Numerical and experimental investigations on the low‐velocity impact properties of hybrid Kevlar fiber/basalt fiber reinforced epoxy composites: Effects of impactor nose shape and fiber stacking sequences

2021 ◽  
Author(s):  
Mohammad Reza Karamooz ◽  
Hossein Rahmani ◽  
Hamed Khosravi
Keyword(s):  
Basalt Fiber ◽  
Epoxy Composites ◽  
Low Velocity Impact ◽  
Experimental Investigations ◽  
Fiber Reinforced ◽  
Low Velocity ◽  
Impact Properties ◽  
Velocity Impact ◽  
Kevlar Fiber ◽  
Nose Shape

Optimization of Low-Velocity Impact Properties of E-Glass/Epoxy Composites Using Plasticizing Modifiers

2012 ◽  
Author(s):  
M. M. Rahman ◽  
N. Jahan ◽  
S. Zainuddin ◽  
M. V. Hosur ◽  
S. Jeelani ◽  
...  
Keyword(s):  
Epoxy Resin ◽  
Energy Absorption ◽  
Epoxy Composites ◽  
Low Velocity Impact ◽  
Resin System ◽  
Low Velocity ◽  
Flexure Strength ◽  
Impact Properties ◽  
Velocity Impact ◽  
Epoxy Resin System

The prime aim of this work is to enhance the energy absorbing capabilities of e-glass/epoxy composite under low velocity impact using plasticizing modifiers. Epoxy terminated polyol at 5–15 phr loading levels as plasticizing modifier was mixed into two-phase SC-15 epoxy resin system by a high speed mechanical stirrer. Modified epoxy resin system was then used to fabricate E-glass/epoxy composites by hot press processing. Low velocity impact test at two different energy levels was carried out to investigate the effectiveness of incorporating plasticizing modifier on impact properties of these composites. In addition, three point bend test was also conducted to examine the effects on flexure properties with plasticizing modifiers. Incorporation of epoxy terminated polyol in E-glass/epoxy laminates proved efficient with a significant improvement of 23% in impact energy absorption capability over control counterpart. On the other hand, flexure strength and modulus has been decreased upon polyol loading whereas failure strain has been increased. The flexible polymer chain of polyol group inserted between epoxy molecules by chemical reaction enhances the ductility of the composites and reduces the number of cross-linking. Hence, energy absorption capability or overall toughness was found to increase with a slight reduction of peak strength and flexure strength and stiffness.

Recovery and improvement in low-velocity impact properties of e-glass/epoxy composites through novel self-healing technique

2014 ◽  
Vol 108 ◽  
pp. 277-286 ◽  
Author(s):  
S. Zainuddin ◽  
T. Arefin ◽  
A. Fahim ◽  
M.V. Hosur ◽  
J.D. Tyson ◽  
...  
Keyword(s):  
Epoxy Composites ◽  
Low Velocity Impact ◽  
Self Healing ◽  
Low Velocity ◽  
Impact Properties ◽  
Velocity Impact

Investigation of nano-hybridization effects on low velocity impact behaviors of basalt fiber reinforced composites

2020 ◽  
pp. 002199832094964
Author(s):  
İbrahim Demirci ◽  
Ahmet Avcı ◽  
Mehmet Turan Demirci
Keyword(s):  
Tensile Strength ◽  
Epoxy Composites ◽  
Low Velocity Impact ◽  
Maximum Force ◽  
Fracture Mechanisms ◽  
Fiber Reinforced ◽  
Epoxy Nanocomposites ◽  
Low Velocity ◽  
Velocity Impact ◽  
The Impact

