Novel Nanocomposite PEM Membranes with Continuous Proton Transportation Channel and Reinforcing Network Formed by Electrospinning Solution Casting Method

2020 ◽  
Vol 305 (6) ◽  
pp. 1900388
Author(s):  
Wei Hu ◽  
Xue Yang ◽  
Xiaowei Hou ◽  
Qi Zhao ◽  
Baijun Liu ◽  
...  
Keyword(s):  
Solution Casting ◽  
Casting Method ◽  
Transportation Channel ◽  
Solution Casting Method

scholarly journals The Effect of Stereocomplex Polylactide Particles on the Stereocomplexation of High Molecular Weight Polylactide Blends

Polymers ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 2018
Author(s):  
Muhammad Samsuri ◽  
Ihsan Iswaldi ◽  
Purba Purnama
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
High Molecular Weight ◽  
Nucleating Agent ◽  
Solution Casting ◽  
Casting Method ◽  
Crystalline Fraction ◽  
Crystalline Structures ◽  
Solution Casting Method

Stereocomplexation is one of several approaches for improving polylactide (PLA) properties. The high molecular weight of poly L-lactide (PLLA) and poly D-lactide (PDLA) homopolymers are a constraint during the formation of stereocomplex PLAs (s-PLAs). The presence of s-PLA particles in PLA PLLA/PDLA blends can initiate the formation of s-PLA crystalline structures. We used the solution casting method to study the utilization of s-PLA materials from high molecular weight PLLA/PDLA blends for increasing s-PLA formation. The s-PLA particles initiated the formation of high molecular weight PLLA/PDLA blends, obtaining 49.13% s-PLA and 44.34% of the total crystalline fraction. In addition, the mechanical properties were enhanced through s-PLA crystalline formation and the increasing of total crystallinity of the PLLA/PDLA blends. The s-PLA particles supported initiation for s-PLA formation and acted as a nucleating agent for PLA homopolymers. These unique characteristics of s-PLA particles show potential to overcome the molecular weight limitation for stereocomplexation of PLLA/PDLA blends.

The Effect of Ammonium Bromide on Methylcellulose Biopolymer Electrolytes for Electrical Studies

2021 ◽  
Vol 317 ◽  
pp. 426-433
Author(s):  
Siti Nurhaziqah Abd Majid ◽  
Afiqah Qayyum Ishak ◽  
Nik Aziz Nik Ali ◽  
Muhamad Zalani Daud ◽  
Hasiah Salleh
Keyword(s):  
Fourier Transform ◽  
Ammonium Bromide ◽  
Solution Casting ◽  
X Ray Diffraction ◽  
Casting Method ◽  
X Ray ◽  
Electrical Studies ◽  
Biopolymer Electrolytes ◽  
Salt Complex ◽  
Solution Casting Method

The development of biopolymer electrolytes based on methylcellulose (MC) has been accomplished by incorporating ammonium bromide (NB) to the polymer-salt system. The biopolymer electrolytes were prepared via solution-casting method. The conductivity and permittivity characteristics of the material were studied. The biopolymer-salt complex formation have been analysed through Fourier Transform Infrared (FTIR) spectroscopy and X-ray diffraction (XRD). The conductivity of the sample was measured by EIS HIOKI. Upon addition of 20 wt.% of NB, highest conductivity of 3.25×10-4 μScm-1 was achieved at ambient temperature. The temperature dependence of the biopolymer electrolytes exhibit Arrhenius behaviour. This result had been further proven in FTIR study.

scholarly journals Preparation, Physicochemical Characterization, and Microrobotics Applications of Polyvinyl Chloride- (PVC-) Based PANI/PEDOT: PSS/ZrP Composite Cation-Exchange Membrane

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Mohd Imran Ahamed ◽  
Inamuddin ◽  
Abdullah M. Asiri ◽  
Mohammad Luqman ◽  
Lutfullah
Keyword(s):  
Physicochemical Characterization ◽  
Solution Casting ◽  
Polystyrene Sulfonate ◽  
X Ray Diffraction ◽  
Casting Method ◽  
X Ray ◽  
Solution Casting Method ◽  
Exchange Membrane ◽  
Differential Thermogravimetry ◽  
Aniline Polymerization

