A Review on Various Methodologies for AC Duct Cleaning

Cleaning of the AC ducts is the need because it creates problems such as the bad indoor air quality which results in health issues and it also causes the large maintenance of the system. The uncleaned air ducts become home for fungi, dust and harmful microbial. The causes and effects of this thing are mentioned following. The AC ducts can be cleaned through various methodologies i.e. conventional and by using robots. In the conventional system, there is manual cleaning by using some equipment. Cleaning the ducts by using robots would be a good solution for this. Different types of robot systems i.e. crawling robot, articulated robot and inspection robot are deployed for the application. There are different types of robots and their equipment according to size and type of duct. The cleaning of rectangular shape ducts is quite difficult than others. Finally, it results that cleaning ducts is the most important thing and using robots is the best methodology for it.

A Glance on Radiant Cooling Technology for Heating and Cooling for Residential and Commercial Building Application

As we know that nowadays due to the hot and humid weather and the increasing temperature the high amount of energy consumption is used for the heating & cooling purpose in residential as well as in commercial building for air conditioning systems. To overcome this problem and to reduce the energy consumption as well as good thermal comfort to people in the indoor environment, use the radiant heating & cooling system is a better way. This concept is used to cool or heat the room and absorbs the indoor sensible heat by thermal radiation. The system removes heat by using less energy and more energy-efficient. This system uses water as a medium to cool or heat the room space. There are three types discussed in these papers for cooling & heating. In this paper, we did an overall study regarding radiant heating and cooling systems. It reduces the energy lost due to the duct leakage. It also has a lower life cycle cost compared to conventional. In this paper, we have reviewed how to reduce energy consumption and give thermal comfortable air-condition through radiant cooling and chilled ceiling panel system.

Indoor Air Quality Based Economizer and Energy Recovery Wheel Trainer Construction

Indoor Air Quality is one of the important factors in heating, ventilation, and air conditioning industry. In the many years as growing, industrialisation and scientific researches have indicated that the air within the indoor air can be more seriously polluted than the outdoor air. In recent years, pollution caused by indoor decoration has become more and more serious. As most people spend about 90% of their time indoors, the influence of indoor air contamination is long-termed and consecutive. There are many indoor toxicants can potentially cause and lead to a variety of health diseases like as dysesthesia, mental health issue, transient morbidity, disability and even death in extreme cases. also, it gives birth to new viruses, germs that cause human being. For this condition, we are using the economizer trainer and the purge wheel for the betterment of the indoor air quality and improve efficiency. The energy recovery wheel plays an important roll in this indoor air quality based economizer by using the filtration like odour filtration and gas-phase filtration we can control the chemical component and odour in the air quality.

Indirect Evaporative Cooling: An Efficient and Convenient Energy System

Evaporative cooling is now an alternative method for the conventional air cooling method. This method does not only save energy but also protect the environment from global warming and hazardous gases. Thus this system is highly efficient and eco-friendly. Evaporative cooling system is further divided into two categories that are direct evaporative cooling system and an indirect evaporative cooling system. The direct evaporative cooling system is not much efficient due to high wet bulb temperature and moisture thus rather than using the direct evaporative cooling system the indirect evaporative cooling system is preferred. This paper discusses comparative studies of performance, working principles, material selection criteria’s and various methods. It also explains the performance under different weather conditions, hybrid structure to reduce the load on the further system. It summarises various aspects like wick attained aluminium sheet is the best material for IEC or counter-flow heat exchanger is effective than parallel-flow heat exchanger. It finally results that indirect evaporative cooling system is moisture free, very effective and environment savings. That can be used in various residential and commercial sectors effectively as an alternative for conventional energy-consuming system.