scholarly journals Strength Reduction of Integer Division and Modulo Operations

2003 ◽  
pp. 254-273 ◽  
Author(s):  
Jeffrey Sheldon ◽  
Walter Lee ◽  
Ben Greenwald ◽  
Saman Amarasinghe
Keyword(s):  
Strength Reduction ◽  
Integer Division

Slope Stability Analysis under the Condition of Seepage

2012 ◽  
Vol 204-208 ◽  
pp. 241-245
Author(s):  
Yang Jin
Keyword(s):  
Finite Element Method ◽  
Shear Strength ◽  
Slope Stability ◽  
Negative Impact ◽  
Strength Reduction ◽  
Soil Slope ◽  
Failure State ◽  
Calculation Results ◽  
The Stability ◽  
Shear Strength Reduction

The stability of soil slope under seepage is calculated and analyzed by using finite element method based on the technique of shear strength reduction. When the condition of seepage or not is considered respectively, the critical failure state of slopes and corresponding safety coefficients can be determined by the numerical analysis and calculation. Besides, through analyzing and comparing the calculation results, it shows that seepage has a negative impact on slope stability.

Soil Strength Reduction Method Induced by Variation of Water Content

2012 ◽  
Vol 170-173 ◽  
pp. 847-852
Author(s):  
Peng Ming Jiang ◽  
Zhong Lei Yan ◽  
Peng Li
Keyword(s):  
Slope Stability ◽  
Unsaturated Soil ◽  
Unsaturated Soils ◽  
Characteristic Curve ◽  
Strength Reduction ◽  
Actual State ◽  
Soil Slope ◽  
Simple Method ◽  
The Common ◽  
The Stability

As the complexity of unsaturated soil theory, and it must have a long test period when we study the unsaturated soils, so the conventional design analysis software does not provide such analysis, so we can imagine that such a slope stability analysis does not accurately reflect the actual state of the slope. Based on the known soil moisture content，this paper use the soil water characteristic curve and strength theory of unsaturated soil to calculate the strength reduction parameters of soil which can calculate the stability of the soil slope when using the common calculation method. It is noticeable that this method can be extended and applied if we establish regional databases for this simple method, and these databases can improve the accuracy of the calculation of slope stability.

scholarly journals Effect of Recycled Coarse Aggregate and Bagasse Ash on Two-Stage Concrete

Crystals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 556
Author(s):  
Muhammad Faisal Javed ◽  
Afaq Ahmad Durrani ◽  
Sardar Kashif Ur Rehman ◽  
Fahid Aslam ◽  
Hisham Alabduljabbar ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Coarse Aggregate ◽  
Construction Material ◽  
Strength Reduction ◽  
Recycled Aggregate ◽  
Two Stage ◽  
Conventional Concrete ◽  
Recycled Coarse Aggregate ◽  
Coarse Aggregates

Numerous research studies have been conducted to improve the weak properties of recycled aggregate as a construction material over the last few decades. In two-stage concrete (TSC), coarse aggregates are placed in formwork, and then grout is injected with high pressure to fill up the voids between the coarse aggregates. In this experimental research, TSC was made with 100% recycled coarse aggregate (RCA). Ten percent and twenty percent bagasse ash was used as a fractional substitution of cement along with the RCA. Conventional concrete with 100% natural coarse aggregate (NCA) and 100% RCA was made to determine compressive strength only. Compressive strength reduction in the TSC was 14.36% when 100% RCA was used. Tensile strength in the TSC decreased when 100% RCA was used. The increase in compressive strength was 8.47% when 20% bagasse ash was used compared to the TSC mix that had 100% RCA. The compressive strength of the TSC at 250 °C was also determined to find the reduction in strength at high temperature. Moreover, the compressive and tensile strength of the TSC that had RCA was improved by the addition of bagasse ash.

Analysis of Unstable Rock-Mass Stability Based on Limit Equilibrium Method and Strength Reduction Method

2016 ◽  
Vol 858 ◽  
pp. 73-80
Author(s):  
Ying Kong ◽  
Hua Peng Shi ◽  
Hong Ming Yu
Keyword(s):  
Rock Mass ◽  
Failure Mode ◽  
Posterior Margin ◽  
Reduction Method ◽  
Limit Equilibrium ◽  
Limit Equilibrium Method ◽  
Strength Reduction ◽  
Strength Reduction Method ◽  
Rock Masses ◽  
Unstable Rock

With the slope unstable rock masses of a stope in Longsi mine, Jiaozuo City, China as the target, we computed and analyzed the stability of unstable rock masses using a limit equilibrium method (LEM) and a discrete element strength reduction method (SRM). Results show that the unstable rock masses are currently stable. Under the external actions of natural weathering, rainfall and earthquake, unstable rock mass 1 was manifested as a shear slip failure mode, and its stability was controlled jointly by bedding-plane and posterior-margin steep inclined joints. In comparison, unstable rock mass 2 was manifested as a tensile-crack toppling failure mode, and its stability was controlled by the perforation of posterior-margin joints. From the results of the 2 methods we find the safety factor determined from SRM is larger, but not significantly, than that from LEM, and SRM can simulate the progressive failure process of unstable rock masses. SRM also provides information about forces and deformation (e.g. stress-strain, and displacement) and more efficiently visualizes the parts at the slope that are susceptible to instability, suggesting SRM can be used as a supplementation of LEM.

Shear strength reduction of trapezoidal corrugated steel plates with artificial corrosion pits

2021 ◽  
Vol 180 ◽  
pp. 106583
Author(s):  
Wei Xing ◽  
Li Gang ◽  
Xiao Lin ◽  
Zhou Linjun ◽  
He Ke ◽  
...  
Keyword(s):  
Shear Strength ◽  
Strength Reduction ◽  
Steel Plates ◽  
Corrosion Pits ◽  
Shear Strength Reduction

scholarly journals Stability Analysis of Jointed Rock Slope by Strength Reduction Technique considering Ubiquitous Joint Model

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Ruili Lu ◽  
Wei Wei ◽  
Kaiwei Shang ◽  
Xiangyang Jing
Keyword(s):  
Rock Slope ◽  
Reduction Method ◽  
Domain Size ◽  
Jointed Rock ◽  
Strength Reduction ◽  
Hydropower Station ◽  
Strength Reduction Method ◽  
Vertical Side ◽  
The Stability ◽  
Jointed Rock Slope

In order to study the failure mechanism and assess the stability of the inlet slope of the outlet structure of Lianghekou Hydropower station, the strength reduction method considering the ubiquitous joint model is proposed. Firstly, two-dimension numerical models are built to investigate the influence of the dilation angle of ubiquitous joints, mesh discretization, and solution domain size on the slope stability. It is found that the factor of safety is insensitive to the dilation angle of ubiquitous joints and the solution domain size but sensitive to the mesh discretization when the number of elements less than a certain threshold. Then, a complex three-dimension numerical model is built to assess the stability of the inlet slope of the outlet structure of Lianghekou Hydropower station. During the strength reduction procedure, the progressive failure process and the final failure surface of the slope are obtained. Furthermore, the comparison of factors of safety obtained from strength reduction method and analytical solutions indicates that the effect of vertical side boundaries plays an important role in the stability of jointed rock slope, and the cohesive force is the main contribution to the resistant force of vertical side boundaries.

Sign in / Sign up

Export Citation Format

Share Document