scholarly journals Preparation and Properties of Autocatalytic Biobased Waterborne Polyol from Rosin Based Epoxy Resin

2022 ◽  
Author(s):  
Guomin Wu ◽  
Jian Chen ◽  
Zhaozhe Yang ◽  
Can Jin ◽  
Guifeng Liu ◽  
...  
Keyword(s):  
Epoxy Resin ◽  
Tertiary Amine ◽  
Reaction Rate ◽  
Waterborne Polyurethane ◽  
Crosslinking Reaction ◽  
Forming Process ◽  
Waterborne Coatings ◽  
Ft Ir ◽  
Amine Groups ◽  
Heterogeneous Film

Abstract Due to the complex heterogeneous film forming process of two-component waterborne polyurethane (2K-WPU), the crosslinking reaction rate of 2K-WPU cannot meet the demand of efficient application in coatings. In order to improve the crosslinking reaction rate of 2K-WPU, a waterborne polyol containing tertiary amine groups was synthesized from rosin based epoxy resin and secondary amine compound, and then autocatalytic 2K-WPU was prepared by crosslinking the rosin based waterborne amino polyol with polyisocyanate. The structure of the polyol from rosin based epoxy resin was characterized with Fourier infrared (FT-IR) and nuclear magnetic resonance (NMR). The crosslinking kinetics and the crosslinked product of the rosin based waterborne amino polyol were also compared with a commercial acrylic polyol. It was shown from the results that the crosslinking reaction rate of the rosin based waterborne amino polyol was faster than that of the commercial acrylic polyol, which indicated the tertiary amine groups chemically bonded in the rosin based polyols could autocatalyze the crosslinking reaction of 2K-WPUs with catalysts free. The film of the rosin based waterborne amino polyol had excellent impact strength, adhesion, flexibility, hardness, gloss, fullness and solvent resistance, showing a good application prospect in the field of waterborne coatings.

Preparation and Application of Blocked & Crosslinked Waterborne Polyurethane Microemulsion as Paper Strengthening Agent

2014 ◽  
Vol 989-994 ◽  
pp. 644-647
Author(s):  
Xiao Juan Lai ◽  
Mi Na Gong ◽  
Lei Wang
Keyword(s):  
Molecular Structure ◽  
Bisphenol A ◽  
Tertiary Amine ◽  
Waterborne Polyurethane ◽  
Imidazole Ring ◽  
Amine Group ◽  
Paper Strength ◽  
Isophorone Diisocyanate ◽  
Wet Strength ◽  
Amine Groups

By means of self-emulsifying, blocked & crosslinked cationic polyurethane (CBPU) microemulsion was prepared with isophorone diisocyanate (IPDI), polycaprolactone glycol, bisphenol A, methyldiethanolamine (MDEA) as cationic hydrophilic chain-extending agent, ̴̵̹̹̱̼̽͊̿˰̱̓˰̷̲̼̳̻̹̿̾˰̷̵̱̾̈́˰̴̱̾˰̞˽̫˸́˼́˽̴̵̸̹͉̼̽̈́˽̂˽̵̱̳͉̼̈́˹̵̸͉̼̭̈́˽ڂ˽̴̸̴̵̸̹͉͈͉͉̼̱̹͂̿̈́̽̾̿˰̴̵̱̱̹̀͂̿̀̾̽˸̠̔̔˹˰̱̓˰̷̳̼̹̻̹͂̿̓̓̾̾˰̷̵̱̾̈́˾˰̶̶̵̳̈́̓̕˰̶̿˰̸̵̈́˰̠̥̓̒˰̵̴̲̼̳̻̿˰̱̹͂̈́̿˰̿̾˰̸̵̈́˰̸͉̹̳̱̼̀̓˰̵̵̹̀͂̿̀͂̈́̓˰̶̿˰̸̵̈́˰̵̵̴̱̈́͂̈́˰̵̱̀̀͂˰̵̵͇͂˰̴̵̴̹̓̈́ͅ˾˰̸̵̤˰̵̵̵͈̹̱̼̀͂̽̾̈́˰̵̼͂̓̈́̓ͅ˰̸͇̓̿˰̓̈́͂uctures of tertiary amine group, imidazole ring and urethane group are found in CBPU molecular structure. The morphology of the particle is uniform spheric structure and its size is related to the content of tertiary amine groups of CBPU. The paper strength, especially the wet strength can be obviously increased with the increasing of the blocked ratio of CBPU. The optimum blocked ratio of CBPU is 10%.

