Schottky Contacts Regularized Linear Regression for Signal Inconsistency Circumvent in Resistive Gas Micro‐Nanosensors

Small Methods ◽  
2021 ◽  
pp. 2101194
Author(s):  
Yuxin Zhao ◽  
Yue Su ◽  
Mengya Guo ◽  
Liqun Liu ◽  
Peng Chen ◽  
...  
Author(s):  
Z. Liliental-Weber ◽  
C. Nelson ◽  
R. Ludeke ◽  
R. Gronsky ◽  
J. Washburn

The properties of metal/semiconductor interfaces have received considerable attention over the past few years, and the Al/GaAs system is of special interest because of its potential use in high-speed logic integrated optics, and microwave applications. For such materials a detailed knowledge of the geometric and electronic structure of the interface is fundamental to an understanding of the electrical properties of the contact. It is well known that the properties of Schottky contacts are established within a few atomic layers of the deposited metal. Therefore surface contamination can play a significant role. A method for fabricating contamination-free interfaces is absolutely necessary for reproducible properties, and molecularbeam epitaxy (MBE) offers such advantages for in-situ metal deposition under UHV conditions


Author(s):  
Yih-Cheng Shih ◽  
E. L. Wilkie

Tungsten silicides (WSix) have been successfully used as the gate materials in self-aligned GaAs metal-semiconductor-field- effect transistors (MESFET). Thermal stability of the WSix/GaAs Schottky contact is of major concern since the n+ implanted source/drain regions must be annealed at high temperatures (∼ 800°C). WSi0.6 was considered the best composition to achieve good device performance due to its low stress and excellent thermal stability of the WSix/GaAs interface. The film adhesion and the uniformity in barrier heights and ideality factors of the WSi0.6 films have been improved by depositing a thin layer of pure W as the first layer on GaAs prior to WSi0.6 deposition. Recently WSi0.1 has been used successfully as the gate material in 1x10 μm GaAs FET's on the GaAs substrates which were sputter-cleaned prior to deposition. These GaAs FET's exhibited uniform threshold voltages across a 51 mm wafer with good film adhesion after annealing at 800°C for 10 min.


2017 ◽  
Vol 23 (2) ◽  
pp. 121-137
Author(s):  
Ary Sutrischastini ◽  
Agus Riyanto

This paper will discuss the effect of work motivation (incentives, motives and expectations) on the performance of the staff of the Regional Secretariat Gunungkidul. The purpose of this paper is: 1) Determine the effect of incentives on the performance of the staff of the Regional Secretariat Gunungkidul, 2) Determine the effect of motive on the performance of the staff of the Regional Secretariat Gunungkidul, 3) To know the effect of expectations on the performance of the staff of the Regional Secretariat Gunungkidul, 4)To know the effect of incentives, motives and expectations on the performance of the staff of the Regional Secretariat Gunungkidul.Research sites in the Regional Secretariat Gunungkidul and the population is 162entire employee in the Regional Secretariat Gunungkidul. Samples amounted to 116 respondents taken with simple random probability sampling method. Data were analyzed using multiple linear regression. Results obtained: (1) incentives positive and significant effect on the performance of, (2) motif positive and significant effect on the performance of, (3) expectations positive and significant impact on the performance of , and (4) incentives, motives and expectations of positive and significant impact on the performance of the staff of the Regional Secretariat Gunungkidul.


Author(s):  
Eka Ambara Harci Putranta ◽  
Lilik Ambarwati

The study aims to analyze the influence of internal banking factors in the form of: Capital Adequency Ratio (CAR), Financing to Deposit Ratio (FDR) and Total Assets (TA) to Non Performing Financing at Sharia Banks. This research method used multiple linear regression analysis with the help of SPSS 16.00 software which is used to see the influence between the independent variables in the form of Capital Adequacy Ratio (CAR), Financing to Deposit Ratio (FDR) and Total Assets (TA) to Non Performing Financing. The sample of this study was 3 Islamic Commercial Banks, so there were 36 annual reports obtained through purposive sampling, then analyzed using multiple linear regression methods. The results showed that based on the F Test, the independent variable had an effect on the NPF, indicated by the F value of 17,016 and significance of 0,000, overall the independent variable was able to explain the effect of 69.60%. While based on the partial t test, showed that CAR has a significant negative effect, Total assets have a significant positive effect with a significance value below 0.05 (5%). Meanwhile FDR does not affect NPF.


Author(s):  
Evi Mariana

The purpose of this study was to analyze the factors that influence the decisionof the students chose to study in Obstetrics Prodi STIKES Muhammadiyah Ciamis and analyze the factors that most influence the decision of the students chose to study in Obstetrics Prodi STIKES Muhammadiyah Ciamis. Collecting data in this study was conducted using a survey by questionnaire to 114 students by stratified random sampling method. Methods of data analysis using multiple linear regression, F test and test T. The result is a marketing mix that significantly is the product, place, and physical evidence. And that does not affect the marketing mix is price, promotion, place, and processes


Sign in / Sign up

Export Citation Format

Share Document