Interior Noise Prediction in High-Speed Rolling Stock Driver’s Cab: Focus on Structure-Borne Paths (Mechanical and Aero Sources)

2012 ◽  
pp. 445-452 ◽  
Author(s):  
J. Sapena ◽  
A. Tabbal ◽  
J. Jové ◽  
F. Guerville
Keyword(s):  
High Speed ◽  
Interior Noise ◽  
Rolling Stock ◽  
Noise Prediction

Methodology to evaluate the uncertainty of train exterior noise prediction

2019 ◽  
Vol 233 (18) ◽  
pp. 6460-6472
Author(s):  
E Latorre Iglesias ◽  
J Xia ◽  
ME Farooq ◽  
A Bistagnino ◽  
J Sapena
Keyword(s):  
Uncertainty Assessment ◽  
Interior Noise ◽  
Uncertainty Evaluation ◽  
Rolling Stock ◽  
Noise Prediction ◽  
Environment Friendly ◽  
Certification Process ◽  
Eu Directives ◽  
Design Options ◽  
The Cost

Noise emissions play a key role in the development of environment-friendly rolling stock. Noise limits given by EU directives for interoperability purposes but also by internal directives of the different countries where any kind of rolling stock operates have to be respected for train approval. Exterior noise predictions are used nowadays to validate the design of new rolling stock. These predictions are used within the companies to evaluate the different design options, to optimize costs, to assess the risks and for virtual certification in cases where existing products are modified. Potentially predictions could be used in the future for a complete virtual certification of the train allowing to decrease or even to completely avoid the noise tests that are currently carried out by the train manufacturers. As a consequence, the cost of the certification process will be reduced. One of the challenges for a complete virtual certification is the assessment of uncertainties in the predictions as probably this will not be accepted by the stakeholders without a defined and validated uncertainty assessment. This work presents a methodology to estimate the uncertainty of the predictions of train noise emissions. An example of the application of the proposed framework for uncertainty evaluation is provided for a typical suburban rolling stock showing the feasibility of its use for railway exterior noise predictions but potentially also for interior noise calculations and for different applications other than railway.

scholarly journals 117 Interior noise prediction of a rolling stock by statistical energy analysis

2013 ◽  
Vol 2013.23 (0) ◽  
pp. 78-81
Author(s):  
Takashi YOSHIZAWA ◽  
Yasushi TAKANO ◽  
Toshihiko MOCHIDA ◽  
Michio SEBATA ◽  
Kazuhiro MAKINO
Keyword(s):  
Energy Analysis ◽  
Interior Noise ◽  
Rolling Stock ◽  
Noise Prediction ◽  
Statistical Energy Analysis

Durability Analysis of the Reduction Gear for High Speed Train Considering Driving Histories

2012 ◽  
Vol 586 ◽  
pp. 269-273
Author(s):  
Chul Su Kim ◽  
Gil Hyun Kang
Keyword(s):  
Fatigue Life ◽  
High Speed ◽  
Element Model ◽  
Rolling Stock ◽  
Reduction Gear ◽  
High Speed Train ◽  
Analysis Software ◽  
Tractive Effort ◽  
Durability Analysis ◽  
The Finite Element Model

To assure the safety of the power bogies for train, it is important to perform the durability analysis of reduction gear considering a variation of velocity and traction motor capability. In this study, two types of applied load histories were constructed from driving histories considering the tractive effort and the train running curves by using dynamic analysis software (MSC.ADAMS). Moreover, this study was performed by evaluating fatigue damage of the reduction gears for rolling stock using durability analysis software (MSC.FATIGUE). The finite element model for evaluating the carburizing effect on the gear surface was used for predicting the fatigue life of the gears. The results showed that the fatigue life of the reduction gear would decrease with an increasing numbers of stops at station.

scholarly journals An investigation into high-speed train interior noise with operational transfer path analysis method

2021 ◽  
Author(s):  
Muxiao Li ◽  
Ziwei Zhu ◽  
Tiesong Deng ◽  
Xiaozhen Sheng
Keyword(s):  
Sound Source ◽  
Reference Point ◽  
Source Identification ◽  
High Speed ◽  
Interior Noise ◽  
Target Point ◽  
High Speed Train ◽  
Transfer Path ◽  
Sound Source Identification ◽  
Transfer Path Analysis

