scholarly journals Production and characterization of a new glycolipid, mannosylerythritol lipid, from waste cooking oil biotransformation by Pseudozyma aphidis ZJUDM34

2019 ◽  
Vol 7 (3) ◽  
pp. 937-948 ◽  
Author(s):  
Yongwu Niu ◽  
Jianan Wu ◽  
Wei Wang ◽  
Qihe Chen
Keyword(s):  
Waste Cooking Oil ◽  
Mannosylerythritol Lipid ◽  
Cooking Oil ◽  
Pseudozyma Aphidis

scholarly journals The Properties of Fuel and Characterization of Functional Groups in Biodiesel -Water Emulsions from Waste Cooking Oil and Its Blends

2020 ◽  
Vol 5 (1) ◽  
pp. 95-108
Author(s):  
Annisa Bhikuning ◽  
Jiro Senda Senda
Keyword(s):  
Fourier Transform ◽  
Alternative Fuels ◽  
Chemical Properties ◽  
Acid Methyl Ester ◽  
Waste Cooking Oil ◽  
Diesel Oil ◽  
Cooking Oil ◽  
Used Oil ◽  
Acid Methyl

Studying biodiesel as an alternative fuel is important for finding the most suitable fuel for the future. Biodiesel from waste cooking oil is one of the alternative fuels to replace fossil oil. Waste cooking oil is the used oil from cooking and is taken from hotels or restaurants. The emulsion of waste cooking oil and water is produced by adding water to the oil, as well as some additives to bind the water and the oil. In this study, the fuel properties of 100% biodiesel waste cooking oil  are compared to several blends by volume: 5% of biodiesel waste cooking oil blended with 95% diesel oil (BD5), 10% of biodiesel waste cooking oil blended with 90% of diesel oil (BD10), 5% of biodiesel waste cooking oil blended with 10% of water and 18.7% of additives (BDW18.7), and 5% of biodiesel waste cooking oil blended with 10% of water and 24.7% of additives (BDW24.7). The objectives of this study are to establish the properties and characteristics of the FTIR (Fourier-transform infrared spectroscopy) of biodiesel-water emulsions from waste cooking oil and to compare them to other fuels. The chemical properties of the fuels are analyzed by using the ASTM D Method and FTIR  to determine the FAME (fatty acid methyl ester) composition of biodiesel in diesel oil. The results showed that the addition of additives in the water-biodiesel oil increases the viscosity, density, and flash point. However, it decreased the caloric value due to the oxygen content in the fuel.

scholarly journals The Utilization of Waste Cooking Oil (WCO) as A Mixture of Polyol Sourcein. The Production of Polyurethane Using Toluene Diisocyanate

2019 ◽  
Vol 35 (1) ◽  
pp. 221-227
Author(s):  
Maulida Lubis ◽  
Mara Bangun Harahap ◽  
Iriany Iriany ◽  
Muhammad Hendra S. Ginting ◽  
Iqbal Navissyah Lazuardi ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Impact Strength ◽  
Waste Cooking Oil ◽  
Raw Material ◽  
Toluene Diisocyanate ◽  
Elongation At Break ◽  
Cooking Oil ◽  
A Value ◽  
Stirring Time

Cooking oil waste that has been disposed could contamine the environment. However, if it is processed well, it can potentially become a raw material of polyurethane. The aim of this study was to determine the best polyurethane on the tensile strength, impact strength, elongation at break, water absorption, characterization of Fourier Transform Infra-Red (FTIR) and the characterization of Scanning Electron Microscopy (SEM). The variables used in this study were ambient process temperature with 440 rpm stirring speed, 1-minute stirring time, the ratio of polyoland WCO was 7:3 (% w/w), and the ratio of Toluene Diisocyanate (TDI) and WCO was 1:1; 1:2; 1:3; 1:4 (% w/w). The results obtained from the analysis of the best tensile strength against the polyurethane synthetic was in the 1:1 ratio of mixed variations between oil and TDI with a value of 0.403 MPa. The best impact strength was in the ratio of mixed variations between oil and TDI with 1:4 (% w/w) with a value of 600.975 J/m2. The best elongation at break against polyurethane foam synthetic was in the 1:3 ratio of mixture variations of oil and TDI with a value of 4.506%.