In general the nanoparticles increase the mechanical and impact behaviors of fiber reinforced polymer based composites. However, the effects of the hybridization of nanoparticles and their reasons over the nano scale fracture mechanisms have not been adequately studied for fiber reinforced composites. In this study, the low velocity impact responses and the mechanical behaviors were investigated for 4%wt. SiO2 nanoparticles filled BFR/Epoxy nanocomposites, 0.5%wt. MWCNTs filled BFR/Epoxy nanocomposites, 4%wt. SiO2 nanoparticles and 0.5%wt. MWCNTs nano-hybrid filled BFR/Epoxy nanocomposites and unfilled BFR/Epoxy composites. The tensile and low velocity impact tests at 10 J and 20 J of energy levels were applied to nanoparticles, nano-hybrid and unfilled BFR/Epoxy composites in order to define the effects of nanoparticles and nano-hybrid particles on the impact and mechanical features according to in accordance with ASTM D3039/D3039M-14 and ASTM D7136/7136M standards. It was observed that SiO2 nanoparticles addition to BFR/Epoxy for both 10 J and 20 J showed the highest tensile strength, maximum force, rebound energy and the lowest displacements and absorbed energy. SiO2+MWCNTs nano-hybrid addition to BFR/Epoxy improved higher low velocity impact responses and tensile strength than MWCNTs addition. The specimens of unfilled BFR/Epoxy composites showed the lowest tensile strength and maximum force and the highest maximum force, displacements and absorbed energy. Microscope and SEM analyses demonstrated that minimum failures like fiber breakages, delamination and debonding were observed by filling SiO2 nanoparticles provided the nano scale fracture mechanisms. In addition MWCNTs hybridization with SiO2 nanoparticles minimizes negative effects of MWCNTs micro size length and improved the impact and mechanical behaviors.

Low velocity impact and fracture characterization of SiO2 nanoparticles filled basalt fiber reinforced composite tubes

2020 ◽  
Vol 54 (23) ◽  
pp. 3415-3433 ◽  
Author(s):  
Mehmet Turan Demirci
Keyword(s):  
Fracture Toughness ◽  
Basalt Fiber ◽  
Low Velocity Impact ◽  
Fracture Mechanisms ◽  
Fiber Reinforced ◽  
Low Velocity ◽  
Composite Tubes ◽  
Velocity Impact ◽  
Impact Tests ◽  
The Impact

Nano-microscale fracture mechanisms, which affect fracture toughness, play an important role in improving the impact characterization of fiber reinforced polymer composites. Therefore, crack behaviors are tried to be controlled with fracture mechanisms by filling nanoparticles into polymer matrix for improving impact characteristics and fracture toughness in latest studies. In this study, it was aimed to investigate the effects of SiO2 nanoparticles addition into epoxy matrix on the low velocity impact characteristics and fracture toughness in basalt fiber reinforced filament wound composite tubes. SiO2 nanoparticle of 4% wt. filled and unfilled ± [55]6 filament wound basalt fiber reinforced/epoxy composite tubes were subjected to low velocity impact tests at 5 J, 10 J, and 15 J of energy levels. It was seen that while the addition of nanoparticles were increasing the maximum impact forces in the range of about 19%–32%, displacements and absorbed energies decreased because of the increase in the bending stiffness. Charpy impact tests were performed to three different notched arc shaped specimens for determining the impact fracture toughness. SiO2 nanoparticles increased the fracture toughness by 20%–23%. It was observed that SiO2 nanoparticles delayed the formation of failures such as debonding and delamination, and reduced the fiber breakage branching in low velocity impact tests. A liquid penetrant test was used to inspect the crack formations and progressions on the impacted surfaces of all composite tubes as practical inspection for industrial applications. It was seen that microscope and SEM analysis supported the liquid penetrant inspection, which is a non-destructive testing method.

Advanced 3D and 2D damage assessment of low velocity impact response of glass and Kevlar fiber reinforced epoxy hybrid composites

2018 ◽  
Vol 4 (3) ◽  
pp. 493-510 ◽  
Author(s):  
A. Vasudevan ◽  
S. Senthil Kumaran ◽  
K. Naresh ◽  
R. Velmurugan ◽  
K. Shankar
Keyword(s):  
Damage Assessment ◽  
Hybrid Composites ◽  
Impact Response ◽  
Low Velocity Impact ◽  
Fiber Reinforced ◽  
Low Velocity ◽  
Velocity Impact ◽  
Kevlar Fiber
Sign in / Sign up

Export Citation Format

Share Document