scholarly journals Fracture analysis of concrete using scanning electron microscopy

Scanning ◽  
2006 ◽  
Vol 19 (6) ◽  
pp. 426-430 ◽  
Author(s):  
Kamran M. Nemati
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fracture Analysis ◽  
Scanning Electron

Research on the Effect of Holding Time on Diamond Drill Bit Performance

2013 ◽  
Vol 634-638 ◽  
pp. 2411-2418
Author(s):  
Ru Yin Song ◽  
Hong Wu Yang ◽  
Jun De Yang
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Hot Pressing ◽  
Sintering Temperature ◽  
Fracture Analysis ◽  
Holding Time ◽  
Drill Bit ◽  
Diamond Drill ◽  
Scanning Electron

The sintering parameters of hot-pressing diamond drill bit mainly contains the sintering temperature, holding time, sintering pressure and the pressurized method. The length of holding time is directly related to the performance of diamond drill bit. This article mainly discusses the effect of holding time on the performance of diamond drill bit. First, a general formula of diamond drill bit is chosen. A group of samples in this parameter were loaded and sintered. Holding time is set as variable, while other parameters remain the same. The optimal holding time for this formula is obtained through the mechanical properties tests on the samples’ bending, tension, compression, and hardness, and fracture analysis using scanning electron microscopy (SEM).

scholarly journals Fracture analysis of the circulating pump bolts

2020 ◽  
Vol 213 ◽  
pp. 02017
Author(s):  
Chengjun Jiang ◽  
Wei Wang ◽  
Xiaohui Zou ◽  
Jifeng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Power Plant ◽  
Stress Corrosion ◽  
Optical Microscopy ◽  
Electron Probe Microanalysis ◽  
Electron Probe ◽  
Fracture Analysis ◽  
Chloride Ions ◽  
Scanning Electron

The microstructure, micrograph of the fracture sections and the alloy elements distribution of the fractured flange-connecting bolts of 3# circulating pump in a power plant were analyzed by the scanning electron microscopy, the optical microscopy and the electron probe microanalysis. The results showed that the failed bolts’ material is not the design material, and failure of the bolts is due to the stress corrosion crack propagation of the bolts’ austenitic material by chloride ions in seawater.

Fracture Analysis of Pneumatic Control Valve Rod Used for Nuclear Power Plants

2014 ◽  
Vol 1004-1005 ◽  
pp. 1359-1364
Author(s):  
Lei Yang ◽  
Yan Li ◽  
Lu Zhang ◽  
Yun Ting Lai ◽  
Zhi Feng Luo ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Impact Test ◽  
Control Valve ◽  
Fracture Analysis ◽  
Pneumatic Control ◽  
Scanning Electron

The fracture of a carbon steel pneumatic control valve rod used for Nuclear Power Plants was analyzed in terms of the microstructure, inclusions and fractogragh by means of tensile test, charpy V-Notch impact test, optical microscopy, scanning electron microscopy and energy dispersive spectroscopy. The results indicated that the fracture of the rod is induced by the unqualified chemical composition: a large number of inclusions which distribute in grain boundaries reduce the material plasticity and toughness, and eventually cause fracture.

Pathogenesis of Human Hair Defects

1974 ◽  
Vol 32 ◽  
pp. 12-13
Author(s):  
P.S. Porter ◽  
T. Aoyagi ◽  
R. Matta
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Human Hair ◽  
Standard Techniques ◽  
Scanning Electron

Using standard techniques of scanning electron microscopy (SEM), over 1000 human hair defects have been studied. In several of the defects, the pathogenesis of the abnormality has been clarified using these techniques. It is the purpose of this paper to present several distinct morphologic abnormalities of hair and to discuss their pathogenesis as elucidated through techniques of scanning electron microscopy.

