New Synthetic Cathinones and Phenylethylamine Derivatives Analysis in Hair: A Review

The analysis of psychoactive substances in hair is of great importance for both clinical and forensic toxicologists since it allows one to evaluate past and continuative exposure to xenobiotics. In particular, a new challenge is represented by new psychoactive substances: Among this new class of drugs of abuse, synthetic cathinone and phenethylamine derivatives are often detected in biological samples. Hence, there is a growing need to develop new analytical procedures or improve old ones in order to conduct evaluations of these emerging substances. This study is a systematic review of all the instrumental and experimental data available in the literature. A total of 32 articles were included in the review. Acidic solvents proved to be the most reliable solutions for extraction. Gas chromatography and liquid chromatography coupled to tandem mass spectrometric and high-resolution mass spectrometric systems represent the majority of the involved instrumental techniques. Sensitivity must be maintained at the pg/mg level to detect any occurrences up to occasional consumption. In total, 23 out of 32 articles reported real positive samples. The most frequently detected substance in hair was mephedrone, followed by butylone, methylone, MDPV, and α-pyrrolidinophenone-type substances.

Removal of Micropollutants by Ozone-Based Processes

Micropollutants and emerging substances pose a serious problem to environmental sustainability and remediation, due to their widespread use and applications in everyday life. This group of chemicals is diverse but with common toxic and harmful properties. Their concentration in the environment is often very low; however, due to their recalcitrant nature, they are persistent in air, water, and soil. From an engineering point of view, the challenge is not straightforward. It is difficult to remove these contaminants from complex mixtures of substances by conventional methods used in wastewater and drinking water treatment. Ozonation and ozone-based AOPs are accepted processes of degradation of resistant substances or at least enhancement of their biodegradability. The aim of this review paper is to present research trends aimed at solving problems in the research and application of ozone-based processes in the removal of micropollutants from wastewater, thus preventing leakage of harmful substances into surface water, soil, and groundwater and facilitating the reuse of wastewater. Priority substances, micropollutants and emerging pollutants, as well as processes and technologies for their transformation and elimination, are briefly specified. Results obtained by the authors in solving research projects that were aimed at eliminating selected micropollutants by ozonation and ozone-based AOPs are also presented. This review focuses on selected alkylphenols, petroleum substances, and organochlorine pesticides.

Mechanisms of Action of Prebiotics and Their Effects on Gastro-Intestinal Disorders in Adults

In recent years, research has focused on the use of dietary fibers and prebiotics, since many of these polysaccharides can be metabolized by intestinal microbiota, leading to the production of short-chain fatty acids. The metabolites of prebiotic fermentation also show anti-inflammatory and immunomodulatory capabilities, suggesting an interesting role in the treatment of several pathological conditions. Galacto-oligosaccharide and short- and long-chain fructans (Fructo-oligosaccharides and inulin) are the most studied prebiotics, even if other dietary compounds seem to show the same features. There is an increasing interest in dietary strategies to modulate microbiota. The aim of this review is to explore the mechanisms of action of prebiotics and their effects on the principal gastro-intestinal disorders in adults, with a special focus on Galacto-oligosaccharides, Fructo-oligosaccharides, lactulose and new emerging substances which currently have evidence of prebiotics effects, such as xilooligosaccharides, soybean oligosaccharides, isomaltooligosaccharides, lactobionic acid, resistant starch and polyphenols.

Case Report: Synthetic Cannabinoid Deaths in State of Florida Prisoners

Between March 2017 and November 2018, 54 prisoner fatal overdose cases submitted to the University of Florida Forensic Toxicology Laboratory involved synthetic cannabinoids including 5F-ADB, FUB-AMB, 5F-AMB, MDMB-FUBINACA and AB-CHMINACA. Analysis of blood and urine samples was performed at NMS Labs (Horsham, PA) by liquid chromatography/tandem mass spectrometry screening, confirmatory and quantitative methods validated according to Scientific Working Group for Forensic Toxicology guidelines. This work highlights the importance of effective communication between toxicologists and medical examiners/coroners, and the value of public-private partnerships to provide coverage while laboratories work to update instrumentation and validate their own new methods to keep up with the challenges of emerging substances.

