Self‐Healing Polyester Urethane Supramolecular Elastomers Reinforced with Cellulose Nanocrystals for Biomedical Applications

2019 ◽  
Vol 19 (10) ◽  
pp. 1900176 ◽  
Author(s):  
Ehsan Zeimaran ◽  
Sara Pourshahrestani ◽  
Nahrizul Adib Kadri ◽  
Daniel Kong ◽  
Seyed Farid Seyed Shirazi ◽  
...  
Keyword(s):  
Cellulose Nanocrystals ◽  
Biomedical Applications ◽  
Self Healing ◽  
Polyester Urethane

scholarly journals Influence of the SolubleInsoluble Ratios of Cyclodextrins Polymers on the Viscoelastic Properties of Injectable ChitosanBased Hydrogels for Biomedical Application

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 214 ◽  
Author(s):  
Carla Palomino-Durand ◽  
Marco Lopez ◽  
Frédéric Cazaux ◽  
Bernard Martel ◽  
Nicolas Blanchemain ◽  
...  
Keyword(s):  
Viscoelastic Properties ◽  
Biomedical Applications ◽  
Structural Integrity ◽  
Biomedical Application ◽  
Water Soluble ◽  
Self Healing ◽  
Indirect Contact ◽  
Polyelectrolyte Complexes ◽  
Anionic Polymers ◽  
The Difference

Injectable pre-formed physical hydrogels provide many advantages for biomedical applications. Polyelectrolyte complexes (PEC) formed between cationic chitosan (CHT) and anionic polymers of cyclodextrin (PCD) render a hydrogel of great interest. Given the difference between water-soluble (PCDs) and water-insoluble PCD (PCDi) in the extension of polymerization, the present study aims to explore their impact on the formation and properties of CHT/PCD hydrogel obtained from the variable ratios of PCDi and PCDs in the formulation. Hydrogels CHT/PCDi/PCDs at weight ratios of 3:0:3, 3:1.5:1.5, and 3:3:0 were elaborated in a double–syringe system. The chemical composition, microstructure, viscoelastic properties, injectability, and structural integrity of the hydrogels were investigated. The cytotoxicity of the hydrogel was also evaluated by indirect contact with pre-osteoblast cells. Despite having similar shear–thinning and self-healing behaviors, the three hydrogels showed a marked difference in their rheological characteristics, injectability, structural stability, etc., depending on their PCDi and PCDs contents. Among the three, all the best above-mentioned properties, in addition to a high cytocompatibility, were found in the hydrogel 3:1.5:1.5. For the first time, we gained a deeper understanding of the role of the PCDi/PCDs in the injectable pre-formed hydrogels (CHT/PCDi/PCDs), which could be further fine-tuned to enhance their performance in biomedical applications.

scholarly journals Three-Dimensional Stable Alginate-Nanocellulose Gels for Biomedical Applications: Towards Tunable Mechanical Properties and Cell Growing

Nanomaterials ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 78 ◽  
Author(s):  
Priscila Siqueira ◽  
Éder Siqueira ◽  
Ana Elza De Lima ◽  
Gilberto Siqueira ◽  
Ana Delia Pinzón-Garcia ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Tissue Engineering ◽  
Wound Healing ◽  
Cellulose Nanocrystals ◽  
Biomedical Applications ◽  
Cellulose Nanofibers ◽  
Oxidized Cellulose ◽  
Freeze Dried ◽  
Alginate Gels

Hydrogels have been studied as promising materials in different biomedical applications such as cell culture in tissue engineering or in wound healing. In this work, we synthesized different nanocellulose-alginate hydrogels containing cellulose nanocrystals, TEMPO-oxidized cellulose nanocrystals (CNCTs), cellulose nanofibers or TEMPO-oxidized cellulose nanofibers (CNFTs). The hydrogels were freeze-dried and named as gels. The nanocelluloses and the gels were characterized by different techniques such as Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and dynamic mechanical thermal analysis (DMTA), while the biological features were characterized by cytotoxicity and cell growth assays. The addition of CNCTs or CNFTs in alginate gels contributed to the formation of porous structure (diameter of pores in the range between 40 and 150 μm). TEMPO-oxidized cellulose nanofibers have proven to play a crucial role in improving the dimensional stability of the samples when compared to the pure alginate gels, mainly after a thermal post-treatment of these gels containing 50 wt % of CNFT, which significantly increased the Ca2+ crosslinking density in the gel structure. The morphological characteristics, the mechanical properties, and the non-cytotoxic behavior of the CNFT-alginate gels improved bioadhesion, growth, and proliferation of the cells onto the gels. Thus, the alginate-nanocellulose gels might find applications in tissue engineering field, as for instance, in tissue repair or wound healing applications.