Preparation and Characterization of Fluorinated Epoxy Resin Emulsion for Waterborne Coatings

2011 ◽  
Vol 347-353 ◽  
pp. 4065-4068
Author(s):  
Wen Lu Guo ◽  
Hong Chun Zhou ◽  
Han Qing Lu ◽  
Wei Hu
Keyword(s):  
Contact Angle ◽  
Particle Size ◽  
Epoxy Resin ◽  
Average Particle Size ◽  
Average Particle ◽  
Waterborne Coatings ◽  
Orthogonal Experiments ◽  
Ft Ir ◽  
Emulsion Particle ◽  
Different Content

Under the action of initiator(BPO), the α-methyl acrylic acid (α-MAA), butyl hexafluorobutyl methacrylate (HFMA) and other monomers are graft copolymerized into epoxy molecular. By adding N, N-dimethyl ethanolamine, fluorine-containing water-based epoxy resin emulsion can be prepared. By orthogonal experiments, the amount of acrylic monomer, BPO dosage, grafting temperature and other optimum conditions can be determined. Infrared spectroscopy (FT-IR) characterization confirms acrylic monomers successfully grafted to the epoxy resin molecules. The study focuses on the effect of different content of HFMA on modified emulsion particle size and contact angle of coating. The results shows that the introduction of HFMA monomer made the smallest average particle size of emulsion low to 165 nm, and the contact angle against water is increased by 20°. After determining the conventional and environmental performance of the emulsion, the results shows that this preparation of epoxy resin emulsion can fully meet the requirements of waterborne coatings.

Study on Synthesis of a Ampholytic Polyphenylene Sulfide (PPS)

2012 ◽  
Vol 550-553 ◽  
pp. 757-761
Author(s):  
Hui Xiao ◽  
Rui Hai Li
Keyword(s):  
Tertiary Amine ◽  
Quaternary Ammonium ◽  
Polyphenylene Sulfide ◽  
Structure And Properties ◽  
Acid Base ◽  
Sulfonation Degree ◽  
Quaternary Ammonium Group ◽  
Ft Ir ◽  
Amine Groups ◽  
G Ratio

Ampholytic Polyphenylene Sulfide (PPS) was prepared from PPS by sulfonation, followed by bromination and then the substitution of bromine by quaternary ammonium group and tertiary amine group.The structure and properties of polymers were characterized by FT-IR, TGA, UV and isoelectric point(IEP) measurement. The degree of sulfonation and the content of bromide were investigated by acid base titration and Mohr Method respectively. The results indicated that 47.6% sulfonation degree at 4h, 105°C and a 15ml/g ratio of oluem and PPS, 35.25% content of bromide at 4h, 40°C and 4% FeCl3. Bromine is completely substituted by quaternary ammonium groups at a 1:1.2 ratio of P-SO3-Br and volume of trimethylamine,70°C and 4 h,and that by tertiary amine groups at a 1:1.2 ratio of P-SO3-Br and volume of dimethylamine,80°C and 4 h. Ampholytic PPS shows better solubility and thermostability than PPS.Hyperchromic effect: Br < NH(CH3)2 < N(CH3)3. The IEP of P-SO3-TMA and P-SO3-DMA are 4.08 and 3.84 respectively.

Crosslinking reaction and properties of two-component waterborne polyurethane from terpene-maleic ester type epoxy resin

2012 ◽  
Vol 128 (1) ◽  
pp. 132-138 ◽  
Author(s):  
Guo-min Wu ◽  
Zhen-wu Kong ◽  
Cai-feng Chen ◽  
Jian Chen ◽  
Shu-ping Huo ◽  
...  
Keyword(s):  
Epoxy Resin ◽  
Waterborne Polyurethane ◽  
Crosslinking Reaction ◽  
Two Component

scholarly journals Electrochemiluminescence Enhancement and Particle Structure Stabilization of Polymer Nanoparticle by Doping Anionic Polyelectrolyte and Cationic Polymer Containing Tertiary Amine Groups and Its Highly Sensitive Immunoanalysis

Processes ◽  
2020 ◽  
Vol 8 (9) ◽  
pp. 1054
Author(s):  
Noor Ul Ain ◽  
Tian-Yu Wang ◽  
Xiao-Ning Wu ◽  
Tong-Hong Wei ◽  
Jing-Shuo Zhang ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Tertiary Amine ◽  
Hepatitis B Surface Antigen ◽  
Particle Diameter ◽  
Cationic Polymer ◽  
Suspension Stability ◽  
Good Precision ◽  
Polymer Nanoparticle ◽  
Anionic Polyelectrolyte ◽  
Amine Groups

