Influence of Fiber Content in the Water Absorption and Mechanical Properties of Sisal Fiber Powder Composites

2020 ◽  
pp. 369-380
Author(s):  
KÁtia Melo ◽  
Thiago Santos ◽  
Caroliny Santos ◽  
Rubens Fonseca ◽  
Nestor Dantas ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Fiber Content ◽  
Sisal Fiber ◽  
Powder Composites

Experimental Analysis of Styrene, Particle Size, and Fiber Content in the Mechanical Properties of Sisal Fiber Powder Composites

2020 ◽  
pp. 351-367 ◽  
Author(s):  
KÁtia Melo ◽  
Thiago Santos ◽  
Caroliny Santos ◽  
Rubens Fonseca ◽  
Nestor Dantas ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Particle Size ◽  
Experimental Analysis ◽  
Fiber Content ◽  
Sisal Fiber ◽  
Powder Composites

scholarly journals Investigations on the Mechanical Properties of Glass Fiber/Sisal Fiber/Chitosan Reinforced Hybrid Polymer Sandwich Composite Scaffolds for Bone Fracture Fixation Applications

Polymers ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1501 ◽  
Author(s):  
Soundhar Arumugam ◽  
Jayakrishna Kandasamy ◽  
Ain Umaira Md Shah ◽  
Mohamed Thariq Hameed Sultan ◽  
Syafiqah Nur Azrie Safri ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Glass Fiber ◽  
Bone Fracture ◽  
Hybrid Composite ◽  
Bone Structure ◽  
Hybrid Composites ◽  
Sisal Fiber ◽  
Composite Scaffolds ◽  
Study Results

This study aims to explore the mechanical properties of hybrid glass fiber (GF)/sisal fiber (SF)/chitosan (CTS) composite material for orthopedic long bone plate applications. The GF/SF/CTS hybrid composite possesses a unique sandwich structure and comprises GF/CTS/epoxy as the external layers and SF/CTS/epoxy as the inner layers. The composite plate resembles the human bone structure (spongy internal cancellous matrix and rigid external cortical). The mechanical properties of the prepared hybrid sandwich composites samples were evaluated using tensile, flexural, micro hardness, and compression tests. The scanning electron microscopic (SEM) images were studied to analyze the failure mechanism of these composite samples. Besides, contact angle (CA) and water absorption tests were conducted using the sessile drop method to examine the wettability properties of the SF/CTS/epoxy and GF/SF/CTS/epoxy composites. Additionally, the porosity of the GF/SF/CTS composite scaffold samples were determined by using the ethanol infiltration method. The mechanical test results show that the GF/SF/CTS hybrid composites exhibit the bending strength of 343 MPa, ultimate tensile strength of 146 MPa, and compressive strength of 380 MPa with higher Young’s modulus in the bending tests (21.56 GPa) compared to the tensile (6646 MPa) and compressive modulus (2046 MPa). Wettability study results reveal that the GF/SF/CTS composite scaffolds were hydrophobic (CA = 92.41° ± 1.71°) with less water absorption of 3.436% compared to the SF/CTS composites (6.953%). The SF/CTS composites show a hydrophilic character (CA = 54.28° ± 3.06°). The experimental tests prove that the GF/SF/CTS hybrid composite can be used for orthopedic bone fracture plate applications in future.

scholarly journals Effect of Temperature and Sisal Fiber Content on the Properties of Plaster of Paris

2018 ◽  
Vol 7 (4.20) ◽  
pp. 205 ◽  
Author(s):  
Aqil M. ALmusawi ◽  
Thulfiqar S. Hussein ◽  
Muhaned A. Shallal
Keyword(s):  
Mechanical Properties ◽  
Elevated Temperatures ◽  
Physical And Mechanical Properties ◽  
Fiber Content ◽  
Sisal Fiber ◽  
Effect Of Temperature ◽  
Plaster Of Paris ◽  
Micro Cracks ◽  
Recent Developments ◽  
Negative Effect