Poly(3,4-ethylene dioxythiophene): polystyrene sulfonate (PEDOT: PSS) zirconium(IV) phosphate (ZrP) based ionomeric membrane was prepared by a solution-casting method. Subsequently, aniline polymerization was carried out on the surface of the membrane by oxidative chemical polymerization. It was characterized by thermogravimetric analysis/differential thermal analysis/differential thermogravimetry (TGA/DTA/DTG), scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray (EDX) analysis, and Fourier-transform infrared (FTIR) spectroscopy. The membrane was also characterized by ion-exchange properties. The tip displacement investigation of the ionomeric membrane was also carried out. The outcomes demonstrated that the manufactured ionomeric membrane could produce generative strengths (tip powers), and consequently create good displacement. In this manner, the proposed ionomeric membrane was found proper for bending movement actuator that will give a successful and promising stage for smaller-scale mechanical applications.

scholarly journals Polyarylene ether nitrile and boron nitride composites: coating with sulfonated polyarylene ether nitrile

e-Polymers ◽  
2019 ◽  
Vol 19 (1) ◽  
pp. 70-78 ◽  
Author(s):  
Renbo Wei ◽  
Qian Xiao ◽  
Chenhao Zhan ◽  
Yong You ◽  
Xuefei Zhou ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Boron Nitride ◽  
Composite Films ◽  
Solution Casting ◽  
Casting Method ◽  
Polyarylene Ether Nitrile ◽  
Arylene Ether ◽  
Ultrasonic Technology ◽  
Solution Casting Method ◽  
Sulfonated Poly

AbstractBoron nitride (BN) coated with sulfonated poly-arylene ether nitrile (SPEN) (BN@SPEN) was used as additive to enhance the thermal conductivity of polyarylene ether nitrile. BN@SPEN was prepared by coating BN micro-platelets with SPEN through ultrasonic technology combined with the post-treatment bonding process. The prepared BN@SPEN was characterized by FTIR, TGA, SEM and TEM, which confirmed the successful coating of BN micro-platelets. The obtained BN@SPEN was introduced into the PEN matrix to prepare composite films by a solution casting method. The compatibility between BN and PEN matrix was studied by using SEM observation and rheology measurement. Furthermore, thermal conductivity of BN@SPEN/PEN films were carefully characterized. Thermal conductivity of BN@SPEN/PEN films was increased to 0.69 W/(m⋅K) at 20 wt% content of BN@SPEN, having 138% increment comparing with pure PEN.

scholarly journals Crystallization and Dielectric Properties of MWCNT /Poly(1-Butene) Composite Films by a Solution Casting Method

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 755
Author(s):  
Lingfei Li ◽  
Qiu Sun ◽  
Xiangqun Chen ◽  
Yongjun Xu ◽  
Zhaohua Jiang
Keyword(s):  
Dielectric Constant ◽  
Dielectric Properties ◽  
Dielectric Loss ◽  
Breakdown Strength ◽  
Composite Films ◽  
Conductive Filler ◽  
Interfacial Polarization ◽  
Solution Casting ◽  
Casting Method ◽  
Solution Casting Method

In this work, poly(1-butene) (PB-1) composite films with multi-walled carbon nanotubes (MWCNT) were prepared by a solution casting method. The relationship between the dielectric properties and the crystal transformation process of the films was investigated. It was indicated that there were two crystal forms of I and II of PB-1 during the solution crystallization process. With the prolongation of the phase transition time, form II was converted into form I. The addition of the conductive filler (MWCNT) accelerated the rate of phase transformation and changed the nucleation mode of PB-1. The presence of crystal form I in the system increased the breakdown strength and the dielectric constant of the films and reduced the dielectric loss, with better stability. In addition, the dielectric constant and the dielectric loss of the MWCNT/PB-1 composite films increased with the addition of MWCNT, due to the interfacial polarization between MWCNT and PB-1 matrix. When the mass fraction of the MWCNT was 1.0%, the composite film had a dielectric constant of 43.9 at 25 °C and 103 Hz, which was 20 times that of the original film.

Sign in / Sign up

Export Citation Format

Share Document