A doped polymer nanoparticle (dPNP) of electrochemiluminescence (ECL) was prepared via doping the anionic polyelectrolyte polyacrylic acid (PAA) and the cationic polymer poly-ethyleneimine (PEI) into the polymer nanoparticle (PNP), which was self-assembled by Ru(bpy)32+ derivative-grafted PAA (PAA–Ru) with both cations and anions. The good electrical conductivity of the doped polyelectrolyte PAA enhanced the ECL intensity of PNP to 109.1%, and the involvement of a large number of tertiary amine groups of the doped PEI further enhanced that to 127.3%; meanwhile, doping low-molecular-weight PEI into PNP, while simultaneously doping high-molecular-weight PAA, avoided the precipitation of PAA and PEI, due to interaction of the two oppositely charged polymers; and these also made the self-assembly procedure more effective and the nanoparticle structure more stable than PNP and also led to the production of rich residual PAA chains on the surface of dPNP. The storage results showed that the average hydrated particle diameter kept almost constant (197.5–213.1 nm) during 15-day storage and that the nanoparticles have rich surface charge of −11.47 mV (zeta potential), well suspension stability and good dispersity without detectable aggregation in the solution during the storage. Therefore, the nanoparticle is quite suitable for the antibody labeling, immunoassay and the storage. As a result, a high-sensitive ECL immunoassay approach with good precision, accuracy and selectivity was established and an ultra-low detection limit of 0.049 pg mL−1 (S/N = 3) for magnetic bead-based detection of Hepatitis B surface antigen was observed.

Studies on Thermal Property of Silica Aerogel/Epoxy Composite

2007 ◽  
Vol 546-549 ◽  
pp. 1581-1584 ◽  
Author(s):  
Jiu Peng Zhao ◽  
Deng Teng Ge ◽  
Sai Lei Zhang ◽  
Xi Long Wei
Keyword(s):  
Thermal Conductivity ◽  
Thermal Property ◽  
Epoxy Resin ◽  
Silica Aerogel ◽  
Epoxy Composite ◽  
Transfer Model ◽  
Insulation Material ◽  
Thermal Transfer ◽  
Heat Distortion Temperature ◽  
Ft Ir

Silica aerogel/epoxy composite, a kind of efficient thermal insulation material, was prepared by doping silica aerogel of different sizes into epoxy resin through thermocuring process. The results of thermal experiments showed that silica aerogel/epoxy composite had a lower thermal conductivity (0.105W/(m·k) at 60 wt% silica aerogel) and higher serviceability temperature (Martens heat distortion temperature: 160°C at 20 wt% silica aerogel). In addition, the composite doping larger size (0.2-2mm) of silica aerogel particle had lower thermal conductivity and higher Martens heat distortion temperature. Based on the results of SEM and FT-IR, the thermal transfer model was established. Thermal transfer mechanism and the reasons of higher Martens heat distortion temperature have been discussed respectively.

scholarly journals SCREENING FOR PHYTOCHEMICALS AND FTIR ANALYSIS OF MYRISTICA DACTYLOIDS FRUIT EXTRACTS

2016 ◽  
Vol 9 (1) ◽  
pp. 315 ◽  
Author(s):  
P. Rajiv ◽  
A. Deepa ◽  
P. Vanathi ◽  
D. Vidhya
Keyword(s):  
Fourier Transform ◽  
Methanolic Extract ◽  
Phytochemical Analysis ◽  
Ftir Analysis ◽  
Spectroscopy Analysis ◽  
Standard Methods ◽  
Fruit Extracts ◽  
Ft Ir ◽  
Amine Groups ◽  
Ir Analysis

<p><strong>Objective: </strong>The present investigation focus on screening of phytochemicals and FT-IR analysis of <em>Myristica dactyloids </em>fruit extracts. The fruit extracts were prepared using five different solvents.</p><p><strong>Methods: </strong>The phytochemical analysis and FT-IR (Fourier transform infrared spectroscopy) analysis were performed using standard methods.</p><p><strong>Results: </strong>The results reveals that the alkaloids, steroids, flavonoids, phenolic compounds, proteins, carbohydrates, cardio glycosides and saponins were present in methanolic extract when compared to other solvent extracts. FT-IR analysis shows the presence of different functional groups such as carboxylic acids, aromatics, alkanes, alcohols, phenols, aliphatic amines, alkenes and amine groups in the fruit extracts.</p><p><strong>Conclusion: </strong>The study concluded that the methanolic extract (<em>M. dactyloides </em>fruit) has potential bioactive compounds.</p>

Synthesis of a novel phosphazene-based flame retardant with active amine groups and its application in reducing the fire hazard of Epoxy Resin

2019 ◽  
Vol 366 ◽  
pp. 78-87 ◽  
Author(s):  
Guang Yang ◽  
Wei-Hong Wu ◽  
Yong-Hui Wang ◽  
Yun-Hong Jiao ◽  
Liang-Yao Lu ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Epoxy Resin ◽  
Fire Hazard ◽  
Amine Groups
Sign in / Sign up

Export Citation Format

Share Document