Interface Structure, Adhesion, and Ion Beam Processing

The growth of Ag films deposited on various substrate materials such as MoS2, mica, graphite, and MgO has been investigated extensively using the in situ electron microscopy technique. The three stages of film growth, namely, the nucleation, growth of islands followed by liquid-like coalescence have been observed in both the vacuum vapor deposited and ion beam sputtered thin films. The mechanisms of nucleation and growth of silver films formed by ion beam sputtering on the (111) plane of silicon comprise the subject of this paper. A novel mode of epitaxial growth is observed to that seen previously.The experimental arrangement for the present study is the same as previous experiments, and the preparation procedure for obtaining thin silicon substrate is presented in a separate paper.

Download Full-text

Effects of Ion Beam Milling on Surface Topography

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100070862 ◽

1973 ◽

Vol 31 ◽

pp. 84-85

Author(s):

P.G. Pawar ◽

P. Duhamel ◽

G.W. Monk

Keyword(s):

Surface Topography ◽

Ion Beam ◽

Solid Material ◽

Beam Current ◽

Atomic Mass ◽

Micro Milling ◽

Ion Milling ◽

Controlled Atmospheres ◽

Milling Operations ◽

Sufficient Energy

A beam of ions of mass greater than a few atomic mass units and with sufficient energy can remove atoms from the surface of a solid material at a useful rate. A system used to achieve this purpose under controlled atmospheres is called an ion miliing machine. An ion milling apparatus presently available as IMMI-III with a IMMIAC was used in this investigation. Unless otherwise stated, all the micro milling operations were done with Ar+ at 6kv using a beam current of 100 μA for each of the two guns, with a specimen tilt of 15° from the horizontal plane.It is fairly well established that ion bombardment of the surface of homogeneous materials can produce surface topography which resembles geological erosional features.

Download Full-text

Nucleation and Early Growth of Sputtered thin Films

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100069570 ◽

1970 ◽

Vol 28 ◽

pp. 516-517

Author(s):

Dudley M. Sherman ◽

Thos. E. Hutchinson

Keyword(s):

Thin Films ◽

Electron Beam ◽

Ion Beam ◽

Ion Source ◽

Water Cooling ◽

Stages Of Growth ◽

Lens Assembly ◽

Microscope Technique ◽

Ion Beam Sputter Deposition

The in situ electron microscope technique has been shown to be a powerful method for investigating the nucleation and growth of thin films formed by vacuum vapor deposition. The nucleation and early stages of growth of metal deposits formed by ion beam sputter-deposition are now being studied by the in situ technique.A duoplasmatron ion source and lens assembly has been attached to one side of the universal chamber of an RCA EMU-4 microscope and a sputtering target inserted into the chamber from the opposite side. The material to be deposited, in disc form, is bonded to the end of an electrically isolated copper rod that has provisions for target water cooling. The ion beam is normal to the microscope electron beam and the target is placed adjacent to the electron beam above the specimen hot stage, as shown in Figure 1.

Download Full-text