Ferrowax microvalves for fully automated serial dilution on centrifugal microfluidic platforms

2021 ◽  
pp. 2100131
Author(s):  
Soohyun Kim ◽  
Jayeon Song ◽  
RaKyeom Kim ◽  
Nae Yoon Lee ◽  
Min Hwan Kim ◽  
...  
2020 ◽  
Vol 27 ◽  
Author(s):  
Yi Zhang

: Point-of-care (POC) testing decentralizes the diagnostic tests to the sites near the patient. Many POC tests rely microfluidic platforms for sample-to-answer analysis. Compared to other microfluidic systems, magnetic digital microfluidics demonstrate compelling advantages for POC diagnostics. In this review, we have examined the capability of magnetic digital microfluidics-based POC diagnostic platforms. More importantly, we have categorized POC settings into three classes based on “where is the point”, “who to care” and “how to test”, and evaluated the suitability of magnetic digital microfluidics in various POC settings. Furthermore, we have addressed other technical issues associated with POC testing such as controlled environment, sample-system interface, system integration and information connectivity. We hope this review would provide a guideline for the future development of magnetic digital microfluidics-based platforms for POC testing.


2019 ◽  
Vol 137 ◽  
pp. 236-254 ◽  
Author(s):  
Nandini Dhiman ◽  
Peter Kingshott ◽  
Huseyin Sumer ◽  
Chandra S. Sharma ◽  
Subha Narayan Rath

Author(s):  
Daniel Vera ◽  
María García-Díaz ◽  
Núria Torras ◽  
Mar Álvarez ◽  
Rosa Villa ◽  
...  

Micromachines ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 223
Author(s):  
Mark D. Tarn ◽  
Sebastien N. F. Sikora ◽  
Grace C. E. Porter ◽  
Jung-uk Shim ◽  
Benjamin J. Murray

The homogeneous freezing of water is important in the formation of ice in clouds, but there remains a great deal of variability in the representation of the homogeneous freezing of water in the literature. The development of new instrumentation, such as droplet microfluidic platforms, may help to constrain our understanding of the kinetics of homogeneous freezing via the analysis of monodisperse, size-selected water droplets in temporally and spatially controlled environments. Here, we evaluate droplet freezing data obtained using the Lab-on-a-Chip Nucleation by Immersed Particle Instrument (LOC-NIPI), in which droplets are generated and frozen in continuous flow. This high-throughput method was used to analyse over 16,000 water droplets (86 μm diameter) across three experimental runs, generating data with high precision and reproducibility that has largely been unrepresented in the microfluidic literature. Using this data, a new LOC-NIPI parameterisation of the volume nucleation rate coefficient (JV(T)) was determined in the temperature region of −35.1 to −36.9 °C, covering a greater JV(T) compared to most other microfluidic techniques thanks to the number of droplets analysed. Comparison to recent theory suggests inconsistencies in the theoretical representation, further implying that microfluidics could be used to inform on changes to parameterisations. By applying classical nucleation theory (CNT) to our JV(T) data, we have gone a step further than other microfluidic homogeneous freezing examples by calculating the stacking-disordered ice–supercooled water interfacial energy, estimated to be 22.5 ± 0.7 mJ m−2, again finding inconsistencies when compared to theoretical predictions. Further, we briefly review and compile all available microfluidic homogeneous freezing data in the literature, finding that the LOC-NIPI and other microfluidically generated data compare well with commonly used non-microfluidic datasets, but have generally been obtained with greater ease and with higher numbers of monodisperse droplets.


Sensors ◽  
2021 ◽  
Vol 21 (10) ◽  
pp. 3420
Author(s):  
Marc Jofre ◽  
Lluís Jofre ◽  
Luis Jofre-Roca

The investigation of the electromagnetic properties of biological particles in microfluidic platforms may enable microwave wireless monitoring and interaction with the functional activity of microorganisms. Of high relevance are the action and membrane potentials as they are some of the most important parameters of living cells. In particular, the complex mechanisms of a cell’s action potential are comparable to the dynamics of bacterial membranes, and consequently focusing on the latter provides a simplified framework for advancing the current techniques and knowledge of general bacterial dynamics. In this work, we provide a theoretical analysis and experimental results on the microwave detection of microorganisms within a microfluidic-based platform for sensing the membrane potential of bacteria. The results further advance the state of microwave bacteria sensing and microfluidic control and their implications for measuring and interacting with cells and their membrane potentials, which is of great importance for developing new biotechnologically engineered systems and solutions.


Small ◽  
2019 ◽  
Vol 16 (9) ◽  
pp. 1903798 ◽  
Author(s):  
Qilong Zhao ◽  
Huanqing Cui ◽  
Yunlong Wang ◽  
Xuemin Du

2017 ◽  
Vol 9 (28) ◽  
pp. 4112-4134 ◽  
Author(s):  
David B. Go ◽  
Massood Z. Atashbar ◽  
Zeinab Ramshani ◽  
Hsueh-Chia Chang

Surface acoustic wave sensors and microfluidic platforms enable effective chemical detection and sample manipulation.


2002 ◽  
Vol 729 ◽  
Author(s):  
Siyi Lai ◽  
L. James Lee ◽  
Liyong Yu ◽  
Kurt W. Koelling ◽  
Marc J. Madou

AbstractIn this paper, we review the approaches developed in our laboratory for polymer-based micro/nanofabrication. For fabrication of microscale features, UV-LIGA (UV-lithography, electroplating, and molding) technology was applied for low-cost mass production. For fabrication of sub-micron or nanoscale features, a novel nano-manufacturing protocol is being developed. The protocol applies a novel nano-lithography imprinting process on an ultra-precision motion-control station. It is capable of economically producing well-defined pores or channels at the nanometer scale on thin polymer layers. The formed thin layers can be used as nano-filters for chemical or bio-separation. They can also be integrated into miniaturized devices for cell immunoprotection or tissue growth. For bonding of polymer-based microfluidic platforms, a novel resin-gas injection-assisted technique has been developed that achieves both bonding and surface modification. This new approach can easily seal microfluidic devices with micron and sub-micron sized channels without blocking the flow path. It can also be used to modify the channel shape, size, and surface characteristics (e.g., hydrophilicity, degree of protein adsorption). By applying the masking technique, local modification of the channel surface can be achieved through cascade resin-gas injection.


Sign in / Sign up

Export Citation Format

Share Document