scholarly journals Combustion characterization of waste cooking oil and canola oil based biodiesels under simulated engine conditions

Fuel ◽  
2018 ◽  
Vol 224 ◽  
pp. 167-177 ◽  
Author(s):  
C. Ming ◽  
I.M. Rizwanul Fattah ◽  
Qing N. Chan ◽  
Phuong X. Pham ◽  
Paul R. Medwell ◽  
...  
Keyword(s):  
Canola Oil ◽  
Waste Cooking Oil ◽  
Cooking Oil

scholarly journals Reusability test of Silica - Titania Catalyst on Biodiesel Production from Waste Cooking Oil in Various Temperatures

2019 ◽  
pp. 116-123
Author(s):  
Fiona Rachma Annisa ◽  
Indang Dewata ◽  
Hary Sanjaya ◽  
Latisma Dj ◽  
Ananda Putra ◽  
...  
Keyword(s):  
Flow Rate ◽  
Acid Value ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Tetrahedral Coordination ◽  
Cooking Oil ◽  
Used Cooking Oil ◽  
Ftir Characterization ◽  
Density Flow

This work has investigated the reusability of silica-titania in various temperatures (50 – 70°C) of biodiesel production from waste cooking oil. The reused silica-titania catalyst collected from silica-titania catalyst waste produced from the process of separating the catalyst from biodiesel products from palm oil and used cooking oil at various temperatures. The 1st and 2nd reused SiO2-TiO2 were characterized by DR UV-Vis and the spectra were deconvoluted for calculate the fraction of titanium in tetrahedral coordination. In addition the biodiesel products were characterized using FTIR, and several properties of biodiesel such as density, flow rate and acid value were analyzed in order to get the information about catalytic activity reused SiO2-TiO2. The results show the titanium tetrahedral fraction in reused catalyst (1st) and (2nd) are found to be 24,98% and 24.65%, respectively. The FTIR characterization of biodiesel products and waste cooking oil are almost similar. The analysis of waste cooking oil converted to biodiesel shows an optimum temperature of 50oC that at this temperature the lowest density or highest flow rate gave highest conversion of 47.82% using BCR1 and 39.13% using BCR2.

scholarly journals Synthesis and characterization of alkyl-methacrylate-maleic anhydride copolymer for use as a biodiesel flow improver

2021 ◽  
Vol 63 (3) ◽  
pp. 24-29
Author(s):  
Ngoc Lan Pham ◽  
◽  
Van Boi Luu ◽  
Thi Tuyet Mai Phan ◽  
Thi Son Nguyen ◽  
...  
Keyword(s):  
Maleic Anhydride ◽  
Pour Point ◽  
Alkyl Chain ◽  
Waste Cooking Oil ◽  
Polymer Additive ◽  
Alkyl Methacrylate ◽  
Cooking Oil ◽  
Maleic Anhydride Copolymer ◽  
Flow Improvement

Methacrylic acid was esterified with four alcohols: 1-decanol, 1-dodecanol, 1-tetradecanol, and 1-cetanol. Afterwards, the obtained monomers were copolymerized with maleic anhydride. The synthesized monomers and copolymers were characterized by 1H-NMR (Nuclear magnetic resonance) and Fourier transform infrared (FTIR) spectroscopy. The ability of the obtained copolymers to reduce the pour point of waste cooking oil-based biodiesel was investigated. The results showed that the polymer additive with the alkyl chain C14H29- demonstrated the best flow improvement performance. At a concentration of 1000 ppm, this polymer additive reduced the pour point of waste cooking oil-based biodiesel from 12 to 5oC.In this study,the effect of alkyl chain length, molecular weight, as well as the concentration of the additives on the pour point of biodiesel was also discussed.

Sign in / Sign up

Export Citation Format

Share Document