Construction of GQDs‐Decorated Ultrathin Bi 2 WO 6 Nanosheets Hydrogel: a Recyclable‐Flexible Platform with Excellent Piezo‐Photocatalytic Activity for High‐Performance Water Decontamination and its Theoretical Interpretation

Author(s):  
Ziye Wei ◽  
Hongzhi Gao ◽  
Guoshuai Fu ◽  
Guowei Yang ◽  
Jiling Li ◽  
...  
1992 ◽  
Vol 57 (1) ◽  
pp. 33-45
Author(s):  
Vladimír Jakuš

A new approach to theoretical evaluation of the Gibbs free energy of solvation was applied for estimation of retention data in high-performance liquid chromatography on reversed phases (RP-HPLC). Simple and improved models of stationary and mobile phases in RP-HPLC were employed. Statistically significant correlations between the calculated and experimental data were obtained for a heterogeneous series of twelve compounds.


Catalysts ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 589
Author(s):  
Sivagowri Shanmugaratnam ◽  
Balaranjan Selvaratnam ◽  
Aravind Baride ◽  
Ranjit Koodali ◽  
Punniamoorthy Ravirajan ◽  
...  

Earth–abundant transition metal chalcogenide materials are of great research interest for energy production and environmental remediation, as they exhibit better photocatalytic activity due to their suitable electronic and optical properties. This study focuses on the photocatalytic activity of flower-like SnS2 nanoparticles (composed of nanosheet subunits) embedded in TiO2 synthesized by a facile hydrothermal method. The materials were characterized using different techniques, and their photocatalytic activity was assessed for hydrogen evolution reaction and the degradation of methylene blue. Among the catalysts studied, 10 wt. % of SnS2 loaded TiO2 nanocomposite shows an optimum hydrogen evolution rate of 195.55 µmolg−1, whereas 15 wt. % loading of SnS2 on TiO2 exhibits better performance against the degradation of methylene blue (MB) with the rate constant of 4.415 × 10−4 s−1 under solar simulated irradiation. The improved performance of these materials can be attributed to the effective photo-induced charge transfer and reduced recombination, which make these nanocomposite materials promising candidates for the development of high-performance next-generation photocatalyst materials. Further, scavenging experiments were carried out to confirm the reactive oxygen species (ROS) involved in the photocatalytic degradation. It can be observed that there was a 78% reduction in the rate of degradation when IPA was used as the scavenger, whereas around 95% reduction was attained while N2 was used as the scavenger. Notably, very low degradation (<5%) was attained when the dye alone was directly under solar irradiation. These results further validate that the •OH radical and the superoxide radicals can be acknowledged for the degradation mechanism of MB, and the enhancement of degradation efficiency may be due to the combined effect of in situ dye sensitization during the catalysis and the impregnation of low bandgap materials on TiO2.


RSC Advances ◽  
2021 ◽  
Vol 11 (17) ◽  
pp. 10300-10308
Author(s):  
Hui Feng ◽  
Siqi Feng ◽  
Niu Tang ◽  
Songbai Zhang ◽  
Xiangyang Zhang ◽  
...  

New idea for the low cost synthesis of high performance photocatalysts for the photodegradation of organic pollutants in aqueous solution.


2014 ◽  
Vol 70 (2) ◽  
Author(s):  
Mohamad Azuwa Mohamed ◽  
Wan Norharyati Wan Salleh ◽  
Juhana Jaafar ◽  
Norhaniza Yusof

