Cure characteristics and physical properties of ground-rubber-filled natural rubber vulcanizates: Effects of the curing systems of the ground rubber and rubber matrix

2007 ◽  
Vol 105 (4) ◽  
pp. 2396-2406 ◽  
Author(s):  
S. W. Kim ◽  
H. Y. Park ◽  
J. C. Lim ◽  
I. R. Jeon ◽  
K. H. Seo
Keyword(s):  
Natural Rubber ◽  
Physical Properties ◽  
Rubber Matrix ◽  
Cure Characteristics ◽  
Ground Rubber ◽  
Natural Rubber Vulcanizates ◽  
Curing Systems

Effects of Cure Systems of Ground Rubber and Rubber Matrix on their Adhesion and Crosslink Structures

2006 ◽  
Vol 79 (5) ◽  
pp. 806-819 ◽  
Author(s):  
S. W. Kim ◽  
H. Y. Park ◽  
K. H. Seo
Keyword(s):  
Physical Properties ◽  
Crosslink Density ◽  
Failure Modes ◽  
Rubber Matrix ◽  
Adhesion Forces ◽  
Layered Model ◽  
Cure Characteristics ◽  
Filled Rubber ◽  
Ground Rubber ◽  
Rubber Compounds

Abstract There has been a great deal of research on the effects of ground rubber (GR) on the cure characteristics of GR-filled rubber compounds. It has been known that the cure systems of the rubber matrix and GR also had an effect on the cure characteristics and physical properties of GR-filled compounds. In this study, the variation of the crosslink density and crosslink types of recured vulcanizates and fresh vulcanizates, with respect to the cure systems, were investigated by using a three-layered model. In addition, the adhesion forces between recured vulcanizates and fresh vulcanizates were measured, and the fracture surfaces were examined. Depending on the cure systems, the changes in the crosslink density and crosslink types of recured and fresh vulcanizates varied significantly and the failure modes of adhesion specimens were also different.

Effect of Vulcanization Additive on Cure Characteristics and Physical Properties of Silica Filled Epoxidised Natural Rubber Truck Tyre Tread Compound

2015 ◽  
Vol 1107 ◽  
pp. 113-118
Author(s):  
Ahmad Kifli Che Aziz ◽  
Teku Zakwan Zaeimoedin ◽  
Mazlina Mustafa Kamal
Keyword(s):  
Carbon Black ◽  
Natural Rubber ◽  
Physical Properties ◽  
Abrasion Resistance ◽  
Butadiene Rubber ◽  
Cure Characteristics ◽  
Truck Tyre ◽  
Curing Systems

The challenges of using Epoxidised Natural Rubber (ENR) in truck tyre tread are to achieve good cure reversion resistant and physical properties especially on abrasion resistance towards long vulcanization time. The objectives of the project are to study the effects of vulcanization additive on cure characteristics and physical properties of silica filled ENR compound. In this work, a variation of curing systems were employed and a standard carbon black filled Natural Rubber/Butadiene Rubber (NR/BR) compound as a comparison. Greater reversion resistance and physical properties were observed with inclusion of vulcanization additive in the silica compound as compared to compound containing any. The abrasion resistance on the hand improved in spite of long vulcanisation time which commonly practices in truck tyre manufacturing.Keywords: ENR, silica, vulcanization additive, cure reversion, abrasion resistance

Characterization of Ground Rubber Tire and its Effect on Natural Rubber Compound

2000 ◽  
Vol 73 (5) ◽  
pp. 902-911 ◽  
Author(s):  
Amit K. Naskar ◽  
S. K. De ◽  
A. K. Bhowmick ◽  
P. K. Pramanik ◽  
R. Mukhopadhyay
Keyword(s):  
Natural Rubber ◽  
Physical Properties ◽  
Rubber Compound ◽  
Rubber Tire ◽  
Ground Rubber

Abstract Ground rubber tire (GRT) particles of different sizes were characterized and the effect of these particles in a natural rubber (NR) compound was studied. It is found that smaller particles contain less polymer, but have higher amounts of fillers and metals with respect to polymer. NR compound containing smaller GRT particles shows better physical properties, but poorer aging characteristics.

Oxidative Aging of Natural Rubber Vulcanizates. Part III. Crosslink Scission in Monosulfidic Networks

1969 ◽  
Vol 42 (3) ◽  
pp. 924-935 ◽  
Author(s):  
T. Colclough ◽  
J. I. Cunneen ◽  
G. M. C. Hrggins
Keyword(s):  
Natural Rubber ◽  
Physical Properties ◽  
Chemical Structure ◽  
Spectroscopic Methods ◽  
Chemical Probes ◽  
Conjugated Diene ◽  
Strain Measurements ◽  
Oxidative Aging ◽  
Tert Butyl Hydroperoxide ◽  
Natural Rubber Vulcanizates

Abstract A natural rubber vulcanizate containing almost entirely monosulfidic crosslinks was oxidized in oxygen and with tert-butyl hydroperoxide. The changes in physical properties due to oxidation were followed by stress—strain measurements, and the changes in chemical structure were investigated with chemical probes, and by spectroscopic methods. The results show that when the oxidized vulcanizates are heated at 75° C, the monosulfidic crosslinks are broken, that crosslinks containing two sulfur atoms are formed, and that conjugated diene and triene structures are introduced into the main polyisoprene chains.