Recent developments in the production of ecologically friendly building composites have led to a renewed interest in the use of vegetable fibers as a reinforcement element. Traditional pure Plaster of Paris (POP) can suffer from the development of micro-cracks due to thermal expansion. Therefore, sisal fiber was studied for its potential as an ecological element to restrict and delay the development of micro-cracks in POP. Different sisal proportions of 0, 2, 4, 6, 8 and 10 wt. % of POP were used to characterize the physical and mechanical properties of POP at the ambient temperature. Then, the effects of temperatures of 25, 100, 200, 300, 400 and 500  were investigated. Results proved that the composite of 10% sisal fiber had the best mechanical properties. Also, when the fiber content was increased, the composite’s performance was enhanced, becoming better able to resist elevated temperatures. However, raising the temperature to 300 or above had a negative effect on the mechanical properties, which were significantly decreased due to the degradation of the sisal fiber. 

Mechanical characterization of polylactic acid reinforced bagasse/basalt hybrid fiber composites

2018 ◽  
Vol 53 (1) ◽  
pp. 33-43 ◽  
Author(s):  
Francis L King ◽  
A Arul Jeya Kumar ◽  
Srinivasan Vijayaragahavan
Keyword(s):  
Mechanical Properties ◽  
Mechanical Behavior ◽  
Water Absorption ◽  
Polylactic Acid ◽  
Fiber Composite ◽  
Basalt Fiber ◽  
Fiber Content ◽  
Interfacial Bonding ◽  
Weight Percentage ◽  
Bagasse Fiber

This paper focuses on the mechanical behavior of Polylatic acid reinforced Basalt and Bagasse fibers. The most important aspect in formulating this hybrid composite with better mechanical properties is the optimization of interfacial bonding between the reinforcing bagasse fiber and basalt fiber and polymer matrix. The composite of different weight proportion of the materials is compounded using twin screw extruder. The specimens were prepared by injection molding and subjected to various mechanical testing under tensile, flexural, and impact loads. It was found that 84 wt% of polylactic acid, 12 wt% of Basalt fiber and 4 wt% of Bagasse fiber composite exhibits better mechanical properties compared to other composites taken for study in this research. The better tensile, flexural, and impact strength of 52.8 MPa, 82.2 MPa, and 3.39 KJ/m2 were observed. The results show that the fiber content in weight percentage is playing a major than the fiber length on the improvement of tensile, flexural, and impact properties. The mechanical behavior obtained through experiments witnessed that Bagasse/Basalt fiber reinforcement in polylactic acid composites can be used as medium-load applications because of its low cost and ease of decomposability. The scanning electron microscope photography of the tested specimens shows better interfacial bonding between matrix and fibers. Also, the water absorption test indicates increase in fiber content increases the water absorption rate, reveals good degradation property of the composite. Additionally, the use of Bagasse fiber promotes the degradation of the material after its life time.

Effect of Water Absorption on Mechanical Properties of Hemp Fiber Reinforced Composite

2009 ◽  
Vol 417-418 ◽  
pp. 161-164 ◽  
Author(s):  
Kenichi Takemura
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Absorption Rate ◽  
Strength Reduction ◽  
Fiber Content ◽  
Hemp Fiber ◽  
Absorption Time ◽  
Dry Process ◽  
Water Absorption Rate ◽  
Effect Of Water

In this study, the effect of water absorption on mechanical properties of hemp fiber reinforced green composite(HGC) was examined. Plain woven hemp fabric was used as reinforcement. Emulsion type biodegradable resin was used as matrix. The composite was made by compression molding method. Water absorption rate and the effect of the ratio on the mechanical properties were examined. Following results are obtained. The water absorption rate increased with an increase of absorption time. The water absorption rate had an equilibrium state within 30 days. The duration was not dependent on fiber content. In the case of that specimen was kept in water 182 days, the strength decreased 70% of the ultimate one. But in the case that the specimen has dry process after water absorption process, the strength recovered 57%. The recovery ratio is not dependent on water absorption time. The strength reduction rate after dry process is not dependent on fiber content. The strength of resin decreased 62%, and the strength of fiber decreased 13% by water absorption. So the strength reduction of the composite is due to the effect of matrix.

Sign in / Sign up

Export Citation Format

Share Document