Study on catalytic properties of graphene/molybdenum sulfide under near-infrared light irradiation

Graphene/MoS2 hybrid material was prepared by the hydrothermal method. The hybrid material was characterized by X-ray diffraction spectrum, Raman spectra, transmission electron microscope and UV-vis-NIRS. It was used as a near-infrared photocatalyst to catalyze and degrade Rhodamine B (RhB). The results showed that when the concentration of the RhB solution was 50.0 mg·L–1, the pH value of the solution was 7, the volume of the solution was 50.0 mL, the amount of G/MoS2 catalyst was 0.05 g and near-infrared radiation was carried out for 3 h, the degradation rate of RhB in the 50 mL solution reached 96.5%. When MoS2 was used as the photocatalyst, the degradation rate of RhB was only 75.5%. After 5 times of recycling, the catalytic efficiency of the hybrid photocatalyst was still more than 90%, indicating that the catalyst is very stable.

Polar hydrogen species mediated nitroarenes selective reduction to anilines over an [FeMo]Sx catalyst

We herein present an efficient approach for the chemoselective synthesis of arylamines from nitroarenes and hydrazine over an iron-molybdenum sulfide catalyst ([FeMo]Sx).

MXene-supported copper-molybdenum sulfide nanostructures as catalysts for hydrogen evolution

The synthesis and enhanced HER performance of Cu2MoS4/Ti3C2Tx-30% was demonstrated.

Lattice Distortion of Crystalline-amorphous nickel molybdenum sulfide nanosheets for high-efficiency overall water splitting: lone pair electrons’ libraries and in-suit surface reconstitution

Lattice distortion is an important way to improve the electrocatalytic performance and stability of two-dimensional transition metal materials (2d-TMSs). Herein, a lattice distortion nickel-molybdenum sulfide electrocatalyst on foam nickel (NiMoS4-12/NF)...

Cost-Effective 1T-MoS2 Grown on Graphite Cathode Materials for High-Temperature Rechargeable Aluminum Ion Batteries and Hydrogen Evolution in Water Splitting

The high dependence on and high cost of lithium has led to a search for alternative materials. Aluminum ion batteries (AIBs) have gained interest due to their abundance, low cost, and high capacity. However, the use of the expensive 1-ethyl-3-methylimidazolium chloride (EMIC) electrolyte in AIBs curtails its wide application. Recently, high-temperature batteries have also gained much attention owing to their high demand by industries. Herein, we introduce cost-effective 1T molybdenum sulfide grown on SP-1 graphite powder (1T-MoS2/SP-1) as a cathode material for high-temperature AIBs using the AlCl3-urea eutectic electrolyte (1T-MoS2/SP-1–urea system). The AIB using the 1T-MoS2/SP-1–urea system exhibited a capacity as high as 200 mAh/g with high efficiency of 99% over 100 cycles at 60 °C when cycled at the rate of 100 mA/g. However, the AIB displayed a capacity of 105 mAh/g when cycled at room temperature. The enhanced performance of the 1T-MoS2/SP-1–urea system is attributed to reduced viscosity of the AlCl3-urea eutectic electrolyte at higher temperatures with high compatibility of 1T-MoS2 with SP-1. Moreover, the electrocatalytic lithiation of 1T-MoS2 and its effect on the hydrogen evolution reaction were also investigated. We believe that our work can act as a beacon for finding alternative, cost-effective, and high-temperature batteries.