Kinetic Study of the Thermopolymerization of Furfuryl Methacrylate in Bulk by Mathematical Modeling. Part A: Simulation of Experimental Data and Sensitivity Analysis of Kinetic Parameters

2009 ◽  
Vol 18 (9) ◽  
pp. 511-527 ◽  
Author(s):  
Jurgen Lange ◽  
Natalia Davidenko ◽  
Roberto Sastre
Keyword(s):  
Mathematical Modeling ◽  
Experimental Data ◽  
Sensitivity Analysis ◽  
Kinetic Study ◽  
Kinetic Parameters

MATHEMATICAL MODELING OF IMMUNE-INFLAMMATORY REACTION IN ACUTE PNEUMONIA

1995 ◽  
Vol 03 (02) ◽  
pp. 429-439 ◽  
Author(s):  
S. G. RUDNEV ◽  
A. A. ROMANYUKHA
Keyword(s):  
Mathematical Modeling ◽  
Experimental Data ◽  
Mathematical Model ◽  
Immune Response ◽  
Sensitivity Analysis ◽  
Inflammatory Reaction ◽  
Humoral Immune ◽  
Disease Characteristics ◽  
Acute Pneumonia ◽  
Lung Resistance

Using ordinary differential equations, we propose a mathematical model describing an “averaged” dynamics of variables involved in which some parameters are shown to be important characteristics of lung resistance. The model consists of modified D.A. Lauffenburger’s mathematical model for inflammatory reaction in lungs, and the model of humoral immune response (G. I. Marchuk). Coefficients are identified against clinical and experimental data. We attempt to elucidate some disease characteristics in terms of sensitivity analysis of model solutions with respect to parameters variations.

A Biomass Combustion-Gasification Model: Validation and Sensitivity Analysis

1995 ◽  
Vol 117 (4) ◽  
pp. 329-336 ◽  
Author(s):  
N. Bettagli ◽  
U. Desideri ◽  
D. Fiaschi
Keyword(s):  
Experimental Data ◽  
Sensitivity Analysis ◽  
Kinetic Parameters ◽  
Chemical Kinetics ◽  
Operating Conditions ◽  
Waste Materials ◽  
Biomass Combustion ◽  
Gas Composition ◽  
Combustion Processes ◽  
Kinetics Of

The aim of the present paper is to study the gasification and combustion of biomass and waste materials. A model for the analysis of the chemical kinetics of gasification and combustion processes was developed with the main objective of calculating the gas composition at different operating conditions. The model was validated with experimental data for sawdust gasification. After having set the main kinetic parameters, the model was tested with other types of biomass, whose syngas composition is known. A sensitivity analysis was also performed to evaluate the influence of the main parameters, such as temperature, pressure, and air-fuel ratio on the composition of the exit gas. Both oxygen and air (i.e., a mixture of oxygen and nitrogen) gasification processes were simulated.

An homogeneous growth model of gallium arsenide epitaxial layers from the gas phase

1989 ◽  
Vol 54 (11) ◽  
pp. 2933-2950
Author(s):  
Emerich Erdös ◽  
Petr Voňka ◽  
Josef Stejskal ◽  
Přemysl Klíma
Keyword(s):  
Experimental Data ◽  
Gallium Arsenide ◽  
Kinetic Study ◽  
Gas Phase ◽  
Growth Model ◽  
Epitaxial Layers ◽  
Inhomogeneous Model ◽  
Homogeneous Models ◽  
Active Centres

This paper represents a continuation and ending of the kinetic study of the gallium arsenide formation, where a so-called inhomogeneous model is proposed and quantitatively formulated in five variants, in which two kinds of active centres appear. This model is compared both with the experimental data and with the previous sequence of homogeneous models.

scholarly journals Simulative investigation of ring creep on a planetary bearing of a wind turbine gearbox

2021 ◽  
Author(s):  
Jonas Gnauert ◽  
Felix Schlüter ◽  
Georg Jacobs ◽  
Dennis Bosse ◽  
Stefan Witter
Keyword(s):  
Experimental Data ◽  
Finite Element Method ◽  
Sensitivity Analysis ◽  
Planetary Gear ◽  
The Finite Element Method ◽  
Relative Movement ◽  
Wind Turbine Gearbox ◽  
Interference Fit ◽  
Planetary Gears ◽  
Module Coefficient