Progress in self-healing hydrogels assembled by host–guest interactions: preparation and biomedical applications

2019 ◽  
Vol 7 (10) ◽  
pp. 1637-1651 ◽  
Author(s):  
Jiahong Jin ◽  
Lili Cai ◽  
Yong-Guang Jia ◽  
Sa Liu ◽  
Yunhua Chen ◽  
...  
Keyword(s):  
Biomedical Applications ◽  
Self Healing

Preparation and biomedical applications of self-healing hydrogels assembled from hosts of cyclodextrins and cucurbit[n]urils with various guests were reviewed.

scholarly journals Stem cell-laden hydrogel bioink for generation of high resolution and fidelity engineered tissues with complex geometries

2021 ◽  
Author(s):  
Oju Jeon ◽  
Yu Bin Lee ◽  
Sang Jin Lee ◽  
Nazilya Guliyeva ◽  
Joanna Lee ◽  
...  
Keyword(s):  
Stem Cell ◽  
High Resolution ◽  
Biomedical Applications ◽  
Human Mesenchymal Stem Cells ◽  
Complex Geometries ◽  
Complex Structures ◽  
Self Healing ◽  
3D Bioprinting ◽  
Healing Property

Recently, 3D bioprinting has been explored as a promising technology for biomedical applications with the potential to create complex structures with precise features. Cell encapsulated hydrogels composed of materials such as gelatin, collagen, hyaluronic acid, alginate and polyethylene glycol have been widely used as bioinks for 3D bioprinting. However, since most hydrogel-based bioinks may not allow rapid stabilization immediately after 3D bioprinting, achieving high resolution and fidelity to the intended architecture is a common challenge in 3D bioprinting of hydrogels. In this study, we have utilized shear-thinning and self-healing ionically crosslinked oxidized and methacrylated alginates (OMAs) as a bioink, which can be rapidly gelled by its self-healing property after bioprinting and further stabilized via secondary crosslinking. It was successfully demonstrated that stem cell-laden calcium-crosslinked OMA hydrogels can be bioprinted into complicated 3D tissue structures with both high resolution and fidelity. Additional photocrosslinking enables long-term culture of 3D bioprinted constructs for formation of functional tissue by differentiation of encapsulated human mesenchymal stem cells.

scholarly journals Self-Healing Hydrogels: Preparation, Mechanism and Advancement in Biomedical Applications

Polymers ◽  
2021 ◽  
Vol 13 (21) ◽  
pp. 3782
Author(s):  
Anupama Devi V. K. ◽  
Rohin Shyam ◽  
Arunkumar Palaniappan ◽  
Amit Kumar Jaiswal ◽  
Tae-Hwan Oh ◽  
...  
Keyword(s):  
Composite Materials ◽  
Biomedical Applications ◽  
Cell Encapsulation ◽  
Self Healing ◽  
3D Bioprinting ◽  
Engineering Systems ◽  
Future Perspectives ◽  
Non Covalent Interactions ◽  
Polymeric Hydrogels ◽  
Covalent Interactions

Polymeric hydrogels are widely explored materials for biomedical applications. However, they have inherent limitations like poor resistance to stimuli and low mechanical strength. This drawback of hydrogels gave rise to ‘’smart self-healing hydrogels’’ which autonomously repair themselves when ruptured or traumatized. It is superior in terms of durability and stability due to its capacity to reform its shape, injectability, and stretchability thereby regaining back the original mechanical property. This review focuses on various self-healing mechanisms (covalent and non-covalent interactions) of these hydrogels, methods used to evaluate their self-healing properties, and their applications in wound healing, drug delivery, cell encapsulation, and tissue engineering systems. Furthermore, composite materials are used to enhance the hydrogel’s mechanical properties. Hence, findings of research with various composite materials are briefly discussed in order to emphasize the healing capacity of such hydrogels. Additionally, various methods to evaluate the self-healing properties of hydrogels and their recent advancements towards 3D bioprinting are also reviewed. The review is concluded by proposing several pertinent challenges encountered at present as well as some prominent future perspectives.

scholarly journals Three-dimensional Hydrogels of Alginate/chitosan Semi-interpenetrating Polymer Networks and Nanocelluloses

2021 ◽  
Author(s):  
Priscila Siqueira ◽  
Ana de Lima ◽  
Felipe Medeiros ◽  
Augusta Isaac ◽  
Katia Novack ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Dimensional Stability ◽  
Cellulose Nanocrystals ◽  
Biomedical Applications ◽  
Cellulose Nanofibers ◽  
Polymer Networks ◽  
Three Dimensional ◽  
Controlled Drug Release ◽  
Interpenetrating Polymer Networks ◽  
Post Treatment

Abstract The hydrogels are advanced materials used in biomedical applications during wound healing, controlled drug release and to prepare scaffolds. In this work are prepared hydrogels of alginate/chitosan (Alg/Ch) semi-interpenetrating polymer networks (semi-IPN’s) and nanocelluloses. The hydrogels after preparation by freeze drying are namely simply as gels. The cellulose nanocrystals (CNC’s) are obtained from acid hydrolysis of bleached Eucalyptus pulps and oxidized cellulose nanocrystals (CNCT’s) prepared by (2,2,6,6-tetramethylpiperidin-1-yl)oxyl radical catalyzed reaction as known as TEMPO reaction. The cellulose nanofibers (NFC’s) are obtained from mechanical shearing of cellulose pulps and oxidized NFC’s by TEMPO-mediated reaction (NFCT’s). The nanocellulose suspension and gels are characterized by FTIR at ATR mode, TGA, XRD, TEM, SEM, X-ray computed microtomography (micro-CT) and DMTA. The addition of CNC’s, NFC’s, CNCT’s or NFCT’s in the microstructure of gels increases their dimensional stabilities. The best results are obtained when CNCT’s and NFCT’s are added. The mechanical properties and dimensional stability of Alg/Ch semi-IPN’s increase after controlled thermal post-treatment. The heating during thermal post-treatment boosts the physicochemical interactions in the microstructures of semi-IPN’s. The biological assays show biocompatibility of fibroblast cells on the substrates, and differentiation and proliferation up seven days. The optimized mechanical properties, dimensional stability and biocompatibility of the gels studied in this work are important parameters for potential biomedical applications of these biomaterials.

Sign in / Sign up

Export Citation Format

Share Document