AbstractPassengers' demands for riding comfort have been getting higher and higher as the high-speed railway develops. Scientific methods to analyze the interior noise of the high-speed train are needed and the operational transfer path analysis (OTPA) method provides a theoretical basis and guidance for the noise control of the train and overcomes the shortcomings of the traditional method, which has high test efficiency and can be carried out during the working state of the targeted machine. The OTPA model is established from the aspects of "path reference point-target point" and "sound source reference point-target point". As for the mechanism of the noise transmission path, an assumption is made that the direct sound propagation is ignored, and the symmetric sound source and the symmetric path are merged. Using the operational test data and the OTPA method, combined with the results of spherical array sound source identification, the path contribution and sound source contribution of the interior noise are analyzed, respectively, from aspects of the total value and spectrum. The results show that the OTPA conforms to the calculation results of the spherical array sound source identification. At low speed, the contribution of the floor path and the contribution of the bogie sources are dominant. When the speed is greater than 300 km/h, the contribution of the roof path is dominant. Moreover, for the carriage with a pantograph, the lifted pantograph is an obvious source. The noise from the exterior sources of the train transfer into the interior mainly through the form of structural excitation, and the contribution of air excitation is non-significant. Certain analyses of train parts provide guides for the interior noise control.

Flow Induced Interior Noise Prediction of a Passenger Car

2016 ◽  
Vol 9 (3) ◽  
pp. 1053-1062 ◽  
Author(s):  
Alexander Schell ◽  
Vincent Cotoni
Keyword(s):  
Interior Noise ◽  
Noise Prediction ◽  
Passenger Car

scholarly journals Identification of Sleeper Support Conditions Using Mechanical Model Supported Data-Driven Approach

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3609
Author(s):  
Mykola Sysyn ◽  
Michal Przybylowicz ◽  
Olga Nabochenko ◽  
Lei Kou
Keyword(s):  
High Speed ◽  
Experimental Studies ◽  
Dynamic Interaction ◽  
Theoretical Research ◽  
Rolling Stock ◽  
Monitoring Methods ◽  
Beam Dynamic ◽  
Track Geometry ◽  
Data Driven Approach ◽  
Support Conditions

The ballasted track superstructure is characterized by a relative quick deterioration of track geometry due to ballast settlements and the accumulation of sleeper voids. The track zones with the sleeper voids differ from the geometrical irregularities with increased dynamic loading, high vibration, and unfavorable ballast-bed and sleeper contact conditions. This causes the accelerated growth of the inhomogeneous settlements, resulting in maintenance-expensive local instabilities that influence transportation reliability and availability. The recent identification and evaluation of the sleeper support conditions using track-side and on-board monitoring methods can help planning prevention activities to avoid or delay the development of local instabilities such as ballast breakdown, white spots, subgrade defects, etc. The paper presents theoretical and experimental studies that are directed at the development of the methods for sleeper support identification. The distinctive features of the dynamic behavior in the void zone compared to the equivalent geometrical irregularity are identified by numeric simulation using a three-beam dynamic model, taking into account superstructure and rolling stock dynamic interaction. The spectral features in time domain in scalograms and scattergrams are analyzed. Additionally, the theoretical research enabled to determine the similarities and differences of the dynamic interaction from the viewpoint of track-side and on-board measurements. The method of experimental investigation is presented by multipoint track-side measurements of rail-dynamic displacements using high-speed video records and digital imaging correlation (DIC) methods. The method is used to collect the statistical information from different-extent voided zones and the corresponding reference zones without voids. The applied machine learning methods enable the exact recent void identification using the wavelet scattering feature extraction from track-side measurements. A case study of the method application for an on-board measurement shows the moderate results of the recent void identification as well as the potential ways of its improvement.

