The Effect of MgO and MgO–Al2O3 on Zirconia Produced by Precipitation Method

2015 ◽  
pp. 129-135
Author(s):  
M. Ipek
Keyword(s):  
Precipitation Method

The Fractionation Properties of Human Factor VIII (Antihaemophilic Factor)

1960 ◽  
Vol 04 (02) ◽  
pp. 253-260 ◽  
Author(s):  
Franco Gobbi
Keyword(s):  
Factor Viii ◽  
Human Factor ◽  
Maximum Yield ◽  
Factor Vii ◽  
Precipitation Method ◽  
Salting Out ◽  
Human Factor Viii ◽  
Plasma Factor ◽  
Two Factors ◽  
Thromboplastic Activity

SummaryThe fractionation properties of human Factor VIII (antihaemophilic factor, AHF, antihaemophilic globulin) have been studied using a plasma of congenital afibrinogenaemia as a starting material.From a fibrinogen-free plasma, Factor VIII does not precipitate with ethanol at a final concentration of 8%; on the contrary the maximum yield is reached at an ethanol concentration of 25%.With a precipitation method carried out by a one to ten dilution of plasma with distilled water and acidification by N/10 hydrochloric acid to a pFI 5.2, Factor VIII does not precipitate with the euglobulin fraction; when normal plasma is used, such a precipitation is almost complete.With the salting-out fractionation method by ammonium sulphate, Factor VIII precipitates at a concentration between 25 and 33% of saturation either from fibrinogen-free and from normal human plasma.A non-specific thromboplastic activity appears in the fractions prepared by every method. This activity, which is probably due to the activation of seric accelerators, is easily removed by Al(OH)s adsorption. Thus, in order to insure the specificity of Factor VIII assays, the preliminary adsorption of the fractions is indispensable before testing their antihaemophilic activity.Fibrinogen and Factor VIII have different and definite precipitation patterns. When these two factors are associated the fractionation properties of AHF appear quite modified, showing a close similarity to those of fibrinogen. This fact can explain the technical difficulties encountered in the attempt to purify the antihaemophilic factor, and the lack of reproducible procedures for removing fibrinogen without affecting Factor VII.

Luminescence Properties of Europium-Doped Yttrium Oxides Derived from Their Dodecylsulfate-Templated Mesostructure and Nanotube Forms

2003 ◽  
Vol 775 ◽  
Author(s):  
Tsuyoshi Kijima ◽  
Kenichi Iwanaga ◽  
Tomomi Hamasuna ◽  
Shinji Mohri ◽  
Mitsunori Yada ◽  
...  
Keyword(s):  
Room Temperature ◽  
Broad Band ◽  
Concentration Quenching ◽  
Precipitation Method ◽  
Homogeneous Precipitation ◽  
Bulk Materials ◽  
Main Band ◽  
Homogeneous Precipitation Method ◽  
Order Of Magnitude ◽  
Weak Luminescence

AbstractEuropium-doped hexagonal-mesostructured and nanotubular yttrium oxides templated by dodecylsulfate species as well as surfactant free bulk oxides were synthesized by the homogeneous precipitation method. All the as grown nanostructured or bulk materials with amorphous or poorly crystalline frameworks showed weak luminescence bands at room temperature. On calcination at 1000°C these materials were converted into highly crystalline yttrium oxides, resulting in a total increase in intensity of all the bands by one order of magnitude. In the hexagonal-mesostructured system, the main band due to the 5D0-7F2 transition for the calcined phases showed a sharp but asymmetrical multiplet splitting indicating multiple Eu sites. Concentration quenching was found at a Eu content of 3 mol% or above for these phases. In contrast, the main emission for the calcined solids in the nanotubular system occurred as poorly resolved broad band and the intensity of the main band at higher Eu content was significantly enhanced compared with those for the other two systems.

Magnetic and dielectric properties of BiFeO3 nanoparticles

2015 ◽  
Vol 7 (2) ◽  
pp. 1393-1403
Author(s):  
Dr R.P VIJAYALAKSHMI ◽  
N. Manjula ◽  
S. Ramu ◽  
Amaranatha Reddy
Keyword(s):  
Diffuse Reflectance Spectrum ◽  
Precipitation Method ◽  
Secondary Phases ◽  
X Ray Diffraction ◽  
Bifeo3 Nanoparticles ◽  
Transmission Electron ◽  
Multiferroic Bifeo3 ◽  
Pure Phase ◽  
Simple Chemical ◽  
Co Precipitation

Single crystalline nano-sized multiferroic BiFeO3 (BFO) powders were synthesized through simple chemical co-precipitation method using polyethylene glycol (PEG) as capping agent. We obtained pure phase BiFeO3 powder by controlling pHand calcination temperature. From X-ray diffraction studies the nanoparticles were unambiguously identified to have a rhombohedrally distorted perovskite structure belonging to the space group of R3c. No secondary phases were detected. It indicates single phase structure. EDX spectra indicated the appearance of three elements Bi, Fe, O in 1:1:3. From the UV-Vis diffuse reflectance spectrum, the absorption cut-off wavelength of the BFO sample is around 558nm corresponding to the energy band gap of 2.2 eV. The size (60-70 nm) and morphology of the nanoparticles have been analyzed using transmission electron microscopy (TEM).   Linear M−H behaviour and slight hysteresis at lower magnetic field is observed for BiFeO3 nanoparticles from Vibrating sample magnetometer studies. It indicates weak ferromagnetic behaviour at room temperature. From dielectric studies, the conductivity value is calculated from the relation s = L/RbA Sm-1 and it is around 7.2 x 10-9 S/m.