AbstractWind turbines (WT) must be further optimized concerning availability and reliability. One of the major reasons of WT downtime is the failure of gearbox bearings. Some of these failures occur, due to the ring creep phenomenon, which is mostly detected in the planetary bearings. The ring creep phenomenon describes a relative movement of the outer ring to the planetary gear. In order to improve the understanding of ring creep, the finite element method (FEM) is used to simulate ring creep in planetary gears. First, a sensitivity analysis is carried out on a small bearing size (NU205), to characterize relevant influence parameters for ring creep—considered parameters are teeth module, coefficient of friction, interference fit and normal tooth forces. Secondly, a full-scale planetary bearing (SL185030) of a 1MW WT is simulated and verified with experimental data.

Kinetic Study of Methanization Process Through Mathematical Modeling in Biochemical Methane Potential Assays from Four Different Inoculants

2021 ◽  
Vol 232 (10) ◽  
Author(s):  
Naassom Wagner Sales Morais ◽  
Milena Maciel Holanda Coelho ◽  
Maurício Guimarães de Oliveira ◽  
José Marcos Marques Mourão ◽  
Erlon Lopes Pereira ◽  
...  
Keyword(s):  
Mathematical Modeling ◽  
Kinetic Study ◽  
Biochemical Methane Potential ◽  
Methane Potential

Technological Features of the Liquid-Solid State of the Boundary Layer in the Processes of Bimetallic Products

2022 ◽  
Vol 1049 ◽  
pp. 53-61
Author(s):  
Valeriy Lykhoshva ◽  
Dmitry Glushkov ◽  
Elena Reintal ◽  
Valeriy V. Savin ◽  
Ludmila Alexeyevna Savina ◽  
...  
Keyword(s):  
Mathematical Modeling ◽  
Experimental Data ◽  
Boundary Layer ◽  
Solid State ◽  
Liquid Phase ◽  
Contact Zone ◽  
Thermal Field ◽  
Thermal State ◽  
Existence Time ◽  
Modeling Data

The hydrodynamic and thermal state in the contact zone of the layers of a bimetallic product obtained by pouring liquid iron onto a solid steel billet, which changes in time and is responsible for the strength of the diffusion joint and the geometric parameters of the transition layer, has been investigated. Simplified analytical dependences, mathematical modeling data and experimental results of the liquid phase existence time in the contact zone based on research of the melt velocities during pouring and changes in the thermal field are presented. It is shown that simplified calculations data coincide in order and are close in values ​​to the calculations of mathematical modeling and experimental data, which makes it possible to use them for preliminary rough estimates by technologists and metallurgists.

A Model for Otolith Dynamic Response with a Viscoelastic Gel Layer

1991 ◽  
Vol 1 (2) ◽  
pp. 139-151
Author(s):  
J.W. Grant ◽  
J.R. Cotton
Keyword(s):  
Mathematical Modeling ◽  
Experimental Data ◽  
Equations Of Motion ◽  
Otolith Organs ◽  
Major Contributor ◽  
Viscoelastic Solid ◽  
Gel Layer ◽  
Element System ◽  
Experimental Data Analysis ◽  
Finite Difference Techniques

The otolith organs were modeled mathematically as a 3-element system consisting of a viscous endolymph fluid in contact with a rigid otoconial layer that is attached to the skull by a gel layer. The gel layer was considered to be a viscoelastic solid, and was modeled as a simple Kelvin material. The governing differential equations of motion were derived and nondimensionalized, yielding 3 nondimensional parameters: nondimensional density, nondimensional viscosity, and nondimensional elasticity. The equations were solved using finite difference techniques on a digital computer. By comparing the model’s response with previous experimental research, values for the nondimensional parameters were found. The results indicate that the inclusion of viscous and elastic effects in the gel layer are necessary for the model to produce otoconial layer deflections that are consistent with physiologic displacements. Future experimental data analysis and mathematical modeling effects should include viscoelastic gel layer effects, as this is a major contributor to system damping and response.

Sign in / Sign up

Export Citation Format

Share Document