Agility in High Speed Machining: Optimization between Tool and Holder

2007 ◽  
pp. 475-488
Author(s):  
Abdelkarim Ben Mhenni ◽  
Christian Mascle ◽  
Marek Balazinski
Keyword(s):  
High Speed ◽  
High Speed Machining ◽  
Machining Optimization

Tool wear in high speed machining

2000 ◽  
Vol 10 (PR9) ◽  
pp. Pr9-541-Pr9-546 ◽  
Author(s):  
A. Molinari ◽  
M. Nouari
Keyword(s):  
Tool Wear ◽  
High Speed ◽  
High Speed Machining

ANACONDA ALLOY 360

Alloy Digest ◽  
1982 ◽  
Vol 31 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
High Speed ◽  
Heat Treating ◽  
High Speed Machining ◽  
Copper Base ◽  
Screw Machine ◽  
Medium Strength ◽  
Machining Operations ◽  
Strength And Ductility

Abstract ANACONDA Alloy 360 is a leaded brass and is the alloy most often used for high-speed machining operations; it fills most of the needs for such purposes. Alloy 360 is the standard free-cutting brass and its machinability has become the standard by which all other copper-base alloys are rated. It has medium strength and ductility. Alloy 360 is used for hardware such as gears and pinions where excellent machinability is of prime importance and for all types of automatic high-speed screw-machine products. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-447. Producer or source: Anaconda American Brass Company.

Research on High-Speed Cutting of Cr12MoV Hardened Steel - A Review

2020 ◽  
Vol 15 ◽  
Author(s):  
Fei Sun ◽  
Guohe Li ◽  
Qi Zhang ◽  
Meng Liu
Keyword(s):  
High Speed ◽  
Cutting Temperature ◽  
High Hardness ◽  
High Strength ◽  
Hardened Steel ◽  
Parameters Optimization ◽  
Future Research ◽  
High Speed Machining ◽  
Machined Surface ◽  
Stamping Die

: Cr12MoV hardened steel is widely used in the manufacturing of stamping die because of its high strength, high hardness, and good wear resistance. As a kind of mainstream cutting technology, high-speed machining has been applied in the machining of Cr12MoV hardened steel. Based on the review of a large number of literature, the development of high-speed machining of Cr12MoV hardened steel was summarized, including the research status of the saw-tooth chip, cutting force, cutting temperature, tool wear, machined surface quality, and parameters optimization. The problems that exist in the current research were discussed and the directions of future research were pointed out. It can promote the development of high-speed machining of Cr12MoV hardened steel.

Whole process analysis of microstructure evolution during chip formation of high-speed machining OFHC copper

2021 ◽  
Vol 66 ◽  
pp. 470-482
Author(s):  
Hongguang Liu ◽  
Jun Zhang ◽  
Binbin Xu ◽  
Huijie Zhang ◽  
Wanhua Zhao
Keyword(s):  
Microstructure Evolution ◽  
Chip Formation ◽  
High Speed ◽  
Process Analysis ◽  
Ofhc Copper ◽  
High Speed Machining ◽  
Whole Process

Implementation of ultra-high speed machining with an edge tool

2021 ◽  
Author(s):  
V. M. Korneeva ◽  
S. S. Korneev
Keyword(s):  
High Speed ◽  
High Speed Machining ◽  
Ultra High Speed ◽  
Edge Tool

Collision-Free Tool Path Generation for Five-Axis High Speed Machining

2011 ◽  
Vol 474-476 ◽  
pp. 961-966 ◽  
Author(s):  
Li Qiang Zhang ◽  
Min Yue
Keyword(s):  
Image Analysis ◽  
Collision Detection ◽  
High Speed ◽  
Tool Path ◽  
Geometric Model ◽  
High Speed Machining ◽  
Analysis Method ◽  
Geometric Information ◽  
Detection Approach ◽  
Five Axis

Collision detection is a critical problem in five-axis high speed machining. Using a combination of process simulation and collision detection based on image analysis, a rapid detection approach is developed. The geometric model provides the cut geometry for the collision detection and records a dynamic geometric information for in-process workpiece. For the precise collision detection, a strategy of image analysis method is developed in order to make the approach efficient and maintian a high detection precision. An example of five-axis machining propeller is studied to demonstrate the proposed approach. It has shown that the collision detection task can be achieved with a near real-time performance.

Sign in / Sign up

Export Citation Format

Share Document