Validation of Simvastatin Analysis Methods in Human Blood Plasma (In Vitro) Using HPLC-UV Detector

2018 ◽  
Vol 8 (2) ◽  
Author(s):  
Iyan Sopyan ◽  
Cynthia Jaya ◽  
Driyanti Rahayu
Keyword(s):  
Blood Plasma ◽  
Human Plasma ◽  
Disease Risk ◽  
Protein Precipitation ◽  
Precipitation Method ◽  
Human Blood Plasma ◽  
Analysis Method ◽  
Uv Detector ◽  
Number Of Patients ◽  
System Suitability

The use of simvastatin (SV) increases along with the increasing number of patients with hyperlipidemia and cardiovascular disease risk factors. Consequently, this condition leads to the increasing need of analytical determination of SV in blood plasma. Analysis of SV in human plasma using protein precipitation method and HPLC with UV detector has not been reported. This research was purpose to find out the rapid, accurate, and valid of SV analysis method in human plasma. In this research plasma samples were treated with protein precipitation method. The analyte was then analyzed using HPLC with C18 column 250x4 mm and 5 µm of particle size, the mobile phase contained of phosphate buffer 0.01 M (pH 4.0) and acetonitrile 30:70 v/v with flow rate 1 mL/minute, and detected at 239 nm. The analysis method was validated based on some parameters, such as selectivity, accuracy, precision, repeatability, linearity, LOD, LOQ, and system suitability. The result showed selectivity represented by Rs was 2.870, repeatability by its CV less than 2%, and linearity by its coefficient correlation (r) 0.9992 for concentration range 0.08-0.32 ppm. Based on chromatogram peak area, LOD and LOQ were 0.0132 and 0.0440 ppm respectively, accuracy and precision were 86.25-89.36% and 0.66-1.81% were obtained. The result of system suitability test from retention time and chromatogram peak area showed by its CV less than 2%. The analysis method was proved to be valid for SV analysis in human plasma

Acalypha Indica mediated MgO NPs: A novel approach in greener route with its antibacterial activity against pathogens

2020 ◽  
Vol 3 (2) ◽  
Author(s):  
Kavipriya K C ◽  
Sudha A P ◽  
Sujatha K ◽  
Sowmya Lakshmi K
Keyword(s):  
Antibacterial Activity ◽  
Metal Oxides ◽  
Bacterial Species ◽  
Magnesium Nitrate ◽  
Precipitation Method ◽  
Average Crystalline Size ◽  
Face Centered Cubic ◽  
X Ray ◽  
Novel Approach ◽  
Acalypha Indica

The interest in miniaturization of particles revealed the hidden applications of metal oxides. The potential applications of the particles may vary when the size of the particle is reduced. One of the alternative routes to the conventional approach is the use of plant extract for the synthesis of metal oxides NPs. In the framework of this study, the ecofriendly MgO nanoparticles were synthesized using Acalypha Indica leaf extract,functioning as reducing and capping agent by co-precipitation method. The predecessor taken here was Magnesium Nitrate. The biologically synthesized MgO NPs were characterized by various techniques like X ray diffraction(XRD), Fourier Transform infrared spectroscopy(FTIR), Scanning electron microscope (SEM) with Energy Dispersive X-ray spectroscopy(EDX) profile and its antibacterial activity is evaluated against causative organisms. XRD studies confirmed the face centered cubic crystalline structure of MgO NPs and the average crystalline size of MgO NPs calculated using Scherer’s formula was found to be 13 nm. FTIR spectrum shows a significant Mg-O vibrational band. Purity, surface morphology and chemical composition of elements were confirmed by SEM with EDX. The SEM result shows the fine spherical morphology with the grain size range between 43nm to 62nm. Antimicrobial assay of MgO NPs was examined against gram positive and negative bacteria. Appreciated activity was observed on the Staphylococcus aureus bacterial species. In general, the renewed attempt of this facile approach gave the optimum results of multifunctional MgO NPs.

