camellia oleifera Shell Carbon with Enhanced Performance for the Adsorption of Cooking Fumes

Using Camellia oleifera shell (COS) as a raw material and phosphoric acid as the activator, activated Camellia oleifera shell carbon (COSC-0) was prepared and then modified by Fenton’s reagent (named as COSC-1). SEM, GC-MS, FTIR, and specific surface area and pore analyzers were used to study the adsorption performance of COS, COSC-0, and COSC-1 on cooking fumes. Results showed that COSC-1 was the best adsorbent compared with COS and COSC-0. The adsorption quantity and penetrating time of COSC-1 were 44.04 mg/g and 4.1 h, respectively. Most aldehydes could be adsorbed by COSC-1, which was due to the large number of carbonyl and carboxyl groups generated on the surface of COSC-1 from the action of Fenton’s reagent. The adsorption effect of COSC-1 on different types of pollutants in cooking fumes was analyzed based on the similar compatibility principle. COSC-1 showed a much higher adsorption effect on the strong polarity functional groups than on weak polar groups. The results provide a theoretical basis for the application of Camellia oleifera shell carbon adsorption technology in the treatment of cooking fumes.

Camellia oleifera shell as a potential agricultural by-product for paper production

The aim of this study was to investigate a potential biorefinery process to realize the high utilization of Camellia oleifera shell (COS), which is an agricultural by-product mainly composed of cellulose, hemicellulose, and lignin. Before treatment by steam explosion, the COS was impregnated with water, 3.0 wt% NaOH solution, or 3.0 wt% H2SO4 solution. The morphological structure and chemical composition of the steam-exploded COS pulp were investigated. The results indicated that the impregnation treatments increased the cellulose content of the steam-exploded COS pulp and decreased the hemicellulose and lignin content. The morphology of steam-exploded COS fiber was short, coarse and stiff. Hydrophobic and colorful handsheets were fabricated by mixing proportional bleached softwood fiber. This study demonstrated that COS was a potential material for the papermaking industry, and the combination of water impregnation and steam explosion treatment for COS was a good pulp process.

Removal of uranium(VI) from aqueous solution by Camellia oleifera shell-based activated carbon: adsorption equilibrium, kinetics, and thermodynamics

Camellia oleifera shell-based activated carbon (COSAC) was prepared by H3PO4 activation method and further used to remove U(VI) from the aqueous solution in a batch system. This research examined the influence of various factors affecting U(VI) removal, including contact time, pH, initial U(VI) concentration, and temperature. The results showed that the U(VI) adsorption capacity and removal efficiency reached 71.28 mg/g and 89.1% at the initial U(VI) concentration of 160 mg/L, temperature of 298 K, pH 5.5, contact time of 60 min, and COSAC dosage of 2.0 g/L. The pseudo-first-order, pseudo-second-order, and intraparticle diffusion equations were used to identify the optimum model that can describe the U(VI) adsorption kinetics. The pseudo-second-order kinetics model performed better in characterizing the adsorption system compared with the pseudo-first-order and intraparticle diffusion models. Isotherm data were also discussed with regard to the appropriacy of Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich models. The Langmuir model described the U(VI) adsorption process the best with a maximum adsorption capacity of 78.93 mg/g. Thermodynamic analysis (ΔG0 < 0, ΔH0 > 0, and ΔS0 > 0) indicated that the U(VI) adsorption process is endothermic and spontaneous. All the results imply that COSAC has a promising application in the removal or recovery of U(VI) from aqueous solutions.