Sustainable treatment systems for removal of pharmaceutical residues and other priority persistent substances

Pharmaceutical residues and other emerging substances commonly summarised as micropollutants pass through wastewater treatment plants (WWTPs) and end up in the receiving waters and sludge. Many studies have investigated the removal efficiency of various techniques but a holistic evaluation of various relevant treatment alternatives regarding both the removal efficiency for various micropollutants, investment and operating costs, environmental impacts and future comprehensiveness is still lacking. This paper provides the results from a large 3-year project about the evaluation of sustainable treatment systems for removal of various micropollutants or disruptive effects at Swedish WWTPs and their environmental, economic and future sustainability. The presented results are based on our own pilot tests and related assessment and modelling efforts and provide a holistic view on advanced treatment of wastewater for removal of micropollutants.

EMERGING HAZARDOUS SUBSTANCES IN OUTDOOR AND INDOOR ENVIRONMENT. STATE OF THE ART. CURRENT AND PAST RESEARCH.

The state of the art of contamination by hazardous emerging substances (HEMS) in the outdoor and indoor environment based on the original resultsof authors and key literature references is presented. History of the newly-recognized group of HEMS is described. The key physico-chemical characteristics of HEMS are emphesized, especially pseudoperzistency of HEMS, non monotonic dose response, chemical cocktails, irreversible binding to proteins, following by constants of partitioning and distribution and different forms of HEMS species in the aquatic environment (molecules, ions, cations and anions, and zwitter ions). Within this study review, representative original results of HEMS detected in the river Danube in the vicinity of Novi Sad,waste water, air and human milk are compiled, gained by numerous international and national projects, more than 30 papers published in the SCI journals and 40 full length papers printed at international and national conferences. Based on concentration levels of HEMS, for the selected HEMS, risk assessment and RQ coefficients were calculated. Key words: emerging substances, wastewater, Danube surface water, air, human milk, risk assessment

Technology for the Remediation of Water Pollution: A Review on the Fabrication of Metal Organic Frameworks

The ineffective control of the release of pollutants into water has led to serious water pollution. Compared with conditions in the past, the polluting components in aquatic environments have become increasingly complex. Some emerging substances have led to a new threat to the safety of water. Therefore, developing cost-effective technologies for the remediation of water pollution is urgently needed. Adsorption has been considered the most effective operational unit in water treatment processes and thus adsorption materials have gained wide attention. Among them, metal organic frameworks (denoted as MOFs) have been rapidly developed in recent years due to their unique physicochemical performance. They are characterized by larger porosity and larger specific surface area, easier pore structure designing, and comfortable structural modification. In many fields such as adsorption, separation, storage, and transportation, MOFs show a better performance than conventional adsorption materials such as active carbon. Their performance is often dependent on their structural distribution. To optimize the use of MOFs, their fabrication should be given more attention, without being limited to conventional preparation methods. Alternative preparation methods are given in this review, such as diffusion, solvent thermal, microwave, and ion thermal synthesis. Furthermore, developing functionalized MOFs is an available option to improve the removal efficiencies of a specific contaminant through pre-synthetic modification and post-synthesis modification. Post-synthesis modification has become a recent research hotspot. The coupling of MOFs with other techniques would be another option to ameliorate the remediation of water pollution. On one hand, their intrinsic drawbacks may be reduced. On the other hand, their performance may be enhanced due to their interaction behaviors. Overall, such coupling technologies are able to enhance the performance of an individual material. Because the excellent performance of MOF materials has been widely recognized and their developments have received wide attention, especially in environmental fields, in the present work we provide a review of fabrication of MOFs so as to motivate readers to deepen their understanding of the use of MOFs.