Ultrastructural Analysis of the Salivary Glands of Gromphadorhina Portentosa (Schaum)

1977 ◽  
Vol 35 ◽  
pp. 638-639
Author(s):  
P.J. Dailey
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Salivary Glands ◽  
Secretory Vesicles ◽  
The Past ◽  
Transmission Electron ◽  
Means Of Transmission ◽  
Gromphadorhina Portentosa ◽  
Scanning Electron ◽  
Topographical Relief

The structure of insect salivary glands has been extensively investigated during the past decade; however, none have attempted scanning electron microscopy (SEM) in ultrastructural examinations of these secretory organs. This study correlates fine structure by means of SEM cryofractography with that of thin-sectioned epoxy embedded material observed by means of transmission electron microscopy (TEM).Salivary glands of Gromphadorhina portentosa were excised and immediately submerged in cold (4°C) paraformaldehyde-glutaraldehyde fixative1 for 2 hr, washed and post-fixed in 1 per cent 0s04 in phosphosphate buffer (4°C for 2 hr). After ethanolic dehydration half of the samples were embedded in Epon 812 for TEM and half cryofractured and subsequently critical point dried for SEM. Dried specimens were mounted on aluminum stubs and coated with approximately 150 Å of gold in a cold sputtering apparatus.Figure 1 shows a cryofractured plane through a salivary acinus revealing topographical relief of secretory vesicles.

Two- or three-way observations of the identical cell elements within the same sections by LM, TEM and/or SEM

1978 ◽  
Vol 36 (2) ◽  
pp. 82-83 ◽  
Author(s):  
Nakazo Watari ◽  
Yasuaki Hotta ◽  
Yoshio Mabuchi
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Fine Structure ◽  
Light Microscopy ◽  
Thin Sections ◽  
Transmission Electron ◽  
Identical Cell ◽  
Electron Microscopes ◽  
Scanning Electron

It is very useful if we can observe the identical cell elements within the same sections by light microscopy (LM), transmission electron microscopy (TEM) and/or scanning electron microscopy (SEM) sequentially, because, the cell fine structure can not be indicated by LM, while the color is; on the other hand, the cell fine structure can be very easily observed by EM, although its color properties may not. However, there is one problem in that LM requires thick sections of over 1 μm, while EM needs very thin sections of under 100 nm. Recently, we have developed a new method to observe the same cell elements within the same plastic sections using both light and transmission (conventional or high-voltage) electron microscopes.In this paper, we have developed two new observation methods for the identical cell elements within the same sections, both plastic-embedded and paraffin-embedded, using light microscopy, transmission electron microscopy and/or scanning electron microscopy (Fig. 1).

Spontaneous Cataract in Nude Athymic Mice

1977 ◽  
Vol 35 ◽  
pp. 512-513
Author(s):  
Ronald H. Bradley ◽  
R. S. Berk ◽  
L. D. Hazlett
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Nude Mouse ◽  
Cellular Immunity ◽  
Phosphate Buffer ◽  
Osmium Tetroxide ◽  
Athymic Mice ◽  
Transmission Microscopy ◽  
Mouse Lens ◽  
Scanning Electron

The nude mouse is a hairless mutant (homozygous for the mutation nude, nu/nu), which is born lacking a thymus and possesses a severe defect in cellular immunity. Spontaneous unilateral cataractous lesions were noted (during ocular examination using a stereomicroscope at 40X) in 14 of a series of 60 animals (20%). This transmission and scanning microscopic study characterizes the morphology of this cataract and contrasts these data with normal nude mouse lens.All animals were sacrificed by an ether overdose. Eyes were enucleated and immersed in a mixed fixative (1% osmium tetroxide and 6% glutaraldehyde in Sorenson's phosphate buffer pH 7.4 at 0-4°C) for 3 hours, dehydrated in graded ethanols and embedded in Epon-Araldite for transmission microscopy. Specimens for scanning electron microscopy were fixed similarly, dehydrated in graded ethanols, then to graded changes of Freon 113 and ethanol to 100% Freon 113 and critically point dried in a Bomar critical point dryer using Freon 13 as the transition fluid.