The evolution of desirable physico-chemical properties in high performance photocatalyst materials involves steps that must be carefully designed, controlled, and optimized. This study investigated the role of key parameter in the preparation and photocatalytic activity analysis of the mixed phase of anatase/rutile TiO2 nanoparticles, prepared via sol-gel method containing titanium-n-butoxide Ti(OBu)4 as a precursor material, nitric acid as catalyst, and isopropanol as solvent. The prepared TiO2 nanoparticles were characterized by means of XRD, SEM, and BET analyses, and UV-Vis-NIR spectroscopy. The results indicated that the calcination temperature play an important role in the physico-chemical properties and photocatalytic activity of the resulting TiO2 nanoparticles. Different calcination temperatures would result in different composition of anatase and rutile. The photocatalytic activity of the prepared mixed phase of anatase/rutile TiO2 nanoparticles was measured by photodegradation of 50 ppm phenol in an aqueous solution. The commercial anatase from Sigma-Aldrich and Degussa P25 were used for comparison purpose. The mixed phase of anatase/rutile TiO2 nanoparticles (consists of 38.3% anatase and 61.7% rutile) that was prepared at 400°C exhibited the highest photocatalytic activity of 84.88% degradation of phenol. The result was comparable with photocatalytic activity demonstrated by Degussa P25 by 1.54% difference in phenol degradation. The results also suggested that the mixed phase of anatase/rutile TiO2 nanoparticles is a promising candidate for the phenol degradation process. The high performance of photocatalyst materials may be obtained by adopting a judicious combination of anatase/rutile and optimized calcination conditions.


NANO ◽  
2016 ◽  
Vol 11 (05) ◽  
pp. 1650054 ◽  
Author(s):  
Bin Zeng ◽  
Yang Yin

CuS hexagonal nanosheet/graphene was fabricated by a facile one-pot microwave-thermal method. The samples possess excellent photocatalytic activity for degradation of organic pollutant under visible light. The high photocatalytic activity was attributed to the deposition of CuS hexagonal nanosheet onto graphene. CuS nanosheet serves as a transporter which efficiently inhibits the recombination of the photo-induced charge carriers in the nanocomposites. The developed method demonstrates a facile approach towards the synthesis of two-dimensional semiconductor-graphene nanocomposites with excellent photocatalytic performance under visible light.


2021 ◽  
Vol 21 (4) ◽  
pp. 2647-2652
Author(s):  
Yanchen Ji ◽  
Guoxin Song ◽  
Ruiqi Yang ◽  
Longhua Ding ◽  
Aizhu Wang ◽  
...  

In this work, CeO2 nanocrystal-decorated TiO2 nanobelt for forming a CeO2@TiO2 heterostructure. CeO2 plays a dual role in improving photocatalytic activity, not only by promoting the separation and transfer of photogenerated charge carriers, but also by increasing visible light absorption of the photocatalyst as a photosensitizer. The as-prepared CeO2@TiO2 heterostructure demonstrates the performance of organic degradation and H2 production (about 17 μmol/h/g, which is about 2.5 times higher than that of pure TiO2 nanobelts). Our work provides a facile and controllable synthesis method for high performance photocatalyst, which will have potential applications in synthesis clean/solar fuel, and photocatalytic water treatment.


2020 ◽  
Vol 10 (4) ◽  
pp. 537-542
Author(s):  
Fei Tian ◽  
Gen Zhu ◽  
Kexin Shen ◽  
Chunju Li ◽  
Haitao Li ◽  
...  

Organic pollutants pose a serious threat to human health, and so their control by photocatalytic techniques has become an important field. There is an urgent need to devise convenient syntheses of effective photocatalysts for the degradation of contaminants. Here, high-performance anatase TiO2 nanowires have been obtained through a hydrothermal method followed by calcination at different temperatures in Ar. The products have been characterized by SEM, XRD, FTIR, and UV/Vis DRS measurements. The photocatalytic performances of the as-prepared catalysts in the degradation of rhodamine 6G (R6G) have been evaluated. The experimental results revealed that as-prepared TiO2 nanowires calcined at 600 °C (TNWs-600) exhibited the highest degree of R6G degradation (96%) under simulated solar irradiation. This could be attributed to their stable anatase phase with good photocatalytic activity, the excellent light absorption ability of which favors excitation. Overall, the fabricated TNWs-600 constitute a promising candidate material for photocatalytic applications in the removal of environmental pollutants.


Sign in / Sign up

Export Citation Format

Share Document