Experimental Validation of Models: In Situ TEM for Radiation Damage

2018 ◽  
pp. 1-14
Author(s):  
Kazuto Arakawa ◽  
Michael P. Short
Keyword(s):  
Radiation Damage ◽  
Experimental Validation ◽  
In Situ Tem ◽  
Validation Of Models

scholarly journals Using in-situ TEM Triple Ion Beam Irradiations to Study the Effects of Deuterium, Helium, and Radiation Damage on TPBAR Components

2017 ◽  
Vol 23 (S1) ◽  
pp. 2216-2217 ◽  
Author(s):  
Caitlin Taylor ◽  
Brittany Muntifering ◽  
Clark Snow ◽  
Khalid Hattar ◽  
David Senor
Keyword(s):  
Radiation Damage ◽  
Ion Beam ◽  
In Situ Tem ◽  
Triple Ion

scholarly journals In situ TEM observation of alpha-particle induced annealing of radiation damage in Durango apatite

2017 ◽  
Vol 7 (1) ◽  
Author(s):  
Weixing Li ◽  
Yahui Shen ◽  
Yueqing Zhou ◽  
Shuai Nan ◽  
Chien-Hung Chen ◽  
...  
Keyword(s):  
Radiation Damage ◽  
Alpha Particle ◽  
In Situ Tem

In-Situ Tem Observations of Electron Beam-Stimulated Reactions in NiO Under Oxidizing and Reducing Atmospheres

1991 ◽  
Vol 235 ◽  
Author(s):  
M. I. Buckett ◽  
L. D. Marks
Keyword(s):  
Radiation Damage ◽  
High Vacuum ◽  
Ultra High Vacuum ◽  
In Situ Tem ◽  
Transmission Electron ◽  
In Situ Experiments ◽  
Damage Process ◽  
Electron Stimulated Desorption ◽  
Surface Environment

ABSTRACT:L: NiO surfaces have been the subject of numerous investigations using a wide variety of techniques, including transmission electron microscopy (TEM). The findings, however, remain inconclusive regarding the relative contributions of irradiation effects such as ballistic erosion, electron-stimulated desorption (ESD) and electron-stimulated reaction (ESR), especially at incident electron energies exceeding 100 keV. In earlier studies it was suggested that the surface environment played a significant role in the radiation damage process. In this study, the effect of the surface environment is further illustrated by in-situ experiments in controlled sample environments. NiO surfaces were irradiated with electrons, ranging in energy from 3 keV to 300 keV, and examined in-situ under ultra-high vacuum (UHV) conditions (10−10 Torr), as well as in controlled oxidizing (oxygen) and reducing (CO) atmospheres. The nature of the surface reactions and their contribution to the overall radiation damage process in the various energy regimes is examined.

In situ TEM studies of irradiation effects for materials improvement

1991 ◽  
Vol 49 ◽  
pp. 452-453
Author(s):  
Charles W. Allen
Keyword(s):  
Nuclear Reactor ◽  
Austenitic Stainless Steels ◽  
High Energy ◽  
Point Of View ◽  
In Situ Tem ◽  
Irradiation Effects ◽  
Tem Analysis ◽  
Radiation Induced ◽  
Analytical Tools

Irradiation effects studies employing TEMs as analytical tools have been conducted for almost as many years as materials people have done TEM, motivated largely by materials needs for nuclear reactor development. Such studies have focussed on the behavior both of nuclear fuels and of materials for other reactor components which are subjected to radiation-induced degradation. Especially in the 1950s and 60s, post-irradiation TEM analysis may have been coupled to in situ (in reactor or in pile) experiments (e.g., irradiation-induced creep experiments of austenitic stainless steels). Although necessary from a technological point of view, such experiments are difficult to instrument (measure strain dynamically, e.g.) and control (temperature, e.g.) and require months or even years to perform in a nuclear reactor or in a spallation neutron source. Consequently, methods were sought for simulation of neutroninduced radiation damage of materials, the simulations employing other forms of radiation; in the case of metals and alloys, high energy electrons and high energy ions.

In situ TEM measurements of the electrical properties of interface dislocations

1992 ◽  
Vol 50 (2) ◽  
pp. 1338-1339
Author(s):  
F. M. Ross ◽  
R. Hull ◽  
D. Bahnck ◽  
J. C. Bean ◽  
L. J. Peticolas ◽  
...  
Keyword(s):  
Electrical Properties ◽  
Electronic Device ◽  
In Situ Tem ◽  
Device Performance ◽  
Misfit Dislocations ◽  
Electrical Characteristics ◽  
Strained Layer ◽  
Transmission Electron ◽  
Interfacial Dislocations

We describe an investigation of the electrical properties of interfacial dislocations in strained layer heterostructures. We have been measuring both the structural and electrical characteristics of strained layer p-n junction diodes simultaneously in a transmission electron microscope, enabling us to correlate changes in the electrical characteristics of a device with the formation of dislocations.The presence of dislocations within an electronic device is known to degrade the device performance. This degradation is of increasing significance in the design and processing of novel strained layer devices which may require layer thicknesses above the critical thickness (hc), where it is energetically favourable for the layers to relax by the formation of misfit dislocations at the strained interfaces. In order to quantify how device performance is affected when relaxation occurs we have therefore been investigating the electrical properties of dislocations at the p-n junction in Si/GeSi diodes.