Scanning and Transmission Microscopy of Nematocyst Batteries in Epitheliomuscular Cells of Hydra

1971 ◽  
Vol 29 ◽  
pp. 410-411 ◽  
Author(s):  
Jane A. Westfall ◽  
S. Yamataka ◽  
Paul D. Enos
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Osmium Tetroxide ◽  
External Surface ◽  
Three Dimensional ◽  
Surface Structures ◽  
Transmission Microscopy ◽  
Transmission Electron ◽  
Freeze Dried ◽  
Scanning Electron

Scanning electron microscopy (SEM) provides three dimensional details of external surface structures and supplements ultrastructural information provided by transmission electron microscopy (TEM). Animals composed of watery jellylike tissues such as hydras and other coelenterates have not been considered suitable for SEM studies because of the difficulty in preserving such organisms in a normal state. This study demonstrates 1) the successful use of SEM on such tissue, and 2) the unique arrangement of batteries of nematocysts within large epitheliomuscular cells on tentacles of Hydra littoralis.Whole specimens of Hydra were prepared for SEM (Figs. 1 and 2) by the fix, freeze-dry, coat technique of Small and Màrszalek. The specimens were fixed in osmium tetroxide and mercuric chloride, freeze-dried in vacuo on a prechilled 1 Kg brass block, and coated with gold-palladium. Tissues for TEM (Figs. 3 and 4) were fixed in glutaraldehyde followed by osmium tetroxide. Scanning micrographs were taken on a Cambridge Stereoscan Mark II A microscope at 10 KV and transmission micrographs were taken on an RCA EMU 3G microscope (Fig. 3) or on a Hitachi HU 11B microscope (Fig. 4).

Microbulldozing and Microchiseling

1969 ◽  
Vol 27 ◽  
pp. 134-135
Author(s):  
J.N. Ramsey ◽  
D.P. Cameron ◽  
F.W. Schneider
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Material Handling ◽  
Microprobe Analysis ◽  
Foreign Matter ◽  
Specific Location ◽  
Potential Problems ◽  
Knoop Indenter ◽  
Scanning Electron ◽  
Microhardness Tester

As computer components become smaller the analytical methods used to examine them and the material handling techniques must become more sensitive, and more sophisticated. We have used microbulldozing and microchiseling in conjunction with scanning electron microscopy, replica electron microscopy, and microprobe analysis for studying actual and potential problems with developmental and pilot line devices. Foreign matter, corrosion, etc, in specific locations are mechanically loosened from their substrates and removed by “extraction replication,” and examined in the appropriate instrument. The mechanical loosening is done in a controlled manner by using a microhardness tester—we use the attachment designed for our Reichert metallograph. The working tool is a pyramid shaped diamond (a Knoop indenter) which can be pushed into the specimen with a controlled pressure and in a specific location.

A New Image Processing Technique for STEM

1974 ◽  
Vol 32 ◽  
pp. 432-433
Author(s):  
Yasushi Kokubo ◽  
Hirotami Koike ◽  
Teruo Someya
Keyword(s):  
Electron Microscopy ◽  
Image Processing ◽  
Scanning Electron Microscopy ◽  
Elastic Scattering ◽  
Field Emission ◽  
Processing Technique ◽  
Image Processing Technique ◽  
Energy Analyzer ◽  
Scanning Microscope ◽  
Scanning Electron

One of the advantages of scanning electron microscopy is the capability for processing the image contrast, i.e., the image processing technique. Crewe et al were the first to apply this technique to a field emission scanning microscope and show images of individual atoms. They obtained a contrast which depended exclusively on the atomic numbers of specimen elements (Zcontrast), by displaying the images treated with the intensity ratio of elastically scattered to inelastically scattered electrons. The elastic scattering electrons were extracted by a solid detector and inelastic scattering electrons by an energy analyzer. We noted, however, that there is a possibility of the same contrast being obtained only by using an annular-type solid detector consisting of multiple concentric detector elements.

Sign in / Sign up

Export Citation Format

Share Document