Advanced open rotor noise prediction

2014 ◽  
Vol 118 (1208) ◽  
pp. 1125-1135 ◽  
Author(s):  
M. J. Kingan
Keyword(s):  
High Speed ◽  
Broadband Noise ◽  
Current Status ◽  
Prediction Methods ◽  
Noise Prediction ◽  
Acoustic Data ◽  
Rotor Noise ◽  
Future Challenges ◽  
Open Rotor ◽  
Development And Validation

Abstract The purpose of this paper is to describe the current status of open rotor noise prediction methods and to highlight future challenges in this area. A number of analytic and numerical methods are described which can be used for predicting ‘isolated’ and ‘installed’ open rotor tonal noise. Broadband noise prediction methods are also described and it is noted that further development and validation of the current models is required. The paper concludes with a discussion of the analytical methods which are used to assess the acoustic data collected during the high-speed wind-tunnel testing of a model scale advanced open rotor rig.

scholarly journals Jet-Surface Interaction Test: Far-Field Noise Results

2013 ◽  
Vol 135 (7) ◽  
Author(s):  
Clifford A. Brown
Keyword(s):  
High Speed ◽  
Radial Distance ◽  
Jet Noise ◽  
Surface Interaction ◽  
Shielding Effect ◽  
Noise Prediction ◽  
Far Field ◽  
Wide Range ◽  
Field Noise ◽  
Surface Length

Many configurations proposed for the next generation of aircraft rely on the wing or other aircraft surfaces to shield the engine noise from the observers on the ground. However, the ability to predict the shielding effect and any new noise sources that arise from the high-speed jet flow interacting with a hard surface is currently limited. Furthermore, quality experimental data from jets with surfaces nearby suitable for developing and validating noise prediction methods are usually tied to a particular vehicle concept and, therefore, very complicated. The Jet-Surface Interaction Tests are intended to supply a high quality set of data covering a wide range of surface geometries and positions and jet flows to researchers developing aircraft noise prediction tools. The initial goal is to measure the noise of a jet near a simple planar surface while varying the surface length and location in order to: (1) validate noise prediction schemes when the surface is acting only as a jet noise shield and when the jet-surface interaction is creating additional noise, and (2) determine regions of interest for future, more detailed, tests. To meet these objectives, a flat plate was mounted on a two-axis traverse in two distinct configurations: (1) as a shield between the jet and the observer and (2) as a reflecting surface on the opposite side of the jet from the observer. The surface length was varied between 2 and 20 jet diameters downstream of the nozzle exit. Similarly, the radial distance from the jet centerline to the surface face was varied between 1 and 16 jet diameters. Far-field and phased array noise data were acquired at each combination of surface length and radial location using two nozzles operating at jet exit conditions across several flow regimes: subsonic cold, subsonic hot, underexpanded, ideally expanded, and overexpanded supersonic. The far-field noise results, discussed here, show where the jet noise is partially shielded by the surface and where jet-surface interaction noise dominates the low frequency spectrum as a surface extends downstream and approaches the jet plume.

Improving the Efficiency of High-Speed AC Contact Suspension

2021 ◽  
Vol 5 (5) ◽  
pp. 39-43
Author(s):  
Maksim V. SHEVLYUGIN ◽  
◽  
Daria V. SEMENOVA ◽  
Keyword(s):  
Power Supply ◽  
High Speed ◽  
Single Phase ◽  
New Technologies ◽  
Alternating Current ◽  
Rolling Stock ◽  
New Materials ◽  
High Speed Railway ◽  
Electric Rolling Stock ◽  
Electrified Railways

When developing a high-speed contact suspension for railways electrified with alternating current, it is important to ensure that the electric rolling stock passes the neutral insert without turning off the current and without reducing the speed of movement. The article provides an analysis of previously developed devices in the field of power supply of electrified railways of single-phase alternating current, in which an attempt was made to pass an electric rolling stock of a neutral insert without disconnecting the load. The device of isolating coupling of a catenary and a neutral insert for high-speed railway lines electrified on alternating current is described. In this case, the passage of the neutral insert is carried out under current and braking of the electric rolling stock will not occur. Among other things, to improve the efficiency of high-speed contact suspension for railways electrified with alternating current, it is proposed to use new materials and new technologies that can be used in the device of insulating coupling of the catenary

Sign in / Sign up

Export Citation Format

Share Document