Appraisal of innovative phytosynthetic CdO NPs from leaf extract of Ocimum Sanctum and their bactericidal activity against different strains

2020 ◽  
Vol 3 (2) ◽  
Author(s):  
Aarth R ◽  
Sudha A P ◽  
Sujatha B ◽  
Sowmya Lakshmi K
Keyword(s):  
Leaf Extract ◽  
Cadmium Oxide ◽  
Morphological Properties ◽  
Precipitation Method ◽  
Ocimum Sanctum ◽  
Oxide Nanoparticles ◽  
Average Crystalline Size ◽  
Face Centered Cubic ◽  
Bacterial Strains ◽  
X Ray

The phytosynthesis of n-type Cadmium Oxide Nanoparticles reduces the toxicity of the substance and makes it Eco-friendly. This Eco-friendly biosynthesis of CdO NPs was synthesized for the first time from the Queen of herbs, Ocimum Sanctum (holy basil).The biosynthesized Cadmium oxide was prepared using Ocimum leaf extract as a reductant and Cadmium Chloride and hydroxide as cadmium and oxide source materials by Co- Precipitation method. Thus obtained Cadmium Oxide Nanoparticles were characterized by different techniques such as X-ray diffraction (XRD), Fourier Transform infrared spectroscopy (FTIR), Scanning electron microscope (SEM),Energy dispersive X-ray spectroscopy(EDS) to study the structural and morphological properties. XRD pattern exhibited the formation of face centered cubic structure of CdO NPs with an average crystalline size of 11.5nm .The chemical bond formation of CdO NPs were confirmed by FTIR spectrum in the range of (400-4000cm-1). The SEM micrographs revealed the predominant formation of Cauliflower shape with a particle size in the range of 61-142nm. The high purity of the biosynthesized nanoparticles were confirmed by EDS analysis. Further it was tested against gram positive and gram negative bacterial strains and showed significant antibacterial activity. This biosynthetic research study opens an innovative window to progress our understanding of how CdO NPs shows resistance to different bacterial strains.

Exploring the characterization of Ni doped MgO nanoparticles using co-precipitation method

2020 ◽  
Vol 3 (1) ◽  
pp. 30-33
Author(s):  
Muthulakshmi M ◽  
Madhumitha G
Keyword(s):  
Magnesium Oxide ◽  
Analytical Techniques ◽  
Nickel Chloride ◽  
Precipitation Method ◽  
Crystalline Powder ◽  
High Melting Point ◽  
Design Synthesis ◽  
Mgo Nanoparticles ◽  
Co Precipitation

Nanotechnology is a field of applied science focused on design, synthesis and characterization of nanomaterials. The nickel and magnesium have improved their applications in transparent electrodes and nano electronics. In addition, magnesium oxide has moisture resistance and high melting point properties. In the present work has been carried out in the development of green crystalline powder of nickel doped magnesium oxide nanoparticles by Co-precipitation method, from the mixture of nickel chloride and magnesium chloride with KOH as solvent. From the XRD results, crystalline size of the particle can be observed. Spherical structure of Ni doped MgO nanoparticles were indicated by SEM results and powdered composition of samples were obtained from FTIR. EDAX represents the peak composition of the nanoparticle. The above analytical techniques have confirmed that the Ni doped MgO nanoparticles obtained from the mixture of NiCl2 and MgCl2.

Development and Characterization Colchicine-Loaded PEGylated Gelatin Nanoparticles for Targeted Delivery to Tumor

2013 ◽  
Vol 6 (2) ◽  
pp. 2058-2063
Author(s):  
G D Chandrethiya ◽  
P K Shelat ◽  
M N Zaveri
Keyword(s):  
Drug Delivery ◽  
Targeted Delivery ◽  
High Performance ◽  
Entrapment Efficiency ◽  
Stability Study ◽  
Spherical Particles ◽  
Precipitation Method ◽  
Antitumoral Activity ◽  
Gelatin Nanoparticles

PEGylated gelatin nanoparticles loaded with colchicine were prepared by ethanol precipitation method. Poly-(ethylene glycol)-5000-monomethylether (MPEG 5000), a hydrophilic polymer, was used to pegylate gelatin.  Gluteraldehyde was used as cross-linking agent. To obtain a high quality product, major formulation parameters were optimized.  Spherical particles with mean particles of 193 nm were measured by a Malvern particle size analyzer. Entrapment efficiency was found to be 71.7 ± 1.4% and determined with reverse phase high performance liquid charomatography (RP-HPLC). The in vitro drug release study was performed by dialysis bag method for a period of 168 hours. Lyophilizaton study showed sucrose at lower concentrations proved the best cryoprotectant for this formulation.  Stability study revealed that lyophilized nanoparticles were equally effective (p < 0.05) after one year of storage at 2-8°C with ambient humidity. In vitro antitumoral activity was accessed using the MCF-7 cell line by MTT assay.  The IC50 value was found to be 0.034 μg/ml for the prepared formulation. The results indicate that PEGylated gelatin nanoparticles could be utilized as a potential drug delivery for targeted drug delivery of tumors.  

Sign in / Sign up

Export Citation Format

Share Document