Aromatic and Epoxidised Oil Curing and Rebound Resilience Characteristic and their Humidity Effect of Hardness on NR Vulcanizates

2013 ◽  
Vol 812 ◽  
pp. 138-144 ◽  
Author(s):  
Mohamed Rahmah ◽  
Wan Zain Norazira ◽  
Shafie Nur Ashyikin ◽  
Mohd Nurazzi Norizan
Keyword(s):  
Natural Rubber ◽  
Physical Properties ◽  
Room Temperature ◽  
Rubber Compound ◽  
Humidity Effect ◽  
Humidity Level ◽  
Cure Time ◽  
Humidity Chamber ◽  
Overall Performance ◽  
Natural Rubber Vulcanizates

Recently, aromatic oil (AO) is one of the substances that is typically used as a processing aid especially for high filler loadings in formulating rubber compound. Aromatic oil has disadvantages in that, it is hazardous to environment, toxic and has been labeled as carcinogenic. In this research, an epoxidised oil (EO) and aromatic oil were used to investigate the effect incorporation of oil onto the SBR/NR natural rubber vulcanizates (NR). From the result obtained, EO showed shorter cure time and scorch time as the oil loading were increased up to 20 pphr of EO. Physical properties such as hardness and rebound resilience of NR/EO vulcanisate were also investigated upon exposure to different humidity level in humidity chamber. At room temperature, the hardness of EO loading onto the SBR/NR vulcanisate is lower than AO loadings. Hardness was slightly decreased with increasing rate of humidity. There is great difference in hardness and rebound resilience values between AO and EO. Both hardness and rebound resilience were not affected by humidity. This implies the existence of good filler interaction with EO and rubber which do not impart changes in the hardness and resilience properties of rubber compound. Epoxidised oil has great promising potential to replace the carcinogenic aromatic oil as it has good overall performance and renewable in nature .

Reinforcing Effect of Silica and Silane Fillers on the Properties of Some Natural Rubber Vulcanizates

2003 ◽  
Vol 76 (5) ◽  
pp. 1290-1310 ◽  
Author(s):  
A. Ansarifar ◽  
R. Nijhawan ◽  
T. Nanapoolsin ◽  
M. Song
Keyword(s):  
Natural Rubber ◽  
Crosslink Density ◽  
Cyclic Fatigue ◽  
Rubber Matrix ◽  
Stored Energy ◽  
Elongation At Break ◽  
Reinforcing Effect ◽  
Bound Rubber ◽  
Technical Properties ◽  
Natural Rubber Vulcanizates

Abstract The reinforcing effect of up to 6 parts per hundred rubber by weight (phr) bis- (3-triethoxysilylpropyl) tetrasulfide (TESPT), a bifunctional organosilane, on the crosslink density, bound rubber, and technical properties of some conventional accelerator/sulfur compounds of natural rubber, containing 30 phr precipitated amorphous white silica was studied. The crosslink density and bound rubber improved as a function of TESPT loading. The tensile strength, elongation at break, stored energy density at rupture, and cohesive tear strength deteriorated at low loading of TESPT, but they subsequently increased after the full amount of TESPT was introduced into the compound. The improved properties of the vulcanizate was due to the better dispersion of the filler in the rubber matrix. However, the cyclic fatigue life was adversely affected, and the hardness hardly changed as a result of adding TESPT to the rubber.

Cure Characteristics and Physical Properties of Imperata cylindrica Activated Carbon Filled SMR L Compounding

2015 ◽  
Vol 815 ◽  
pp. 44-48
Author(s):  
M.H. Fatin ◽  
N.Z. Noriman ◽  
Kamarudin Husin ◽  
M.Z. Salihin ◽  
N.R. Munirah ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Natural Rubber ◽  
Physical Properties ◽  
Crosslink Density ◽  
Filler Loading ◽  
Rubber Compound ◽  
Maximum Torque ◽  
Cure Characteristics ◽  
Cure Time ◽  
Minimum Torque

The potential of activated carbon as a filler in rubber compound has been reviewed .Cure characteristics and physical properties ofImperataCylindricaactivated carbon filled natural rubber of Standard Malaysian Rubber (SMR L) were studied. SMR L was used as the elastomer and the composition of filler loading were varied from 0-50 parts per hundred rubber (phr). A semi-efficient vulcanization system was used throughout the study. The cure characteristics of the rubber compound was determined by using rheometer. The samples of hardness and resilience were measured by durometer shore A and Wallace Dunlop Tripsometer. Cure characteristics showed that cure time, t90and scorch time,t2increased as increased filler loading which indicate poor interaction between rubber and filler which slow down the vulcanization time. Minimum torque,MLand maximum torque,MHincreased as increased filler loading due to the low processability of the SMR L compounds. Crosslink density and hardness exhibit increment as increased filler loading due to increase rigidity of the SMR L compounds. The resilience will decrease correspondingly as increased in rigidity of the compounds.

Sign in / Sign up

Export Citation Format

Share Document