Fullerenes and Carbon Nano-onions for Environmental Application

Author(s):  
Yusong Li ◽  
Megan Seymour
2018 ◽  
Vol 18 (11) ◽  
pp. 1020-1029 ◽  
Author(s):  
Aftab Aslam P. Khan ◽  
Anish Khan ◽  
Abdullah M. Asiri ◽  
Ghulam Md. Ashraf ◽  
Basma G. Alhogbia

1998 ◽  
Vol 63 (11) ◽  
pp. 1938-1944 ◽  
Author(s):  
Vratislav Tukač ◽  
Jiří Vokál ◽  
Jiří Hanika

Catalytic activity of CuO-supported catalyst in phenol oxidation, and the influence of reaction conditions, viz. temperature (125-170 °C), oxygen partial pressure (1-7 MPa) and liquid feed (30-760 ml h-1), in the continuous operation using 17.9 mm i.d. trickle-bed reactor is presented. The hydrodynamic impact on the three-phase trickle-bed reactor performance in an environmental application of catalytic wet oxidation was also investigated. The results of trickle-bed operation were strongly influenced by wetting efficiency. An insufficient catalyst wetting can be to compensated by filling the catalyst bed voids by fine glass spheres. In the case of the gas transfer limited reaction, a better wetting of the catalyst can lead to worse reactor performance due to lower reaction rates.


Author(s):  
Changjian Xie ◽  
Yuhui Ma ◽  
Peng Zhang ◽  
Junzhe Zhang ◽  
Xiaowei Li ◽  
...  

With the increasing environmental application and discharge of nano cerium dioxide (nano-CeO2), it is urgent to fully understand its ecotoxicological effects on the aquatic environment. This study for the first...


Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1006
Author(s):  
Samsul Rizal ◽  
Abdul Khalil H. P. H. P. S. ◽  
A. A. Oyekanmi ◽  
Niyi G. Olaiya ◽  
C. K. Abdullah ◽  
...  

The exponential increase in textile cotton wastes generation and the ineffective processing mechanism to mitigate its environmental impact by developing functional materials with unique properties for geotechnical applications, wastewater, packaging, and biomedical engineering have become emerging global concerns among researchers. A comprehensive study of a processed cotton fibres isolation technique and their applications are highlighted in this review. Surface modification of cotton wastes fibre increases the adsorption of dyes and heavy metals removal from wastewater. Cotton wastes fibres have demonstrated high adsorption capacity for the removal of recalcitrant pollutants in wastewater. Cotton wastes fibres have found remarkable application in slope amendments, reinforcement of expansive soils and building materials, and a proven source for isolation of cellulose nanocrystals (CNCs). Several research work on the use of cotton waste for functional application rather than disposal has been done. However, no review study has discussed the potentials of cotton wastes from source (Micro-Nano) to application. This review critically analyses novel isolation techniques of CNC from cotton wastes with an in-depth study of a parameter variation effect on their yield. Different pretreatment techniques and efficiency were discussed. From the analysis, chemical pretreatment is considered the most efficient extraction of CNCs from cotton wastes. The pretreatment strategies can suffer variation in process conditions, resulting in distortion in the extracted cellulose’s crystallinity. Acid hydrolysis using sulfuric acid is the most used extraction process for cotton wastes-based CNC. A combined pretreatment process, such as sonication and hydrolysis, increases the crystallinity of cotton-based CNCs. The improvement of the reinforced matrix interface of textile fibres is required for improved packaging and biomedical applications for the sustainability of cotton-based CNCs.


2011 ◽  
Vol 11 (1) ◽  
pp. 681-685 ◽  
Author(s):  
Hankwon Chang ◽  
Jonian Nikolov ◽  
Sun-Kyung Kim ◽  
Hee Dong Jang ◽  
Seng Lim ◽  
...  

2022 ◽  
Vol 422 ◽  
pp. 126925
Author(s):  
Tuan A.H. Nguyen ◽  
Xingyun Guo ◽  
Fang You ◽  
Narottam Saha ◽  
Songlin Wu ◽  
...  

2012 ◽  
Vol 11 (02) ◽  
pp. 1250019 ◽  
Author(s):  
RAJESH KUMAR ◽  
S. K. JAIN

This study was carried out to evaluate the environmental application of functionalized carbon nanotubes through the experimental removal of strontium (II) from water. The aim was to find the optimal condition for the removal of strontium from water under different conditions such as initial concentration of strontium, contact time and neutral pH. The functionalized multi wall carbon nanotubes (f-MWCNT) were characterized by FT-IR and scanning electron microscopy (SEM). The adsorption isotherms were correlated to Freundlich and Langmuir models and it was found that the adsorption data could be fitted better by Langmuir model than Freundlich one. The kinetic data shows that the adsorption describes well with the pseudo-second order kinetic model. Functionalized MWCNT can be used as good adsorbent for the removal of the strontium ions from polluted water according to results.


Sign in / Sign up

Export Citation Format

Share Document