In situ TEM Studies of agglomeration of sub-nanometer Ru layers in Ru/C multilayers

1992 ◽  
Vol 50 (1) ◽  
pp. 256-257
Author(s):  
Tai D. Nguyen ◽  
Ronald Gronsky ◽  
Jeffrey B. Kortright
Keyword(s):  
Layered Structure ◽  
Driving Force ◽  
High Energy ◽  
Superior Performance ◽  
In Situ Tem ◽  
Rayleigh Instability ◽  
Practical Applications ◽  
Transmission Electron ◽  
Diffraction Patterns

Nanometer period Ru/C multilayers are one of the prime candidates for normal incident reflecting mirrors at wavelengths < 10 nm. Superior performance, which requires uniform layers and smooth interfaces, and high stability of the layered structure under thermal loadings are some of the demands in practical applications. Previous studies however show that the Ru layers in the 2 nm period Ru/C multilayer agglomerate upon moderate annealing, and the layered structure is no longer retained. This agglomeration and crystallization of the Ru layers upon annealing to form almost spherical crystallites is a result of the reduction of surface or interfacial energy from die amorphous high energy non-equilibrium state of the as-prepared sample dirough diffusive arrangements of the atoms. Proposed models for mechanism of thin film agglomeration include one analogous to Rayleigh instability, and grain boundary grooving in polycrystalline films. These models however are not necessarily appropriate to explain for the agglomeration in the sub-nanometer amorphous Ru layers in Ru/C multilayers. The Ru-C phase diagram shows a wide miscible gap, which indicates the preference of phase separation between these two materials and provides an additional driving force for agglomeration. In this paper, we study the evolution of the microstructures and layered structure via in-situ Transmission Electron Microscopy (TEM), and attempt to determine the order of occurence of agglomeration and crystallization in the Ru layers by observing the diffraction patterns.

In situ TEM observations of melting in nanosized eutectic Pb-Cd inclusions embedded in Al

1996 ◽  
Vol 54 ◽  
pp. 986-987
Author(s):  
S. Hagège ◽  
U. Dahmen ◽  
E. Johnson ◽  
A. Johansen ◽  
V.S. Tuboltsev
Keyword(s):  
Electron Microscope ◽  
Melt Spinning ◽  
Ternary Alloys ◽  
Solid Matrix ◽  
Eutectic System ◽  
In Situ Tem ◽  
In Situ Observation ◽  
Orientation Relationships ◽  
Transmission Electron

Small particles of a low-melting phase embedded in a solid matrix with a higher melting point offer the possibility of studying the mechanisms of melting and solidification directly by in-situ observation in a transmission electron microscope. Previous studies of Pb, Cd and other low-melting inclusions embedded in an Al matrix have shown well-defined orientation relationships, strongly faceted shapes, and an unusual size-dependent superheating before melting.[e.g. 1,2].In the present study we have examined the shapes and thermal behavior of eutectic Pb-Cd inclusions in Al. Pb and Cd form a simple eutectic system with each other, but both elements are insoluble in solid Al. Ternary alloys of Al (Pb,Cd) were prepared from high purity elements by melt spinning or by sequential ion implantation of the two alloying additions to achieve a total alloying addition of up to lat%. TEM observations were made using a heating stage in a 200kV electron microscope equipped with a video system for recording dynamic behavior.

Postmortem and in situ TEM methods to study the mechanism of failure in controlled-morphology high-impact polystrene resin

1996 ◽  
Vol 54 ◽  
pp. 178-179
Author(s):  
R. C. Cieslinski ◽  
M. T. Dineen ◽  
J. L. Hahnfeld
Keyword(s):  
Poisson Ratio ◽  
Acrylonitrile Butadiene Styrene ◽  
High Impact ◽  
In Situ Tem ◽  
Styrene Copolymers ◽  
Controlled Morphology ◽  
Point Bend ◽  
Mechanism Of Failure ◽  
Impact Energies

Advanced Styrenic resins are being developed throughout the industry to bridge the properties gap between traditional HIPS (High Impact Polystyrene) and ABS (Acrylonitrile-Butadiene-Styrene copolymers) resins. These new resins have an unprecedented balance of high gloss and high impact energies. Dow Chemical's contribution to this area is based on a unique combination of rubber morphologies including labyrinth, onion skin, and core-shell rubber particles. This new resin, referred as a controlled morphology resin (CMR), was investigated to determine the toughening mechanism of this unique rubber morphology. This poster will summarize the initial studies of these resins using the double-notch four-point bend test of Su and Yee, tensile stage electron microscopy, and Poisson Ratio analysis of the fracture mechanism.

Sign in / Sign up

Export Citation Format

Share Document